Axis Q1941-E User manual

Q1941-E
Axis
Brand
Axis
Model
Q1941-E
Type
User manual

This manual is also suitable for

Axis Q1941-E is a high-performance thermal network camera designed for perimeter protection and intrusion detection. It features excellent image quality, advanced analytics, and a rugged design. With its built-in AXIS Perimeter Defender application, it can accurately detect and track intruders, even in challenging conditions like complete darkness, fog, and smoke. The camera's thermal imaging technology allows it to see through these obscurants, providing 24/7 surveillance.

Axis Q1941-E is a high-performance thermal network camera designed for perimeter protection and intrusion detection. It features excellent image quality, advanced analytics, and a rugged design. With its built-in AXIS Perimeter Defender application, it can accurately detect and track intruders, even in challenging conditions like complete darkness, fog, and smoke. The camera's thermal imaging technology allows it to see through these obscurants, providing 24/7 surveillance.

AXISQ19Series
AXISQ1941-EThermalNetworkCamera
AXISQ1942-EThermalNetworkCamera
UserManual
AXISQ19Series
TableofContents
Solutionoverview...........................................3
Aboutperimeterprotection.......................................3
Setup.....................................................5
Howtoaccesstheproduct........................................5
Abouttheproduct'sbuilt-inhelp...................................6
Aboutapplications..............................................6
Howtoconnectaashingbeacon..................................7
Howtoconnectanetworkhornspeaker.............................8
Howtoreducebandwidthandstorage..............................9
Dailyuse..................................................10
Aboutcolorpalettes.............................................10
HowtostabilizeashakyimagewithElectronicImageStabilization(EIS)...10
Troubleshooting............................................11
Howtoresettofactorydefaultsettings.............................11
Howtocheckthecurrentrmware.................................11
Howtoupgradethermware.....................................11
Technicalissues,cluesandsolutions................................12
Performanceconsiderations.......................................13
Specications..............................................14
Productoverview................................................14
LEDIndicators..................................................14
SDcardslot....................................................15
Buttons.......................................................15
Connectors....................................................15
2
AXISQ19Series
Solutionoverview
Solutionoverview
1
AXISQ1941–E/Q1942–EwithAXISPerimeterDefender
2
Hornspeaker
3
Flashingbeacon
4
PTZnetworkcamera
5
Doorcontroller
6
Surveillancecenter
Aboutperimeterprotection
Forareasinneedofintrusiondetection,youcansetupperimeterprotectionusingthermalcameraswithanalytics.Themain
objectiveforperimeterprotectionistodetectathreatoranactualintrusionattheearliestpossiblestage.
Tosetupperimeterprotection,youneedtoinstallananalyticsapplicationforperimetersurveillanceandprotectiononyour
thermalcamera.AxisprovidestheAXISPerimeterDefenderapplicationforthispurpose.YoucanreadmoreaboutAXISPerimeter
Defenderatwww.axis.com.
3
AXISQ19Series
Solutionoverview
•Useaashingbeacon(3)toletpossibleintrudersknowthatyourperimeterisprotected(seeHowtoconnectaashing
beacononpage7).
•Tofurtherwarnanddeter,connectahornspeaker(2)thatplaysapre-recordedwarningmessage(seeHowtoconnecta
networkhornspeakeronpage8).
4
AXISQ19Series
Setup
Setup
Howtoaccesstheproduct
AXISIPUtilityandAXISCameraManagementarerecommendedmethodsforndingAxisproductsonthenetworkandassigning
themIPaddressesinWindows®.Bothapplicationsarefreeandcanbedownloadedfromaxis.com/support
Theproductcanbeusedwiththefollowingbrowsers:
•Chrome
TM
(recommended),Firefox
®
,Edge
®
,orOpera
®
withWindows
®
•Chrome
TM
(recommended)orSafari
®
withOSX
®
•Chrome
TM
orFirefox
®
withotheroperatingsystems.
Ifyouneedmoreinformationaboutrecommendedbrowsers,gotoaxis.com/browser-support
Howtoaccesstheproductfromabrowser
1.Startawebbrowser.
2.EntertheIPaddressorhostnameoftheAxisproductinthebrowser’saddresseld.
ToaccesstheproductfromaMaccomputer(OSX),gotoSafari,clickonBonjourandselecttheproductfromthe
drop-downlist.ToaddBonjourasabrowserbookmark,gotoSafari>Preferences.
IfyoudonotknowtheIPaddress,useAXISIPUtilitytolocatetheproductonthenetwork.Forinformationabout
howtodiscoverandassignanIPaddress,seethedocumentAssignanIPAddressandAccesstheVideoStreamonAxis
Supportwebataxis.com/support
3.Enteryourusernameandpassword.Ifthisisthersttimetheproductisaccessed,therootpasswordmustrstbe
congured.
4.Theproduct’sliveviewpageopensinyourbrowser.
Aboutsecurepasswords
Important
Whensettingtheinitialpassword,thepasswordissentincleartextoverthenetwork.Ifthereisariskofnetworksnifng,
rstsetupasecureandencryptedHTTPSconnectionbeforeresettingthepasswords.
Thedevicepasswordistheprimaryprotectionforthedataandservices.Axis’devicesdonotimposeapasswordpolicyasdevicesmay
beusedinvarioustypesofinstallations,buttoprotectyourdatadothefollowing:
•Don’tusethedefaultpasswordthatcomeswiththedevices.
•Useapasswordwithatleast8characters,preferablyusingapasswordgenerator.
•Don’texposethepassword.
•Changepasswordatarecurringinterval,atleastonceayear.
Setapasswordfortherootaccount
Important
Thedefaultadministratorusernamerootcannotbedeleted.Ifthepasswordforrootislost,thedevicemustberesetto
thefactorydefaultsettings.
Thedefaultrootaccounthasfullprivilegesandshouldbereservedforadministrativetasks.Alwayscreateauseraccountwithlimited
privilegesfordailyuse.Thisreducestheexposureoftheadministrativeaccount.
5
AXISQ19Series
Setup
1.Makesuretofollowtheinstructionsaboutsecurepasswords,seeAboutsecurepasswordsonpage5.
2.Typeapasswordandthenretypeittoconrmthespelling.
3.ClickCreatelogin.Thepasswordhasnowbeencongured.
Abouttheproduct'sbuilt-inhelp
Youcanaccessthebuilt-inhelpthroughyourproduct’swebpage.Thehelpprovidesmoredetailedinformationontheproduct’s
featuresandtheirsettings.
Aboutapplications
AXISCameraApplicationPlatform(ACAP)isanopenplatformthatenablesthirdpartiestodevelopanalyticsandotherapplications
forAxisproducts.Tondoutmoreaboutavailableapplications,downloads,trialsandlicenses,gotoaxis.com/applications
TondtheusermanualsforAxisapplications,gotoaxis.com
Note
•Severalapplicationscanrunatthesametimebutsomeapplicationsmightnotbecompatiblewitheachother.Certain
combinationsofapplicationsmightrequiretoomuchprocessingpowerormemoryresourceswhenruninparallel.Verify
thattheapplicationsworktogetherbeforedeployment.
Aboutapplicationlicences
Someapplicationsneedalicensetorun.Licensescanbeinstalledintwoways:
•Automaticinstallation—requiresaccesstotheInternet
•Manualinstallation—obtainthelicensekeyfromtheapplicationvendoranduploadthekeytotheAxisproduct
Torequestalicense,theAxisproductserialnumber(S/N)isrequired.Theserialnumbercanbefoundontheproductlabeland
underAbout.
6
AXISQ19Series
Setup
Howtoinstalltheapplicationonthecamera
Note
Thesoftwarelicenseisonlyvalidforonecamera.Youcannotactivatethesoftwareonanothercamerawithoutanew
registrationkey.
1.Forproductswithrmware7.10orlater,gotoSettings>Appstoinstalltheapplication.
Forproductswithrmware6.50orprevious,gotoSetup>Applicationstoinstalltheapplication.
2.Uploadtheapplicationle(.eap)tothecamera.
3.Activatethelicense.Ifyou’reonline,enterthelicensecode.Theapplicationautomaticallyactivatesthelicense.
Seetheproduct’sbuilt-inhelpforfurtherinstructions.
4.Tosetuptheapplication,gotoHowtoaccesstheapplicationsettings.
Howtoactivatethelicensewhenyou’reofine
Toactivatethelicenseyouneedalicensekey.Ifyoudon’thavealicensekeyonthecomputer,dothefollowing:
1.Gotowww.axis.com
2.TogetalicensekeyyouneedthelicensecodeandtheAxisproductserialnumber.
3.Savethelicensekeyleonthecomputertobeabletoselectitwhentheapplicationasksforit.
Howtoaccesstheapplicationsettings
1.Toaccessthesettingsforaspecicapplication,dooneofthefollowing:
-Forproductswithrmware7.10orlater,gotoSettings>Apps,selecttheapplicationandclickOpento
opentheapplicationsettings.
-Forproductswithrmware6.50orprevious,clickontheLiveviewbuttonorgotoSetup>Applications>
[Applicationname]andclickonthesetuplinktoopentheapplicationsettings.
Howtoconnectaashingbeacon
Useaashingbeacontoletpossibleintrudersknowthatyourperimeterisprotected.
Thisscenarioexplainshowtoconnectaashingbeaconandsetituptoashwheneverthethermalcameradetectsanintrusion.In
thisscenariothebeaconcanonlybeactivatedtoashduetoalarmsoutsideofcehours,between18.00and08.00Monday-Friday,
anditshouldashfor30secondseachtimeitisactivated.
Requiredhardware
•Multicable,seeMulticonnectoronpage15
•Connectingwires(oneblueandonered,minarea:0.25mm
2
,maxarea:0.5mm
2
)
•Flashingbeacon(12VDC,max50mA)
Note
Themaximumlengthoftheconnectingwiresdependsonthewireareaandthepowerconsumptionofthebeacon.
Physicalconnection
1.Connectthemulticabletothecamera.
2.Connecttheredwiretopin2(DCoutput,+12VDC)ofthemulticableI/Oterminalconnector.
7
AXISQ19Series
Setup
3.Connecttheotherendoftheredwiretotheconnectormarkedwith+ontheashingbeacon.
4.Connectthebluewiretopin3(I/Oport)ofthemulticableI/Oterminalconnector.
5.Connecttheotherendofthebluewiretotheconnectormarkedwith-ontheashingbeacon.
CongureI/Oports
Youneedtoconnecttheashingbeacontothecamerainthecamera’swebpage.TherstpartofthisistoconguretheI/Oports:
1.GotoSystem>I/Oports.
2.SelectOutputinthePort1drop-downlist.
3.Givetheoutputmoduleadescriptivename,forexample“Flashingbeacon”.
4.Tomakethebeaconstartashingwheneveraneventistriggered,selectOpencircuitinthe
drop-downlist.
Createanactionrule
Forthecameratosendanoticationtothebeacontostartashingwhensomethingisdetected,youneedtocreateanaction
ruleinthecamera:
1.GotoSystem>Events>Actionrules.
2.ClickAdd.
3.SelectEnableruleandgivetheactionruleaname,forexample“Flashingbeacon”.
4.SelectApplicationsfromtheTriggerdrop-downlist.
5.Selecttheperimeterprotectionapplicationfromthedrop-downlist.
6.SettheScheduletoAfterhours.
7.SelectOutputportfromtheTypedrop-downlist.
8.Select“Flashingbeacon”fromthePortdrop-downlist.
9.Setthedurationto30seconds.
10.ClickOk.
Howtoconnectanetworkhornspeaker
Useanetworkhornspeakertowarnanddeterpossibleintruders.
ThisscenarioexplainshowtoconnectanAxisnetworkhornspeakertothecameraandsetituptoplayanaudioclipwheneverthe
thermalcameradetectsanintrusion.Inthisscenario,thehornspeakercanonlybeactivatedduetoalarmscomingoutsideofce
hours,between18.00and08.00Monday-Friday.
Setuprecipient
8
AXISQ19Series
Setup
Note
Anaudioclipmustbeavailableinthehornspeakerandyouneedtoknowthenumberoftheaudioclip.Tondoutthe
numberoftheaudioclip,typethefollowingcommand:http://[HornSpeakerIP]/axis-cgi/param.cgi?action=list,where
[HornSpeakerIP]istheIPaddressofthehornspeaker.YoundthenumberaftertheletterMinthelistdisplayed.
Connectthecameratothehornspeakerbysettingitupasarecipientinthecamera:
1.GotoSettings>System>Events>Recipients.
2.ClickAdd.
3.Givetherecipientaname,forexample“Hornspeaker”.
4.SelectHTTPfromtheTypedrop-downlist.
5.Enterhttp://[HornSpeakerIP]/axis-cgi/playclip.cgi?clip=[x]intheurleld,where[HornSpeakerIP]istheIPaddressofthe
hornspeakerand[x]istheaudioclipnumber.
6.EntertheusernameandpasswordofthehornspeakerunderLoginCredentials.
7.ClickOK.
Createanactionrule
Forthecameratosendanoticationtothehornspeakertoplaytheaudioclipwhensomethingisdetected,createanaction
ruleinthecamera:
1.GotoSettings>System>Events>Actionrules.
2.ClickAdd.
3.Givetheactionruleaname,forexample“Hornspeaker”.
4.Fromthelistoftriggers,selectApplicationsandthenselecttheperimeterprotectionapplication.
5.SettheScheduletoAfterhours.
6.Fromthelistofactions,selectSendnoticationandthenselectHornspeaker.
7.ClickOK.
Howtoreducebandwidthandstorage
Important
Ifyoureducethebandwidthitcanresultinlossofdetailsinthepicture.
1.GotoliveviewandselectH.264.
2.GotoSettings>Stream.
3.Dooneormoreofthefollowing:
-TurnontheZipstreamfunctionalityandselectthedesiredlevel.
-TurnondynamicGOPandsetahighGOPlengthvalue.
-Increasethecompression.
-TurnondynamicFPS.
9
AXISQ19Series
Dailyuse
Dailyuse
Aboutcolorpalettes
Colorpalettesappliedtothermalimageshelpthehumaneyedistinguishimagedetails.Thecolorsinthepalettearearticially
createdpseudocolorsthatemphasizetemperaturedifferences.
Colorpaletterecommendation
Theproducthasseveralcolorpalettestochoosefrom.Ifanoperatorwatchesthevideostream,chooseanyofthepalettes.Ifthe
videostreamisonlyusedbyapplications,selectthewhite-hotpalette.
HowtostabilizeashakyimagewithElectronicImageStabilization(EIS)
10
AXISQ19Series
Troubleshooting
Troubleshooting
Howtoresettofactorydefaultsettings
Important
Resettofactorydefaultshouldbeusedwithcaution.Aresettofactorydefaultresetsallsettings,includingtheIPaddress,to
thefactorydefaultvalues.
Toresettheproducttothefactorydefaultsettings:
1.Disconnectpowerfromtheproduct.
2.Pressandholdthecontrolbuttonwhilereconnectingpower.SeeProductoverview.
3.Keepthecontrolbuttonpressedfor15–30secondsuntilthestatusLEDindicatorashesamber.
4.Releasethecontrolbutton.TheprocessiscompletewhenthestatusLEDindicatorturnsgreen.Theproducthasbeenreset
tothefactorydefaultsettings.IfnoDHCPserverisavailableonthenetwork,thedefaultIPaddressis192.168.0.90
5.UsetheinstallationandmanagementsoftwaretoolstoassignanIPaddress,setthepassword,andaccessthevideostream.
Theinstallationandmanagementsoftwaretoolsareavailablefromthesupportpagesonaxis.com/support
Itisalsopossibletoresetparameterstofactorydefaultviathewebinterface.GotoSettings>System>Maintenanceand
clickDefault.
Howtocheckthecurrentrmware
Firmwareisthesoftwarethatdeterminesthefunctionalityofnetworkdevices.Oneofyourrstactionswhentroubleshootinga
problemshouldbetocheckthecurrentrmwareversion.Thelatestversionmaycontainacorrectionthatxesyourparticular
problem.
Tocheckthecurrentrmware:
1.Gototheproduct’swebpage.
2.Clickonthehelpmenu.
3.ClickAbout.
Howtoupgradethermware
Important
Preconguredandcustomizedsettingsaresavedwhenthermwareisupgraded(providedthatthefeaturesareavailablein
thenewrmware)althoughthisisnotguaranteedbyAxisCommunicationsAB.
Important
Makesuretheproductremainsconnectedtothepowersourcethroughouttheupgradeprocess.
Note
Whenyouupgradetheproductwiththelatestrmware,theproductreceivesthelatestfunctionalityavailable.Alwaysread
theupgradeinstructionsandreleasenotesavailablewitheachnewreleasebeforeupgradingthermware.Tondthelatest
rmwareandthereleasenotes,gotoaxis.com/support/rmware
1.Downloadthelatestrmwareletoyourcomputer,availablefreeofchargeataxis.com/support/rmware
11
AXISQ19Series
Troubleshooting
2.Logintotheproductasanadministrator.
3.GotoSettings>System>Maintenanceintheproduct’swebpageandfollowtheinstructions.Whentheupgradehas
nished,theproductrestartsautomatically.
AXISCameraManagementcanbeusedformultipleupgrades.Findoutmoreataxis.com/products/axis-camera-management
Technicalissues,cluesandsolutions
Ifyoucan’tndwhatyou’relookingforhere,trythetroubleshootingsectionataxis.com/support
Problemsupgradingthermware
FirmwareupgradefailureIfthermwareupgradefails,theproductreloadsthepreviousrmware.Themostcommonreason
isthatthewrongrmwarelehasbeenuploaded.Checkthatthenameofthermwarele
correspondstoyourproductandtryagain.
ProblemssettingtheIPaddress
Theproductislocatedona
differentsubnet
IftheIPaddressintendedfortheproductandtheIPaddressofthecomputerusedtoaccessthe
productarelocatedondifferentsubnets,youcannotsettheIPaddress.Contactyournetwork
administratortoobtainanIPaddress.
TheIPaddressisbeingused
byanotherdevice
DisconnecttheAxisproductfromthenetwork.Runthepingcommand(inaCommand/DOS
window,typepingandtheIPaddressoftheproduct):
•Ifyoureceive:Replyfrom<IPaddress>:bytes=32;time=10...
thismeansthattheIPaddressmayalreadybeinusebyanotherdeviceonthenetwork.
ObtainanewIPaddressfromthenetworkadministratorandreinstalltheproduct.
•Ifyoureceive:Requesttimedout,thismeansthattheIPaddressisavailable
forusewiththeAxisproduct.Checkallcablingandreinstalltheproduct.
PossibleIPaddressconict
withanotherdeviceonthe
samesubnet
ThestaticIPaddressintheAxisproductisusedbeforetheDHCPserversetsadynamicaddress.
ThismeansthatifthesamedefaultstaticIPaddressisalsousedbyanotherdevice,theremay
beproblemsaccessingtheproduct.
Theproductcannotbeaccessedfromabrowser
Cannotlogin
WhenHTTPSisenabled,ensurethatthecorrectprotocol(HTTPorHTTPS)isusedwhenattempting
tologin.Youmayneedtomanuallytypehttporhttpsinthebrowser’saddresseld.
Ifthepasswordfortheuserrootislost,theproductmustberesettothefactorydefaultsettings.
SeeHowtoresettofactorydefaultsettings.
TheIPaddresshasbeen
changedbyDHCP
IPaddressesobtainedfromaDHCPserveraredynamicandmaychange.IftheIPaddresshas
beenchanged,useAXISIPUtilityorAXISCameraManagementtolocatetheproductonthe
network.Identifytheproductusingitsmodelorserialnumber,orbytheDNSname(ifthename
hasbeencongured).
Ifrequired,astaticIPaddresscanbeassignedmanually.Forinstructions,gotoaxis.com/support.
Certicateerrorwhenusing
IEEE802.1X
Forauthenticationtoworkproperly,thedateandtimesettingsintheAxisproductmustbe
synchronizedwithanNTPserver.GotoSettings>System>Dateandtime
Theproductisaccessiblelocallybutnotexternally
Routerconguration
CheckthatyourrouterallowsincomingdatatrafctotheAxisproduct.Theroutermustsupport
UPnP
®
.
Firewallprotection
ChecktheInternetrewallwithyournetworkadministrator.
12
AXISQ19Series
Troubleshooting
Problemswithstreaming
MulticastH.264only
accessiblebylocalclients
Checkifyourroutersupportsmulticasting,oriftheroutersettingsbetweentheclientandthe
productneedtobecongured.TheTTL(TimeToLive)valuemayneedtobeincreased.
NomulticastH.264
displayedintheclient
CheckwithyournetworkadministratorthatthemulticastaddressesusedbytheAxisproduct
arevalidforyournetwork.
Checkwithyournetworkadministratortoseeifthereisarewallpreventingviewing.
PoorrenderingofH.264
images
Ensurethatyourgraphicscardisusingthelatestdriver.Thelatestdriverscanusuallybe
downloadedfromthemanufacturer’swebsite.
Lowerframeratethan
expected
•SeePerformanceconsiderationsonpage13.
•Reducethenumberofapplicationsrunningontheclientcomputer.
•Limitthenumberofsimultaneousviewers.
•Checkwiththenetworkadministratorthatthereisenoughbandwidthavailable.
•Lowertheimageresolution.
•Themaximumframespersecondisdependentontheutilityfrequency(60/50Hz)of
theAxisproduct.
Performanceconsiderations
Whensettingupyoursystem,itisimportanttoconsiderhowvarioussettingsandsituationsaffecttheperformance.Somefactors
affecttheamountofbandwidth(thebitrate)required,otherscanaffecttheframerate,andsomeaffectboth.Iftheloadonthe
CPUreachesitsmaximum,thisalsoaffectstheframerate.
Thefollowingfactorsarethemostimportanttoconsider:
•Highimageresolutionorlowercompressionlevelsresultinimagescontainingmoredatawhichinturnaffectsthe
bandwidth.
•AccessbylargenumbersofMotionJPEGorunicastH.264clientsaffectsthebandwidth.
•Simultaneousviewingofdifferentstreams(resolution,compression)bydifferentclientsaffectsbothframerateand
bandwidth.
Useidenticalstreamswhereverpossibletomaintainahighframerate.Streamprolescanbeusedtoensurethat
streamsareidentical.
•AccessingMotionJPEGandH.264videostreamssimultaneouslyaffectsbothframerateandbandwidth.
•Heavyusageofeventsettingsaffectstheproduct’sCPUloadwhichinturnaffectstheframerate.
•UsingHTTPSmayreduceframerate,inparticularifstreamingMotionJPEG.
•Heavynetworkutilizationduetopoorinfrastructureaffectsthebandwidth.
•Viewingonpoorlyperformingclientcomputerslowersperceivedperformanceandaffectsframerate.
•RunningmultipleAXISCameraApplicationPlatform(ACAP)applicationssimultaneouslymayaffecttheframerateand
thegeneralperformance.
•Usingpalettesaffectstheproduct’sCPUloadwhichinturnaffectstheframerate.
13
AXISQ19Series
Specifications
Specifications
Tondthelatestversionoftheproduct’sdatasheet,gototheproductpageonaxis.comandlocateSupport&Documentation.
Productoverview
1
Powerconnector
2
I/Oandaudioterminalconnector(multi-connector)
3
Networkconnector
4
StatusindicatorLED
5
MicroSDmemorycardslot
6
Controlbutton
7
Foot
8
Mountingbracket
LEDIndicators
StatusLED
Indication
Unlit
Connectionandnormaloperation.
GreenConnectionandnormaloperation.
Amber
Steadyduringstartup.Flashesduringrmwareupgradeorresettofactorydefault.
Amber/RedFlashesamber/redifnetworkconnectionisunavailableorlost.
RedFirmwareupgradefailure.
14
AXISQ19Series
Specifications
SDcardslot
NO NO
NO
TICE TICE
TICE
•RiskofdamagetoSDcard.Donotusesharptools,metalobjects,orexcessiveforcewheninsertingorremovingthe
SDcard.Useyourngerstoinsertandremovethecard.
•Riskofdatalossandcorruptedrecordings.DonotremovetheSDcardwhiletheproductisrunning.UnmounttheSDcard
fromtheproduct’swebpagebeforeremoval.
ThisproductsupportsmicroSD/microSDHC/microSDXCcards(notincluded).
ForSDcardrecommendations,seeaxis.com
Buttons
Controlbutton
Forlocationofthecontrolbutton,seeProductoverviewonpage14.
Thecontrolbuttonisusedfor:
•Resettingtheproducttofactorydefaultsettings.Seepage1 1.
•ConnectingtoanAXISVideoHostingSystemservice.See.Toconnect,pressandholdthebuttonforabout3seconds
untiltheStatusLEDashesgreen.
•ConnectingtoAXISInternetDynamicDNSService.See.Toconnect,pressandholdthebuttonforabout3seconds.
Connectors
Powerconnector
TerminalconnectorforconnectingAC/DCpowersupply.
Networkconnector
RJ45EthernetconnectorwithPoweroverEthernet(PoE).
Multiconnector
Terminalconnectorforconnectingexternalequipment:
•Audioequipment
•Input/Output(I/O)devices
•DCpowersupply
Whenconnectingexternalequipment,aseparatelysoldAxismulticableisrequiredinordertomaintaintheproduct’sIPrating.
Formoreinformation,seeMulticableconnectorsonpage16.
15
AXISQ19Series
Specifications
Multicableconnectors
Multicableoverview
1
Camerapowerconnector
2
Cameramulticonnector
3
Powerconnector
4
I/Oterminalconnector
5
Audioin(pink)
6
Audioout(green)
Themulticableprovidesthefollowingconnectors:
Powerconnector-2-pinterminalblockusedforpowerinput.Thepolarityofthecablesdoesnotmatter.UseaSafetyExtra
LowVoltage(SELV)compliantlimitedpowersource(LPS)witheitheraratedoutputpowerlimitedto≤100Woraratedoutput
currentlimitedto≤5A.
Audioin(pink)-3.5mminputforamonomicrophone,oraline-inmonosignal(leftchannelisusedfromastereosignal).
Audioout(green)-3.5mmoutputforaudio(linelevel)thatcanbeconnectedtoapublicaddress(PA)systemoranactivespeaker
withabuilt-inamplier.Astereoconnectormustbeusedfortheaudioout.
I/Oterminalconnector-Usewithexternaldevicesincombinationwith,forexample,tamperingalarms,motiondetection,event
triggering,andalarmnotications.Inadditiontothe0VDCreferencepointandpower(DCoutput),theI/Oconnectorprovidesthe
interfaceto:
•Digitaloutput—ForconnectingexternaldevicessuchasrelaysandLEDs.Connecteddevicescanbeactivatedby
theVAPIX®ApplicationProgrammingInterfaceorintheproduct’swebpage.
•Digitalinput—Forconnectingexternaldevicesthatcantogglebetweenanopenandclosedcircuit,forexample
PIRdetectors,door/windowcontacts,andglassbreakdetectors.
16
AXISQ19Series
Specifications
FunctionPinNotes
Specications
0VDC(-)
1
0VDC
DCoutput
2
Canbeusedtopowerauxiliaryequipment.
Note:Thispincanonlybeusedaspowerout.
12VDC
Maxload=50mA
Digitalinput–Connecttopin1toactivate,orleave
oating(unconnected)todeactivate.
0tomax30VDC
Congurable(Input
orOutput)
3–4
Digitaloutput–Connecttopin1toactivate,orleave
oating(unconnected)todeactivate.Ifusedwithan
inductiveload,e.g.arelay,adiodemustbeconnected
inparallelwiththeload,forprotectionagainstvoltage
transients.
0tomax30VDC,open
drain,100mA
1
0VDC(-)
2
DCoutput12V,max50mA
A
I/Oconguredasinput
B
I/Oconguredasoutput
17
UserManualVer.M5.1
AXISQ19SeriesDate:October2017
©AxisCommunicationsAB,2015-2017
PartNo.1741422
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Axis Q1941-E User manual

Q1941-E
Axis
Brand
Axis
Model
Q1941-E
Type
User manual
This manual is also suitable for

Axis Q1941-E is a high-performance thermal network camera designed for perimeter protection and intrusion detection. It features excellent image quality, advanced analytics, and a rugged design. With its built-in AXIS Perimeter Defender application, it can accurately detect and track intruders, even in challenging conditions like complete darkness, fog, and smoke. The camera's thermal imaging technology allows it to see through these obscurants, providing 24/7 surveillance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers