2. Baxton Studio
  3. BBT8062-Grey Velvet/Walnut-5PC Dining Nook Set

Baxton Studio BBT8062-Grey Velvet/Walnut-5PC Dining Nook Set, BBT8062-Grey Velvet/Walnut-4PC Dining Nook Set Assembly Instructions

  • Hello, I have reviewed the assembly instructions for the BBT 8062 table. This document provides a detailed guide with step-by-step instructions, parts lists, and cautions for proper assembly. I'm ready to assist you with any questions you might have regarding the assembly process or the components.
  • Should I fully tighten all bolts right away?
    Is it okay to over-tighten the bolts?
    Where should I keep the hardware during assembly?
PART LIST
ITEM DESCRIPTION QTY
A TABLE TOP 1 PC
B LEGS 4 PCS
ASSEMBLY INSTRUCTIONS PART LIST
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 60mm 8 PCS
2 M6 FLAT WASHER 8 PCS
3 M6 SPRING WASHER 8 PCS
4 M4 ALLEN KEY 1 PC
STEP 1
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 2
A
B
2
3
1
4
ASSEMBLY INSTRUCTIONS
MODEL : BBT 8062 - SF
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
STEP 1 STEP 2
1 OF 3
A
LR
BB
B (R)
Take out LEG (A) & (B) from the CUSHION SEAT (D).
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB BOLT M8 x 45mm 8pcs
2 JCBB BOLT M8 x 30mm 8pcs
3 M8 FLAT WASHER 16pcs
4 M8 SPRING WASHER 16pcs
5 WOOD SCREW M4 x 25mm 8 PCS
6 M5ALLEN KEY (BALL SHAPE) 1PC
PART LIST
ITEM DESCRIPTION QTY
A LEG FRONT 2 PCS
B LEG BACK (L/R) 2 PCS
C CUSHION BACK 1 PC
D CUSHION SEAT 1 PC
E ARM 1 PC
B
A
D
ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 3
Don't screw tied
**Finish step 4,
Please screw tied
the step 3 bolt.
D
C
6
1
4
3
C
D
E
1
4
3
6
ASSEMBLY INSTRUCTIONS
STEP 5
3 OF 3
STEP 6
STEP 7
B
B
L
RA
A
3
4
2
6
5
5
BACK FRONT
ASSEMBLY INSTRUCTIONS
MODEL : BBT 8062 - CC
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBB BOLT M8 x 45mm 4pcs
2 JCBB BOLT M8 x 30mm 8pcs
3 M8 FLAT WASHER 12pcs
4 M8 SPRING WASHER 12pcs
5 WOOD SCREW M4 x 25mm 8 PCS
6 M5ALLEN KEY (BALL SHAPE) 1PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
STEP 1 STEP 2
1 OF 3
PART LIST
ITEM DESCRIPTION QTY
A LEG FRONT 2 PCS
B LEG BACK (L/R) 2 PCS
C CUSHION BACK 1 PC
D CUSHION SEAT 1 PC
B
AA
LR
BB
D
Take out LEG (A) & (B) from the CUSHION SEAT (D).
B (R)
ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 3
D
C
D
6
1
4
3
A
A
B
B
L
R
6
2
4
3
BACK FRONT
ASSEMBLY INSTRUCTIONS
STEP 5
3 OF 3
5
5
STEP 6
/