2. Autopot
  3. AQUAplate Circle

Autopot AQUAplate Circle Operating instructions

  • Hello! I have reviewed the user manual for the AutoPot AQUAplate Circle kit. This document outlines the setup and use of the system for growing plants without soil, using direct access to nutrient-rich water. It includes instructions for assembling the components, managing water temperature, and nutrient levels. I am ready to answer any questions you have about the system.
  • What is the recommended water temperature?
    What is the recommended starting nutrient dose?
    Can Airstone improve growth?
Circle Kit
•Grow free from substrate
•Direct root access to
nutrient rich water
Includes a PotSock Round
for superior root control
www.autopot-usa.com
Strong, healthy
plants on a plate!
Kit Contents:
1x AQUAplate Circle
1x PotSock Round
5x Mesh Pots
5x Neoprene Collars
5x Foam Discs
8 18997 01046 5
•Adapt your AutoPot
Watering System for
aero/hydroponic growing
Slot your plant into the black
neoprene collar.
Fit black neoprene collar
into mesh pot.
Rooted plant plugs
may also be used
Place the mesh pot
in the AQUAplate
Assemble and connect your
reservoir, tray and AQUAvalve
(supplied separately).
Fill your reservoir
(supplied separately).
Do not switch on.
Seat blue foam pad
in the base of the mesh pot
Turn on your system
Place the AQUAplate
in your tray
Position tray so it is level.
Insert PotSock, gold face up
1 2 3
65a4
5b
987
AQUAplate Circle set up Instructions
We recommend a target water
temperature of 64-68°F / 18-20°C
Plants grown without substrate need
lower doses of nutrient. Start at half
strength and gradually increase.
Add an Airstone to the tray for even
greater growth acceleration!
Tip 3Tip 2Tip 1
/