Hand Steam Cleaner
8114
instructions
Description
1. Body
2. Spray nozzle
3. Safety cap
4. Steam button
5. Handle
6. Power cord and plug
7. Power indicator
8. Funnel
9. Measuring cup
10.Round brush
11.Angled nozzle
12.Spray nozzle extension
13.Extended connecting spray nozzle
14.Clothing and upholstery cleaner
15.Glass cleaner
16.Towel sleeve
Warning
• Before assembling the Steam Cleaner, unpack all parts can check that none are damaged and that you have all parts listed.
• For household use only.
• Keep away from children.
• Do not immerse power cord or plug in water or other liquids.
• Do NOT use if power cord or plug are damaged.
• Do NOT turn on power supply until the water tank is filled.
• Always secure the safety cap in position before use.
• Only plug into a standard UK socket.
• During use, do NOT tip the machine body at an angle greater than 45 degrees as this may cause boiling water to be released with the steam.
• Before refilling the tank, always unplug the power cord to disconnect power supply.
• Always unplug the power cord after use.
• Do NOT use any additives as this may damage the tank.
• When power supply is turned on the Steam Cleaner immediately begins the heating process
• Once a specified temperature has been reached, steam will be sprayed out when the steam button is pressed.
• Suitable for cleaning doors, windows, floor boards and clothes.
• Do NOT aim spray at people, animals or items likely to be damaged by hot steam.
• Do NOT use on clothing which is not suitable for ironing.
Assembly & Use
• Push down on safety cap and unscrew. (Pics I & II)
• Add 175ml of water and pour into the tank using the measuring cup and funnel.
• Attach the attachment you require.
• The Steam Cleaner will be ready approximately 4 minutes after it is turned on.
• Press on the steam button to activate.
• Once the water tank is empty, switch off at the mains. Carefully open the safety cap (CAUTION - IT MAY
BE HOT SO USE A CLOTH TO PROTECT YOUR FINGERS). Slowly refill using warm water. Ensure the
cleaner is pointing away from you in case it spits!
• Do not overfill the tank as there must be space for steam to develop.
Pic. I Pic. II