Symmons 0195-2W, 0195-2W-1.5 Installation guide

  • Hello! I have reviewed the Installation Guide for the Hand Shower DS Creations 0195-2W. This document covers the installation, specifications and features of the hand shower, including its 2.0 gpm flow restrictor, plastic construction with polished chrome finish, compliance to standards, and warranty information. I am ready to answer any questions you have about this product.
  • What is the flow rate of the standard hand shower?
    What material is the hand shower made of?
    What is the warranty for residential use?
DS Creations
0195-2W (CD0195-2W)
Square Hand Shower
Installation Guide
Dimensions
Measurements
A 9-11/16", 246 mm
B G 1/2"
C 3-3/16", 81 mm
D 3-7/8", 98 mm
E 1-3/16", 30 mm
Note: Dimensions subject to change without notice.
AA
BB
DD
CC
EE
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
0195-2W
Square Hand Shower
Square Hand Shower shall include 2.0 gpm (7.6 L/min) ow
restrictor. Square Hand Shower shall be made from plastic
construction, plated in standard polished chrome nish.
Modifications
-1.5 1.5 gpm (5.7 L/min) ow restrictor
Note: Append appropriate -sufx to model number.
Compliance
-ASME A112.18.1/CSA B125.1
-WaterSense @ 1.5 gpm & 2.0 gpm
Certied by
CSA Group
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800) 796-6667 Fax: (800) 961-9621
Copyright © 2018 Symmons Industries, Inc. symmons.com [email protected] ZV-2517 REV C 061918
Parts Breakdown
Tools Required for Installation
Adjustable Wrench
Plumber Tape
Note: Apply plumber tape to threaded connection.
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
/