Amperes CS518 User manual

Brand: Amperes

Model: CS518

Type: User manual

Amperes CS518 is a 5” 20W 100V Co-Axial Ceiling Speaker that is ideal for various applications, including boutiques, residences, offices, and lobbies. It features a square or rectangular shape that blends seamlessly with most ceiling fittings. The speaker's compact size allows for easy installation in tight spaces.

The CS518 delivers clear and crisp sound thanks to its 5” co-axial driver. Its power output can be adjusted to suit the size of the installation area, with options ranging from 2.5W to 20W. The speaker's 100V transformer provides high-impedance operation, enabling long cable runs without signal loss.

Amperes CS518 is a 5” 20W 100V Co-Axial Ceiling Speaker that is ideal for various applications, including boutiques, residences, offices, and lobbies. It features a square or rectangular shape that blends seamlessly with most ceiling fittings. The speaker's compact size allows for easy installation in tight spaces.

The CS518 delivers clear and crisp sound thanks to its 5” co-axial driver. Its power output can be adjusted to suit the size of the installation area, with options ranging from 2.5W to 20W. The speaker's 100V transformer provides high-impedance operation, enabling long cable runs without signal loss.

Guide to Installation

Dismantling speaker grille

www.ampereselectronics.com

Introduction

Cut the ceiling hole

150 mm

Cut a square hole at the ceiling with the dimensions of 150 x 150

mm

Connecting the speaker cableMounting speaker to ceiling

Securing the speaker to the ceiling

Installing the grille to complete the installation

CS518 matches other fittings at ceiling where most of them are in square or

rectangular shapes. It’s size is almost similar to square shape light fittings and is

loaded with co-axial 5” driver, delivering clear and crispy sound.

It is suitable for boutiques, residence, offices as well as lobbies.

150 mm

amperes

Speaker Clamp

Speaker Clamp

Speaker Grille

Push upwards Push upwards

Dismantle the speaker grilles from the speaker assembly by

pushing the speaker clamp upwards gently to avoid denting the

grille.

+

-

+-

8 Ω

20W

-

20W

10W

10W

5W

5W

2.5W

2.5W

1.5W

70V

100V

Connect the speaker cable from the ceiling to the connectors

provided. Ensure polarity of cable is correctly terminated to the

terminals. Pre-select the power output required to suit the installa-

tion area before mounting the speaker to the ceiling.

Speaker Hole

Speaker Cable

(in conduit)

i) Close the Speaker

Clamp to allow the unit to

be inserted to the speaker

hole.

ii) Push to speaker

assembly to the speaker

hole.

Use a screw driver / electric screw to turn the screw of speaker

clamp (A) in clockwise direction to fasten the speaker assembly

to the ceiling. Ensure a tight clamping for a secure fitting.

amperes

The final step shall be attaching the speaker grille to the speaker

assembly. The grill should be fitted without glue, this would enable

easy future retraction if the need arises.

Gently push the speaker grille to the slot

without denting the wire mesh.

Ceiling

Precision Design, absolute Confidence

Instruction Manual

CS518 5” 20W 100V Square Co-Axial Ceiling Speaker

5” 20W 100V Co-Axial Ceiling Speaker

ISO 9001: 2015

Design & Manufacture of Public Address Equipment and Systems

Certicate No. 16895 / A / 0001 / UK / En

Ceiling

Cable terminal

Cable terminal Power selection

A

A

A

A

1

Amperes CS518 User manual

Brand: Amperes

Model: CS518

Type: User manual

Amperes CS518 is a 5” 20W 100V Co-Axial Ceiling Speaker that is ideal for various applications, including boutiques, residences, offices, and lobbies. It features a square or rectangular shape that blends seamlessly with most ceiling fittings. The speaker's compact size allows for easy installation in tight spaces.

The CS518 delivers clear and crisp sound thanks to its 5” co-axial driver. Its power output can be adjusted to suit the size of the installation area, with options ranging from 2.5W to 20W. The speaker's 100V transformer provides high-impedance operation, enabling long cable runs without signal loss.

Related papers

Other documents