Panduit NKP5E88MBL Installation guide

Category
Wire connectors
Type
Installation guide

This manual is also suitable for

INSTALLATION INSTRUCTIONS NK406A
© Panduit Corp. 2008
Page 1 of 2
NETKEY
NETWORK COMPONENTS
CONTRACTOR GRADE
For Technical Support: www.panduit.com/resources/install_maintain.asp
1
Puck
Notch
Orient jack
as shown
Label
(NKSPB)
NETKEY Category 5e & 6 Jack Modules
Part Number: NKP5E88M**, NK688M**
2
CWST
Trim pair separator and/or
filler if present.
3
T568AT568B
P4 P3
P1 P2
P4 P2
P1 P3
T568 BA BA
T568 BA BA
4
Do not untwist
more then 1/8"
from the IDC
tower
Option 1 Option 2
(T568B shown)
5
PDT110
Tool
(T568B shown)
Retention
Cap
** Denotes color.
INSTALLATION INSTRUCTIONS NK406A
Page 2 of 2
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
E-mail:
Fax:
866-449-1702
T568 BA BA
7
8
9
10 11
Notes:
1. For specified performance, follow TIA/EIA 568-B installation guidelines.
2. Jack Modules can terminate PVC or Plenum rated 22-26 AWG solid or stranded IWC cable with 0.048 inch (1.2 mm)
maximum insulated conductor outside diameter.
3. Jack Modules may be re-terminated a minimum of 20 times.
4. For technical and performance information, consult PANDUIT Technical Support.
As with all Communication Components, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the
network interface.
4. Use caution when installing or modifying communication wiring.
  • Page 1 1
  • Page 2 2

Panduit NKP5E88MBL Installation guide

Category
Wire connectors
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI