Insignia NS-DPF3G User manual

Brand: Insignia

Model: NS-DPF3G

Category: Digital photo frames

Type: User manual

Insignia NS-DPF3G: This 3.5" digital picture frame with a built-in Li-polymer battery and a 3.5-inch (89 mm) panel size can display pictures in JPG/JPEG format from its internal memory or from an inserted SD, SDHC, or MMC memory card. The frame can automatically play a slideshow of pictures stored on the memory card or the internal memory after a brief delay when you turn it on. You can also manually navigate through pictures using the left and right arrow buttons on the side of the frame.

Quick Setup Guide

NS-DPF3G 3.5" Digital Picture Frame

Features

Top view Side views

Package

contents

• Digital picture frame

• Carrying case

• USB cable

• AC power adapter

• Quick Setup Guide

Setting up your frame

Positioning the frame

• Pull out the stand and place

your frame on a at surface.

• Slide the frame into its carrying case to take it with you.

Power/Exit

button

Left arrow

button 

Menu/Enter

button

Right arrow

button 

USB port

SD/MMC slot

Using your frame

Turning the frame on and o

1 Press and hold the power button to turn the frame on.

2 Press and hold the power button again to turn the frame o.

Navigating menus

1 Press twice to open the Main menu during slideshows.

2 Press  to navigate left or up, and press  to navigate right or down.

3 To change a setting, press to open the menu selection, press  or  to scroll through the available options,

then press to save your changes.

• Press to return to the previous screen while in the Settings menu.

Viewing your pictures

1 Press until the Main menu opens, press  and  to highlight the memory device you want to

access (internal memory or memory card), then press to begin a slideshow.

2 Press again to pause the slideshow and display the pop-up menu.

Switching between internal memory and a memory card (not included)

By default, your frame searches for an inserted memory card. When you turn on your frame, it automatically plays a

slideshow of pictures stored on the memory card after a brief delay.

1 To switch from the memory card to the internal memory, press until the Main menu appears.

2 Press  and  to switch between the memory card and the internal memory, then press .

Copying pictures to your frame

You can copy pictures to your frame from your computer or from a memory card.

To copy pictures using your computer:

1 Turn on your computer, then connect the provided USB cable to your digital picture frame and to an available USB

port on your computer.

Note: Do not press while copying pictures to or from your frame or deleting pictures from your frame. Doing so

will interrupt the connection between the frame and your computer.

2 Open My Computer or Computer (in Microsoft® Windows® operating systems). The frame’s internal memory

and any inserted memory cards appear as separate “removable disks.”

3 Drag and drop (or copy and paste) les from your computer to the frame’s internal memory or to your frame’s

inserted memory card. You can also drag and drop les from your frame’s inserted memory card to its internal

memory using this method.

4 When you are done copying les, safely disconnect the frame from your computer by following your operating

system’s standard procedures or by pressing .

Fully chargedCharging

Charging the battery

When the battery is fully charged, it lasts about 2 hours.

Charging using the mini USB cable

• Plug the mini USB cable plug into the picture frame, then plug

the larger USB connector into your computer and turn the

computer on. The picture frame turns on, and a connection is

established with your computer. This connection also allows you

to transfer pictures from your computer to your frame or delete

pictures from your frame using your computer. For more details,

see Copying pictures to your frame.

Press to exit the computer connection. You will no longer be

able to transfer les to or from your frame or delete les from

your frame, but you will be able to access the frame‘s functions

and watch slideshows while the battery is charging.

Charging using the AC power adapter

• Plug the cable’s mini USB plug into the picture frame, then plug

the power adapter into an AC power outlet. The picture frame

turns on and begins charging. You can turn o the frame while

it is charging.

Adding a memory card

• Insert a memory card into the memory card slot (optional). Your

frame is compatible with SD, SDHC, and MMC memory cards.

• If the frame is already on when you insert the card, a

slideshow of the card’s pictures automatically plays.

Specications

Picture format JPG/JPEG

Panel size 3.5 inch (89 mm)

Memory card formats SD, SDHC, MMC

Power source USB 5V

Power consumption < 2W

Operating temperature 41~95°F (5~35°C)

Weight 0.20 lb. (0.09 kg)

Dimensions (W × H × D) 3.7 × 3.0 × 0.5 inches

(95 × 77 × 13 mm)

Built-in battery Li-polymer

Troubleshooting

• Make sure that the memory card is one of the supported formats, and that it is

inserted correctly.

• Make sure that the pictures are JPEG format.

• If picture loading is slow, reduce the size of your pictures on a computer before

viewing them on the frame.

• Some issues may be resolved by turning the frame o and then on again. In

extreme cases, you may need to insert a straightened paperclip into the RESET

hole on the back of frame.

Important safety instructions

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this device near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other devices

(including ampliers) that produce heat.

9 Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the device.

10 Only use attachments/accessories specied by the manufacturer.

11 Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or

sold with the device . When a cart is used, use caution when moving the cart/device

combination to avoid injury from tip-over.

12 Unplug this device during lightning storms or when unused for long periods of time.

13 Refer all servicing to qualied service personnel. Servicing is required when the device has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the device, the device has been exposed to rain or

moisture, does not operate normally, or has been dropped.

14 To reduce the risk of re or electric shock, do not expose this device to rain, moisture,

dripping, or splashing, and no objects lled with liquids, such as vases, shall be placed on it.

Enterprise Services, Inc. Registered in some countries. All other products and brand names are

trademarks of their respective owners.

ENGLISH 09-0401

Using the Pop-up Menu

A number of dierent functions can be accessed using your frame’s pop-up menu. To

access the pop-up menu, press during a slideshow or while browsing single pictures.

If a slideshow is playing, it will be paused while the pop-up menu is displayed.

Note: The pop-up menu cannot be accessed while viewing thumbnails.

1 Press

 or  to select functions in the pop-up menu. Press to conrm a selection.

2 Press to hide the pop-up menu and return to Slideshow or Browse mode.

Selecting in the pop-up menu will also hide the pop-up menu and

return you to Slideshow or Browse mode.

Rotating, zooming, and panning pictures

1 Highlight the picture you want to rotate, zoom, or pan in Browse or Slideshow mode.

(You cannot access the menu while in Thumbnail mode.)

2 Press to access the menu.

3 To rotate a picture, press  or  to select , then press to rotate the picture

90 degrees. Or, to zoom and pan a picture, press  or  to select , then press to

zoom the picture. While a picture is zoomed, you can pan the image by highlighting one

of the , , , buttons, then pressing .

4 Press to exit the menu.

To copy pictures from a memory card:

1 Insert a memory card containing pictures into the frame’s memory card slot.

A slideshow of pictures on the card plays automatically.

2 Select the picture you want to copy in Browse or Slideshow mode.

3 Press to open the pop-up menu.

4 Press

 or  to select the icon. A menu appears on the screen.

• To copy only the picture currently being viewed, select Copy One, press

to select Yes, then press again.

• To copy all pictures on the memory card, select Copy All, press to select Yes,

then press again.

Note: Pictures cannot be copied from the frame’s internal memory to a memory card

using the frame alone.

Deleting pictures from the frame‘s internal memory

To delete pictures:

1 Select the picture you want to delete in Browse or Slideshow mode.

2 Press to open the pop-up menu.

3 Press  or  to select the icon. A menu appears on the screen.

• To delete only the picture currently being viewed, select Delete One, press

to select Yes, then press again.

• To delete all pictures in the frame’s internal memory, select Delete All, press

to select Yes, then press again.

Note: Pictures cannot be deleted from an inserted memory card using the frame alone.

Note: You can also use your computer to delete les from the frame or from an inserted

memory card.

Browsing pictures

To browse pictures from Slideshow mode:

1 While in Slideshow mode, press to open the pop-up menu. The slideshow pauses.

2 Press  or  to select or .

3 Select to view the previous picture in the slideshow, or select to view the

next picture.

To browse pictures from Browse mode:

1 Press

 or  to select .

2 Press . The icon changes from to .

• Press to hide the pop-up menu and enter Browse mode. You may now view

pictures one at a time.

To return to Slideshow mode, press to display the pop-up menu.

3 Press  or  to select , then press . changes back to .

4 Press to hide the pop-up menu and enter Slideshow mode.

Changing settings

1 From the Main menu, press  and  to highlight the Settings menu icon ,

then press to enter the Settings menu.

2 Press

 and  to highlight either System Setup or Photo Setup, then

press to enter the menu.

3 Press  and  to highlight a setting, then press to enter the setting.

4 Press  and  to change the setting, then press to conrm your selection.

Tip: Press to return to the previous menu screen.

The settings in the System Setup menu allow you to control the frame’s system-wide settings:

• Language: Sets the language used for on-screen menus and displays. Available

settings are English, French, and Spanish.

• Brightness: Sets the brightness of the LCD screen.

• Auto-Power O: Sets the amount of time that must pass after a button is pressed

before the frame automatically shuts o. Available settings are O, 30 minutes,

1 hour, 2 hours, 4 hours, and 8 hours.

• Reset Default: Resets the frame to factory default settings.

• Version: Displays the frame’s current rmware version.

The settings in the Photo Setup menu allow you to control the frame’s settings for

viewing pictures:

• Display Mode: Available settings are Slideshow, Browse Mode, and Thumbnail. This

setting controls what your frame does when you select a memory device from the Main menu.

• Slideshow: A slideshow of pictures contained in the selected memory device

automatically begins.

• Browse Mode: The rst picture contained in the selected memory device is

automatically displayed. Press  or  to scroll through the pictures.

• Thumbnail: Thumbnails of the pictures contained in the selected memory device

are displayed. Press  or  to highlight the picture you want to view, then press

to display the picture.

• Slideshow Time: Sets the amount of time between picture transitions in a slideshow

5 seconds, 10 seconds, 30 seconds, 60 seconds, 60 minutes, and 24 hours.

• Slideshow Eect: Sets the special eect to be used for slideshow picture transitions.

Available settings are Partition, Erase, Blinds, Random lines, Grid, Cross, Spiral,

Rect, Close, Random, and Snake.

Insignia NS-DPF3G User manual

Brand: Insignia

Model: NS-DPF3G

Category: Digital photo frames

Type: User manual

Download PDF

report

Insignia NS-DPF3G User manual

Insignia NS-DPF3G User manual

Related papers

Other documents