8" Digital Picture Frame
3
www.insigniaproducts.com
Safety information
Always follow these basic safety precautions when using your
digital picture frame. This will reduce the risk of fire, electric
shock, and injury.
Placement—To prevent fire or electric shock, do not expose this
digital picture frame to rain or moisture. To prevent it from falling
do not place it on an unstable cart, stand, tripod, bracket, or
table. Keep the unit away from strong magnets, heat sources,
direct sunlight, and excessive dust.
Installation—Make sure that the digital picture frame is used in
accordance with the instructions and illustrations provided in
this manual.
Objects and liquids—Do not push objects of any kind into the
digital picture frame through openings. Do not spill or spray
liquid of any kind on or in the digital picture frame (this may
result in a fire or electric shock). Do not place anything heavy on
the unit. To ensure proper ventilation and proper operation,
never cover or block the slots and openings with a cloth or other
material.
Disassembly—Do not attempt to disassemble the frame. There
is a risk of electric shock. Contact qualified service personnel if
your digital picture frame is in need of repair.
Cleaning the digital picture frame—When cleaning, make
sure the frame is unplugged from the power source. Use the
supplied cleaning cloth, or a cloth slightly dampened with water,
for cleaning the exterior of the frame only.
Warnings
To reduce the risk of fire or shock hazard, do not expose
the frame to rain or moisture and unplug the frame during
lightning storms.
To prevent the risk of electric shock, do not remove the
cover. There are no user-serviceable parts inside. Refer all
servicing to qualified personnel.
There is a risk of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type of
battery.