JONATHAN Y JYL6005B Installation guide

Brand
JONATHAN Y
Model
JYL6005B
Type
Installation guide

JONATHAN Y JYL6005B is a portable lamp with a polarized plug for safety, a harp to hold the shade, and a socket ring to secure the bulb. It requires assembly, which takes approximately 6 minutes. The lamp has a maximum wattage of 100 watts for incandescent bulbs, 23 watts for CFL bulbs, and 12 watts for LED bulbs. It comes with a 9-watt LED bulb. The lamp is suitable for use on a level surface and can be used for various purposes, such as providing ambient lighting in a room or illuminating a specific area for reading or working.

JONATHAN Y JYL6005B is a portable lamp with a polarized plug for safety, a harp to hold the shade, and a socket ring to secure the bulb. It requires assembly, which takes approximately 6 minutes. The lamp has a maximum wattage of 100 watts for incandescent bulbs, 23 watts for CFL bulbs, and 12 watts for LED bulbs. It comes with a 9-watt LED bulb. The lamp is suitable for use on a level surface and can be used for various purposes, such as providing ambient lighting in a room or illuminating a specific area for reading or working.

WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN.
WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT
BREAKER BEFORE INSTALLATION.
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
Model# JYL6005A /JYL6005B
Product Dimensions: 15.75"L X 15.75"W X
60"H
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
f
or sa
f
e use an
d
i
ns
t
a
ll
a
ti
on
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
tl t th l if it till d t fit t t lifi d l t i i N ith t i
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
A Lamp Base 1X F socket ring 1X
B tube 1X G Bulb 1X
C tube 1X H Shade 1X
D tube 1X I cord and switch 1X
E harp 1X
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list If any part is missing or damaged do not attempt to assemble the product
PREPARATION
contents
list
.
If
any
part
is
missing
or
damaged
,
do
not
attempt
to
assemble
the
product
.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
11
2
E
F
G
H
D
E
C
D
Step 1
A
B
I
Step
1
Put the lamp base(A)on the floor . Put the light on a level surface to check
Inster the tube(B,C)into the base in order
Gently pull the cord (I )and inster the tube(D)into the Tube(C) if every thing is stable.
Put the har
p(
E
)
onthe socket and ti
g
hten the socket rin
g(
F
)
.
A
Put
the
harp(E)onthe
socket
and
tighten
the
socket
ring(F).
Inster the bulb(G) in to the socket
Put the shade(H)on the harp(E).
ENJOY YOUR LAMP
  • Page 1 1
  • Page 2 2

JONATHAN Y JYL6005B Installation guide

Brand
JONATHAN Y
Model
JYL6005B
Type
Installation guide

JONATHAN Y JYL6005B is a portable lamp with a polarized plug for safety, a harp to hold the shade, and a socket ring to secure the bulb. It requires assembly, which takes approximately 6 minutes. The lamp has a maximum wattage of 100 watts for incandescent bulbs, 23 watts for CFL bulbs, and 12 watts for LED bulbs. It comes with a 9-watt LED bulb. The lamp is suitable for use on a level surface and can be used for various purposes, such as providing ambient lighting in a room or illuminating a specific area for reading or working.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents