Instruction
Please read this manual carefully to ensure proper handling of the equipment.
Torque Multiplier 1"
EN
Art. 30213
2
PRODUCT BRIEF
This Torque Multiplier is used for easy opening of nuts and bolts. It may be ideal in vehicle operation for trucks,
buses, construction and agricultural machinery. Due to the compact and lightweight construction, this tool kit can
be stowed away in the vehicle.Thanks to the Planetary gear with a ratio of 1:58 to reach a force of up to 4000 Nm.
thereby be even high-strength or rusted wheel easily solved.
CONTENTS AND SPECIFICATIONS
• 1 Torque Multiplier 1"
• 1 handle
• 1 extension 270 mm (Not suitable for use with impact tools! Strong shocks through the use of impact tools can
damage the tool). The extension is only together with the crank handle for fast screws used after the screw has
been solved.
• 7 Sockets: 24-27-30-32-33-36-38 mm
• 1 adaptor: 1" to 3/4"
• 1 carrying case
Maximum torque: 4000 Nm
Ratio: 1:58
3
Pic.2Pic.1
Pic.4Pic.3
APPLICATION
1. Insert the appropriate socket on the 1" drive. (Pic.1)
2. Select a convenient stop. (Pic.2)
3. Attach the handle to the opposite end of the tool and turn the crank to loosen the screw. (Pic. 3)
4. After unlocking of the nut to remove the device. It is then possible to use the extension (Pic. 4) to complete
unscrewing faster.
IMPORTANT INFORMATION
Attention: This product is not a tightening tool. For tightening, it is imperative to use a torque wrench
recommended by the manufacturer. An undesired using of the torque multiplier may damage the nuts and bolts.
The torque multiplier should be used only by hand. Do not attempt to use it by attaching it to a pneumatic or electric
operated ratchet or impact wrench. This could seriously damage tools and equipment and bring the user in danger.
The torque multiplier can only be used with the supplied accessories. Using other accessories may damage the
tool, as well as the nuts and bolts, and will cause danger to user.
TOOL USE AND CARE
1. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger
industrial tool. The tool will perform better and more safely at the task for which it was intended. Do not modify
this tool or use for a purpose for which it was not designed.
2. Securely hold this tool using both hands. Using tools with only one hand can result in loss of control.
3. Maintain tools with care. Keep tools clean, and in good condition for a better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool fittings and alignment periodically and, if
damaged, have them repaired by an authorized technician or replaced. The handles must be kept clean, dry and
free from oil and grease at all times. A properly maintained tool reduces the risk of binding and is easier to
control. Applying excessive force can lead to slips and damage to your work or personal injury.
4. Only use the lubricants specified by the manufacturer.
5. When not in use for an extended period, apply a thin coat of lubricant to the steel part to avoid rust.
6. Maintain the label and name plate on the tool. These carry important information. If unreadable or missing,
contact Princess Auto for a replacement.
KRAFTWERK Europe AG
Mettlenbachstrasse 23
CH-8617 Mönchaltorf/Switzerland
Tel. +41-44 949 40 50
KRAFTWERK Sàrl.
25, rue du Stade
F – 67870 Bischoffsheim
Tel. +33-388 46 64 50
www.KRAFTWERKtools.com
IMPORTANT NOTICE
for Torque Multipliers STM0016
Warning
1:58
4000 Nm max.
1
2
1. For proper use of your Torque Multipliers you first need to loosen the nut with the device until reaching the edge
of the bolt.
2. Then you can use the lever with the handle carefully.
/
