Elinz DCREAR5NTK is a high-performance camera that combines wide dynamic digital industry-leading camera technology with a variety of features to enhance your recording experience. With its 12MP HD pixel and 170-degree wide-angle lens, you can capture stunning videos and photos with ease. The device offers multiple recording resolutions, including 1080P and 720P, allowing you to choose the best quality for your needs. Additionally, the loop recording function ensures continuous recording by overwriting older files when the memory card is full.
Elinz DCREAR5NTK is a high-performance camera that combines wide dynamic digital industry-leading camera technology with a variety of features to enhance your recording experience. With its 12MP HD pixel and 170-degree wide-angle lens, you can capture stunning videos and photos with ease. The device offers multiple recording resolutions, including 1080P and 720P, allowing you to choose the best quality for your needs. Additionally, the loop recording function ensures continuous recording by overwriting older files when the memory card is full.
DCREAR5NTK USER Manual
MANUAL
This product uses a high performance chip, provides the high definition
video, dynamic images seamless, gravity sensing and other functions.
This product combines wide dynamic digital industry leading
camera, no leakage of seconds, seamless circular camera, ultra- wide
angle shooting, with display real-time playback, mobile detection
camera, parking guard technology in one, streamline design of unique
fashion, favored by the vast number of consumers.
I: The appearance and keys functions description
Menu key:
Press OK to pause the video recording, by pressing Menu button for a
short time to pop up the different functions of menu, such
as ”resolution”, ”Dual record” ”Loop recording” etc. using the Up and
Down arrow
Mode key:
Press OK to pause the video recording, short press the Mode key, the
camera photograph/playback/video can be switched with each other. In
camera mode, press OK to take photo. In playback mode, short press
Menu to delete or protect the file, press UP and Down to select the video/
photo for playback, short press OK to playback video. In video mode,
press OK to start recording.
Power Switch key:
Long press made the power on/off, short press to turn the screen on/off
Up key:
Press OK to pause the video recording, press the up key to switch the
front, rear and double lens preview mode, switching front lens preview,
the screen will display “A” lens mode; switch rear lens preview, at the top
of the screen will shows “B” lens mode, And display the “AB” lens mode
at the top of the screen by switching double lens, Menu settings or other
settings function is the bottom-up selection keys.
Down key:
In a state dual camera mode. After a short period press, front or rear lens
mode can be displayed and switched. Menu settings or other set
functions are the down selection function keys.
TF card slot:
TF card pin in down into the product card slot
Reset button: Pressing the rest button can reset the boot under any
circumstance.
Three: Menu function description
Resolution: is set for the video/camera quality of the product. Video
mode has two specifications that can be set:
Video mode can be selected between 1080FHD 1920x1080, 720P
1280x720, WVGA 848 x 480, VGA 640x 480
Camera mode can be selected between 12M 4032x3024, 10M
3648x2736, 8M 3264x 2448, 5M 2592x1944, 3M 2048x1536, 2MHD
1920x1080, VGA 640x480, 1.2M 1280x960
Loop recording Video length: Loop recording can be set for each video
length. There are 3 minutes, 5minutes, 10minutes.
Video mode：In this state , It can be set the video camera mode of the
menu function Front. Rear and double lens working mode can be used to
record for on alternative approach, Single record products does not
support the recording mode and the installation of the rear lenses.
Settings:
The product menu function has many specifications which includes white
balance , exposure time, watermark, frequency, sound recording, screen
saver settings, set the date-format, restore factory setting, software
version, it’s all operating according to the corresponding sets.
1) White balance:
• White balance mix of red green and blue generate colors, White
display in different light effects is different, there are automatic
sunny, fluorescent, cloudy-incandescent light for your selection.
2) Exposure degree:
• The intensity of the image, the greater the exposure the more
lighters will be, There are-3,-2,-1, 0, 1, 2, 3 to be chosen.
3) Time water marking:
• The time of watermark is the time which displayed in the video
while recording or taking pictures. If the video plan back mode is
opening, it will update the time automatically. There are “open
closed” options, when you open the video or photos to see the
recording or taking pictures of time. Otherwise, closing it
doesn’t show time.
4) Parking Monitor:
When you open the parking monitoring in the off state, if the car has
a slight vibration, the recorder will automatically start recording. Turn
off at this time if it is in the state will be recorded in 20 seconds and
then shut down (time can be set for automatic shutdown).
• [Note] This feature requires hardware support
5) Boot video:
• Boot video could be described as the car supply the power
starting, it will starting-up automatically and enter the video state,
Manual operation is not required. There are “open” ”closed”
features for your selection
6) Language selection:
• There are six languages for you to choose from, which contains
“Chinese simplified’ ”Chinese traditional” ”English” ”Russian”
“Japanese” “Koran”，you can select the corresponding Language
according to your request.
7) Frequency:
• The frequency option is mainly for the different countries of the
light source frequently. There is a difference in some ways, such
as the Chinese source light frequency is 50Hz. However, the
South Korea source light frequency is 60Hz. Frequency
difference will impact on video, there are “50Hz” “60Hz” optional.
8) Record audio:
• Turning on/off Record audio will turn sound recording on/off
• Press the [OK] key, the recorder automatically starts. Video
recording indicator lights up and blinks. To turn off audio
recording while the video is recording, press [Down] for 3
seconds, the recorder will automatically save the record again
and shut down audio recording.
9) Screen saver settings: Functions of screen saver settings is
achieved in the absence of any key operation. Screen saver mode can
be set under Menu> Backlight, you can choose the screen to turn off after
1 minute or 3 minutes. Choose “Off” under backlight, if you do not want
the screen to turn off.
10.) G-sensor function
The unit features an impact sensor (G-sensor). If a serious vehicle
collision, the recorder will lock the first 10 seconds, and 20 seconds
after the accident occurred and save it as a special image, the
monitor will display a lock icon in the lower left. Locked images will
not be overwritten.【prompt】
a. Lock the video file name at the beginning of ZW, general log files
beginning with AW.
b. G sensor can be turned on under Menu [G-sensor], you can
select the desired G sensor sensitivity High, Medium, Low or Off,
according to the actual need. The higher the sensitivity, the more
videos will be locked and will not be erased during loop recording,
therefore, we suggest you to select Medium sensitivity.
Alternatively, Press Mode while the video is recording to lock the
files.
11.) Date and Time setting:
Press OK to pause video recording, short press [Menu] key to enter the
system setup menu, press the down arrow key [Up] / [Down] keys to
move the cursor to set the Date/ Time options. Press [OK] to enter the
menu settings
12.) Format: This option is available to the users for removing all the
stored video clips and photos. The dialog box will pops up while
operating. Select ’OK’ to delete all data in the sd ; Select ‘ Cancel’, will
not do any operation.
13.) Default setting: This function allows the operator to reset all settings
to factory settings. When the options pop up dialog box, select ‘OK’ to
return to the factory reset; select ‘Cancel’ to cancel the operation.
14.) Software version: This function can provide the information about
the release of the software for users.
REMINDER: Due to the update of the software version leads to the
differences of the software version leads to the differences of the
functions. Please make the object as the standard. Some software
settings will be different depending on the single version of the machine.
The criteria for the objects are based on the standard of single machine
function.
Four: Basic operations about camera /photo/file playback.
1. Power key
Function 1：Switch function
1. In the off state, press the power button and hold for 3 seconds
for the machine to start working automatically.
2. In the off state, press the power button and hold for 3 seconds,
the unit automatically keeps video files and user settings switch.
2.Videography mode
The upper left corner of the screen will display the camera icon when
enter the video preview mode short press ‘OK’ can achieve the video
function. There will be a flash at this moment. There is a change to
open mobile detection with the camera icon not the other way.
3.Photo made
After a short time of pressing MODE button to switch the camera mode.
To the upper part of the screen will display the camera icon, Pressing ‘OK’
button to take pictures. Meanwhile it will make a ’click’ sound, which said
the photos have been completed
4.Video/Photo playback
To press MODE for a brief time to switch playback mode, the upper left
corner of the screen will display the playback icon. Pressing ‘UP’ or
‘DOWN’ key can be up or down to select the file .Screen of the video file
resources will display video playback iron TO press ‘OK’ is play/pause
video function. When it came that there is no display, playback icon
refers to the picture format.
REMARKS: Because of the operation error, users can make use of a
small hard object to press “Reset” button and then it will be restart, the
machine can be returned to be normally.
FIVE: Product parameters
NOTE:
Specifications of the parameters may be due to some reasons will make
changes, Like upgrades .updates and so on. Please make the object as
the standard.
1.Please use only the specified adapter, using unqualified adapter will do
harm to products and even burn products.
2. Please do not use this product in a wet or high temperature
environment.
3.Please keep the lens clean, In order to avoid affect the image effect.
4.In order to protect your legitimate right and interests, please do not
disassemble right the product by yourself.
5.Please abide by the laws of the state strictly, shall not be used for illegal
purposes or else.
LSD screen size
5” HD display
Camera
12MP HD pixel and 170 degree wide angle lens
Video resolution
1920*1080P~30fps 1280*720P~30fps
Photo resolution
1M ~ 12M
Picture format
JPG
Type of storage card
TF card
Storage card capacity
Maximum support 32G
TV-IN port
TV-IN 3.5mm
USB port
USB2.0 5P
Frequency
50HZ/60HZ
Battery
3.7V Pdymer Litlcium battery
MICS/Speaker
Support
Language
Chinese、English、Russian，Japanese，Korean
Installation Guide
1. Turn off your vehicle engine.
2. Insert the TF card into the recorder slot.
[Note] Please use the high-speed TF card (Class10 above),
capacity of not less than 8G. TF card can support up to 32GB.
3. The recorder is fixed to the rearview mirror of the car.
4. Insert the car charger into the car cigarette lighter.
5. Extension cable charging the recorder's USB connector and car
charger is connected.
[Note] Reduces charging extension cord wiring can be laid along the
edge of the windshield.
6. The rear camera is installed in the rear of the vehicle. Pay
attention to the direction of installation. Wiring can be laid along the
vehicle roof. After the installation is complete you will plug into the
recorder rear camera interface.
7. Adjust the lens position to ensure that the lens levels with the
ground.
8. Start the engine and check if the machine has been installed
correctly.
9. For Best Result in using Dash Camera, we definitely recommend
to keep it plug-in into the car cigarette charger. This will allow you to
use or record for a longer period of time. Dash Camera uses a lot of
battery due to G Sensor system of the camera.
10. To watch recorded video clips, please remove SD card from Dash
Camera and connect it to your computer or laptop. This will allow you
to watch all videos recorded.
11. Please peel off the protective film on the screen before use.
[Note] When the machine is properly installed, the system indicator lights
will work; the machine starts to enter the recording state and the
recording indicator light flashes. Remember to check if the display screen
is normal.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Elinz DCREAR5NTK is a high-performance camera that combines wide dynamic digital industry-leading camera technology with a variety of features to enhance your recording experience. With its 12MP HD pixel and 170-degree wide-angle lens, you can capture stunning videos and photos with ease. The device offers multiple recording resolutions, including 1080P and 720P, allowing you to choose the best quality for your needs. Additionally, the loop recording function ensures continuous recording by overwriting older files when the memory card is full.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Pyle PLCMDVR46 User manual
-
AZDOME GS63H User manual
-
RTMOK 1080P Dash Camera Front and Rear 4’’ IPS Screen Dual Dashboard Camera Recorder for Cars User manual
-
Sungale LD353 User manual
-
Pyle PLCMDVR49 User manual
-
j Junsun 13 User manual
-
REXING SG_B071LPV7G6_US User manual
-
Amigo DC710 User manual
-
REXING V1 User manual
-
