Aruba JH951A Reference guide

HPE FlexFabric 12900E Switch Series

IP Tunneling Command Reference

Software

version: Release 5210

Document version: 6W100-20230424

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard

Enterprise products and services are set forth in the express warranty statements accompanying such

products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett

Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or

copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software

Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s

standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard

Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise

website.

Acknowledgments

Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the

United States and other countries.

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.

Java and Oracle are registered trademarks of Oracle and/or its affiliates.

UNIX® is a registered trademark of The Open Group.

i

Contents

GRE commands ···························································································· 1

keepalive ···················································································································································· 1

IPsec commands ··························································································· 2

ah authentication-algorithm ························································································································ 2

description ·················································································································································· 3

display ipsec { ipv6-policy | policy } ············································································································ 3

display ipsec { ipv6-policy-template | policy-template } ·············································································· 9

display ipsec profile ·································································································································· 11

display ipsec sa ········································································································································ 13

display ipsec sdwan-sa local ···················································································································· 18

display ipsec sdwan-sa remote ················································································································ 22

display ipsec sdwan-statistics ·················································································································· 24

display ipsec sdwan-tunnel ······················································································································ 26

display ipsec statistics ······························································································································ 29

display ipsec transform-set ······················································································································ 31

display ipsec tunnel ·································································································································· 32

encapsulation-mode ································································································································· 35

esn enable ················································································································································ 36

esp authentication-algorithm ···················································································································· 36

esp encryption-algorithm ·························································································································· 37

ike-profile ·················································································································································· 39

ikev2-profile ·············································································································································· 40

ipsec { ipv6-policy | policy } ······················································································································ 41

ipsec { ipv6-policy | policy } isakmp template ··························································································· 42

ipsec { ipv6-policy | policy } local-address ································································································ 43

ipsec { ipv6-policy-template | policy-template } ························································································ 44

ipsec anti-replay check ····························································································································· 45

ipsec anti-replay window ·························································································································· 46

ipsec apply ··············································································································································· 46

ipsec decrypt-check enable ······················································································································ 47

ipsec df-bit ················································································································································ 48

ipsec fragmentation ·································································································································· 48

ipsec global-df-bit ····································································································································· 49

ipsec limit max-tunnel ······························································································································· 50

ipsec logging negotiation enable ·············································································································· 51

ipsec logging packet enable ····················································································································· 51

ipsec profile ·············································································································································· 52

ipsec redundancy enable ························································································································· 53

ipsec sa global-duration ··························································································································· 54

ipsec sa global-soft-duration buffer ·········································································································· 54

ipsec sa idle-time ····································································································································· 56

ipsec transform-set ··································································································································· 56

local-address ············································································································································ 57

pfs ···························································································································································· 58

policy enable ············································································································································ 59

protocol ···················································································································································· 59

qos pre-classify ········································································································································ 60

redundancy replay-interval ······················································································································· 61

remote-address ········································································································································ 62

reset ipsec sa ··········································································································································· 63

reset ipsec sdwan-sa ······························································································································· 64

reset ipsec sdwan-statistics ····················································································································· 65

reset ipsec sdwan-tunnel ························································································································· 65

reset ipsec statistics ································································································································· 66

responder-only enable ····························································································································· 66

reverse-route dynamic ····························································································································· 67

ii

reverse-route preference ·························································································································· 69

reverse-route tag ······································································································································ 69

sa df-bit ···················································································································································· 70

sa duration ··············································································································································· 71

sa hex-key authentication ························································································································ 72

sa hex-key encryption ······························································································································ 74

sa idle-time ··············································································································································· 75

sa soft-duration buffer ······························································································································ 76

sa spi ························································································································································ 77

sa string-key ············································································································································· 78

sa trigger-mode ········································································································································ 80

security acl ··············································································································································· 80

snmp-agent trap enable ipsec ·················································································································· 82

tfc enable ·················································································································································· 83

transform-set ············································································································································ 84

IKE commands ···························································································· 86

aaa authorization ······································································································································ 86

authentication-algorithm ··························································································································· 87

authentication-method ······························································································································ 87

certificate domain ····································································································································· 88

client-authentication ································································································································· 89

client-authentication xauth user ··············································································································· 90

client source-udp-port dynamic ················································································································ 91

description ················································································································································ 92

dh ····························································································································································· 92

display ike proposal ·································································································································· 93

display ike sa ············································································································································ 94

display ike statistics ·································································································································· 98

dpd ··························································································································································· 99

encryption-algorithm ······························································································································· 100

exchange-mode ····································································································································· 101

ike address-group ·································································································································· 101

ike dpd ···················································································································································· 102

ike identity ·············································································································································· 103

ike invalid-spi-recovery enable ··············································································································· 104

ike keepalive interval ······························································································································ 105

ike keepalive timeout ······························································································································ 106

ike keychain ··········································································································································· 106

ike limit ··················································································································································· 107

ike logging negotiation enable················································································································ 108

ike nat-keepalive ···································································································································· 108

ike profile ················································································································································ 109

ike proposal ············································································································································ 109

ike signature-identity from-certificate ····································································································· 110

inside-vpn ··············································································································································· 111

keychain ················································································································································· 112

local-identity ··········································································································································· 113

match local address (IKE keychain view)······························································································· 114

match local address (IKE profile view) ··································································································· 115

match remote ········································································································································· 116

pre-shared-key ······································································································································· 117

priority (IKE keychain view) ···················································································································· 119

priority (IKE profile view) ························································································································ 119

proposal ················································································································································· 120

reset ike sa ············································································································································· 121

reset ike statistics ··································································································································· 121

sa duration ············································································································································· 122

sa soft-duration buffer ···························································································································· 122

snmp-agent trap enable ike ···················································································································· 123

iii

IKEv2 commands······················································································· 125

aaa authorization ···································································································································· 125

address ·················································································································································· 126

authentication-method ···························································································································· 127

certificate domain ··································································································································· 128

config-exchange ····································································································································· 129

dh ··························································································································································· 130

display ikev2 policy ································································································································ 131

display ikev2 profile ································································································································ 132

display ikev2 proposal ···························································································································· 133

display ikev2 sa ······································································································································ 134

display ikev2 statistics ···························································································································· 138

dpd ························································································································································· 139

encryption ··············································································································································· 140

hostname ··············································································································································· 141

identity ···················································································································································· 142

identity local ··········································································································································· 143

ikev2 address-group ······························································································································· 144

ikev2 cookie-challenge ··························································································································· 145

ikev2 dpd ················································································································································ 146

ikev2 ipv6-address-group ······················································································································· 147

ikev2 keychain ········································································································································ 147

ikev2 nat-keepalive ································································································································ 148

ikev2 policy ············································································································································· 149

ikev2 profile ············································································································································ 150

ikev2 proposal ········································································································································ 150

inside-vrf ················································································································································· 151

integrity ··················································································································································· 152

keychain ················································································································································· 153

match local (IKEv2 profile view) ············································································································· 154

match local address (IKEv2 policy view) ································································································ 155

match remote ········································································································································· 156

match vrf (IKEv2 policy view) ················································································································· 157

match vrf (IKEv2 profile view) ················································································································ 158

nat-keepalive ·········································································································································· 159

peer ························································································································································ 159

pre-shared-key ······································································································································· 160

prf ··························································································································································· 162

priority (IKEv2 policy view) ····················································································································· 163

priority (IKEv2 profile view) ···················································································································· 163

proposal ················································································································································· 164

reset ikev2 sa ········································································································································· 165

reset ikev2 statistics ······························································································································· 166

sa duration ············································································································································· 166

Document conventions and icons ······························································ 168

Conventions ··················································································································································· 168

Network topology icons ·································································································································· 169

Support and other resources ····································································· 170

Accessing Hewlett Packard Enterprise Support····························································································· 170

Accessing updates ········································································································································· 170

Websites ················································································································································ 171

Customer self repair ······························································································································· 171

Remote support ······································································································································ 171

Documentation feedback ······················································································································· 171

Index ·········································································································· 173

1

GRE commands

keepalive

Use keepalive to enable GRE keepalive and set the keepalive interval and the keepalive number.

Use undo keepalive to disable GRE keepalive.

Syntax

keepalive [ interval [ times ] ]

undo keepalive

Default

GRE keepalive is disabled.

Views

Tunnel interface view

Predefined user roles

network-admin

Parameters

interval: Specifies the keepalive interval, in the range of 1 to 32767 seconds. The default value is

10.

times: Specifies the keepalive number, in the range of 1 to 255. The default value is 3.

Usage guidelines

This command enables the tunnel interface to send keepalive packets at the specified interval. If the

device receives no response from the peer within the timeout time, it shuts down the local tunnel

interface. The device brings the local tunnel interface up if it receives a keepalive acknowledgment

packet from the peer. The timeout time is the result of multiplying the keepalive interval by the

keepalive number.

The device always acknowledges the keepalive packets it receives whether or not GRE keepalive is

enabled.

Examples

# Enable GRE keepalive, set the keepalive interval to 20 seconds, and set the keepalive number to

5.

<Sysname> system-view

[Sysname] interface tunnel 2 mode gre

[Sysname-Tunnel2] keepalive 20 5

2

IPsec commands

IPsec supports encrypting and decrypting only software forwarding packets on the control plane, but

not packets on the user plane. For more information about the control plane and user plane, see QoS

configuration in ACL and QoS Configuration Guide.

ah authentication-algorithm

Use ah authentication-algorithm to specify authentication algorithms for the AH protocol.

Use undo ah authentication-algorithm to restore the default.

Syntax

ah authentication-algorithm { aes-xcbc-mac | md5 | sha1 | sha256 | sha384

| sha512 } *

undo ah authentication-algorithm

Default

AH does not use any authentication algorithms.

Views

IPsec transform set view

AKA IPsec profile view

Predefined user roles

network-admin

Parameters

aes-xcbc-mac: Specifies the HMAC-AES-XCBC-96 algorithm, which uses a 128-bit key. This

keyword is available only for IKEv2.

md5: Specifies the HMAC-MD5-96 algorithm, which uses a 128-bit key.

sha1: Specifies the HMAC-SHA1-96 algorithm, which uses a 160-bit key.

sha256: Specifies the HMAC-SHA256 algorithm, which uses a 256-bit key.

sha384: Specifies the HMAC-SHA384 algorithm, which uses a 384-bit key.

sha512: Specifies the HMAC-SHA512 algorithm, which uses a 512-bit key.

Usage guidelines

You can specify multiple AH authentication algorithms for one IPsec transform set, and the algorithm

specified earlier has a higher priority.

For a manual or IKEv1-based IPsec policy, the first specified AH authentication algorithm takes effect.

To make sure an IPsec tunnel can be established successfully, the IPsec transform sets specified at

both ends of the tunnel must have the same first AH authentication algorithm.

The AH authentication algorithms specified in AKA IPsec profile view apply to only an IP Multimedia

Subsystem (IMS). You can specify multiple AH authentication algorithms for one AKA IPsec profile,

and the algorithm specified earlier has a higher priority. For successful IPsec tunnel establishment

between an IMS server and a UE, make sure the AH authentication algorithms specified for the AKA

IPsec profile have an intersection with the authentication algorithms supported by the UE. For more

information about IMS configuration, see Voice Configuration Guide.

3

Examples

# Specify HMAC-SHA1 as the AH authentication algorithm for IPsec transform set tran1.

<Sysname> system-view

[Sysname] ipsec transform-set tran1

[Sysname-ipsec-transform-set-tran1] ah authentication-algorithm sha1

description

Use description to configure a description for an IPsec policy, IPsec profile, or IPsec policy

template.

Use undo description to restore the default.

Syntax

description text

undo description

Default

No description is configured for an IPsec policy, IPsec profile, or IPsec policy template.

Views

IPsec policy view

IPsec policy template view

IPsec profile view

Predefined user roles

network-admin

Parameters

text: Specifies a description, a case-sensitive string of 1 to 80 characters.

Usage guidelines

You can configure different descriptions for IPsec policies, IPsec profiles, or IPsec policy templates

to distinguish them.

Examples

# Configure the description for IPsec policy policy1 as CenterToA.

<Sysname> system-view

[Sysname] ipsec policy policy1 1 isakmp

[Sysname-ipsec-policy-isakmp-policy1-1] description CenterToA

display ipsec { ipv6-policy | policy }

Use display ipsec { ipv6-policy | policy } to display information about IPsec policies.

Syntax

display ipsec { ipv6-policy | policy } [ policy-name [ seq-number ] ]

Views

Any view

Predefined user roles

network-admin

4

network-operator

Parameters

ipv6-policy: Displays information about IPv6 IPsec policies.

policy: Displays information about IPv4 IPsec policies.

policy-name: Specifies an IPsec policy by its name, a case-insensitive string of 1 to 63

characters.

seq-number: Specifies an IPsec policy entry by its sequence number in the range of 1 to 65535.

Usage guidelines

If you do not specify any parameters, this command displays information about all IPsec policies.

If you specify an IPsec policy name and a sequence number, this command displays information

about the specified IPsec policy entry. If you specify an IPsec policy name without any sequence

number, this command displays information about all IPsec policy entries with the specified name.

Examples

# Display information about all IPv4 IPsec policies.

<Sysname> display ipsec policy

-------------------------------------------

IPsec Policy: mypolicy

-------------------------------------------

-----------------------------

Sequence number: 1

Mode: Manual

-----------------------------

The policy configuration is incomplete:

ACL not specified

Incomplete transform-set configuration

Description: This is my first IPv4 manual policy

Security data flow:

Remote address: 2.5.2.1

Transform set: transform

Inbound AH setting:

AH SPI: 1200 (0x000004b0)

AH string-key: ******

AH authentication hex key:

Inbound ESP setting:

ESP SPI: 1400 (0x00000578)

ESP string-key:

ESP encryption hex key:

ESP authentication hex key:

Outbound AH setting:

AH SPI: 1300 (0x00000514)

AH string-key: ******

AH authentication hex key:

5

Outbound ESP setting:

ESP SPI: 1500 (0x000005dc)

ESP string-key: ******

ESP encryption hex key:

ESP authentication hex key:

-----------------------------

Sequence number: 2

Mode: ISAKMP

-----------------------------

The policy configuration is incomplete:

Remote-address not set

ACL not specified

Transform-set not set

Description: This is my first IPv4 Isakmp policy

Traffic Flow Confidentiality: Enabled

Security data flow:

Selector mode: standard

Local address:

Remote address:

Transform set:

IKE profile:

IKEv2 profile:

SA trigger mode: Auto

SA duration(time based): 3600 seconds

SA duration(traffic based): 1843200 kilobytes

SA soft-duration buffer(time based): 1000 seconds

SA soft-duration buffer(traffic based): 43200 kilobytes

SA idle time: 100 seconds

Responder only: Disabled

-------------------------------------------

IPsec Policy: mycompletepolicy

Interface: LoopBack2

-------------------------------------------

-----------------------------

Sequence number: 1

Mode: Manual

-----------------------------

Description: This is my complete policy

Security data flow: 3100

Remote address: 2.2.2.2

Transform set: completetransform

Inbound AH setting:

AH SPI: 5000 (0x00001388)

AH string-key: ******

6

AH authentication hex key:

Inbound ESP setting:

ESP SPI: 7000 (0x00001b58)

ESP string-key: ******

ESP encryption hex key:

ESP authentication hex key:

Outbound AH setting:

AH SPI: 6000 (0x00001770)

AH string-key: ******

AH authentication hex key:

Outbound ESP setting:

ESP SPI: 8000 (0x00001f40)

ESP string-key: ******

ESP encryption hex key:

ESP authentication hex key:

-----------------------------

Sequence number: 2

Mode: ISAKMP

-----------------------------

Description: This is my complete policy

Traffic Flow Confidentiality: Enabled

Security data flow: 3200

Selector mode: standard

Local address:

Remote address: 5.3.6.9

Transform set: completetransform

IKE profile:

IKEv2 profile:

SA trigger mode: Auto

SA duration(time based): 3600 seconds

SA duration(traffic based): 1843200 kilobytes

SA soft-duration buffer(time based): 1000 seconds

SA soft-duration buffer(traffic based): 43200 kilobytes

SA idle time: 100 seconds

Responder only: Disabled

# Display information about all IPv6 IPsec policies.

<Sysname> display ipsec ipv6-policy

-------------------------------------------

IPsec Policy: mypolicy

-------------------------------------------

-----------------------------

Sequence number: 1

Mode: Manual

7

-----------------------------

Description: This is my first IPv6 policy

Security data flow: 3600

Remote address: 1000::2

Transform set: mytransform

Inbound AH setting:

AH SPI: 1235 (0x000004d3)

AH string-key: ******

AH authentication hex key:

Inbound ESP setting:

ESP SPI: 1236 (0x000004d4)

ESP string-key: ******

ESP encryption hex key:

ESP authentication hex key:

Outbound AH setting:

AH SPI: 1237 (0x000004d5)

AH string-key: ******

AH authentication hex key:

Outbound ESP setting:

ESP SPI: 1238 (0x000004d6)

ESP string-key: ******

ESP encryption hex key:

ESP authentication hex key:

-----------------------------

Sequence number: 2

Mode: ISAKMP

-----------------------------

Description: This is my complete policy

Traffic Flow Confidentiality: Enabled

Security data flow: 3200

Selector mode: standard

Local address:

Remote address: 1000::2

Transform set: completetransform

IKE profile:

IKEv2 profile:

SA trigger mode: Auto

SA duration(time based): 3600 seconds

SA duration(traffic based): 1843200 kilobytes

SA soft-duration buffer(time based): 1000 seconds

SA soft-duration buffer(traffic based): 43200 kilobytes

SA idle time: 100 seconds

Responder only: Disabled

8

Table 1 Command output

Field

Description

IPsec Policy IPsec policy name.

Interface Interface applied with the IPsec policy.

Sequence number Sequence number of the IPsec policy entry.

Mode

Negotiation mode of the IPsec policy:

• Manual—Manual mode.

• ISAKMP—IKE negotiation mode.

• Template—IPsec policy template mode.

The policy configuration is incomplete

IPsec policy configuration incomplete. Possible causes include:

• The ACL is not configured.

• The IPsec transform set is not configured.

• The ACL does not have any permit statements.

• The IPsec transform set configuration is not complete.

• The peer IP address of the IPsec tunnel is not specified.

• The SPI and key of the IPsec SA do not match those in the

IPsec policy.

Description Description of the IPsec policy.

Traffic Flow Confidentiality Whether Traffic Flow Confidentiality (TFC) padding is enabled.

Security data flow ACL used by the IPsec policy.

Selector mode Data flow protection mode of the IPsec policy: standard,

aggregation, or per-host.

Local address Local end IP address of the IPsec tunnel (available only for the

IKE-based IPsec policy).

Remote address Remote end IP address or host name of the IPsec tunnel.

Transform set Transform set used by the IPsec policy.

IKE profile IKE profile used by the IPsec policy.

IKEv2 profile IKEv2 profile used by the IPsec policy.

SA trigger mode

IPsec SA negotiation triggering mode:

• Auto—Triggers SA negotiation when required IPsec

configuration is complete.

• Traffic-based—Triggers SA negotiation when traffic

requires IPsec protection.

SA duration(time based) Time-based IPsec SA lifetime, in seconds.

SA duration(traffic based) Traffic-based IPsec SA lifetime, in Kilobytes.

SA soft-duration buffer(time based) Time-based IPsec SA soft lifetime buffer, in seconds.

If the time-based IPsec SA soft lifetime buffer is not configured,

this field displays two consecutive hyphens (--).

SA soft-duration buffer(traffic based) Traffic-based IPsec SA soft lifetime buffer, in Kilobytes.

If the traffic-based IPsec SA soft lifetime buffer is not

configured, this field displays two consecutive hyphens (--).

SA idle time Idle timeout of the IPsec SA, in seconds.

If the IPsec SA idle timeout is not configured, this field displays

two consecutive hyphens (--).

Responder only State of the responder only feature:

9

Field

Description

• Enabled

• Disabled

AH string-key AH string key. This field displays ****** if the key is configured

and it is empty if the key is not configured.

AH authentication hex key AH authentication hexadecimal key. This field displays ****** if

the key is configured and it is empty if the key is not configured.

ESP string-key

ESP string key. This field displays ****** if the key is configured

and it is empty if the key is not configured.

ESP encryption hex key ESP encryption hexadecimal key. This field displays ****** if the

key is configured and it is empty if the key is not configured.

ESP authentication hex key ESP authentication hexadecimal key. This field displays ****** if

the key is configured and it is empty if the key is not configured.

Related commands

ipsec { ipv6-policy | policy }

display ipsec { ipv6-policy-template | policy-template }

Use display ipsec { ipv6-policy-template | policy-template } to display

information about IPsec policy templates

Syntax

display ipsec { ipv6-policy-template | policy-template } [ template-name

[ seq-number ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

ipv6-policy-template: Displays information about IPv6 IPsec policy templates.

policy-template: Displays information about IPv4 IPsec policy templates.

template-name: Specifies an IPsec policy template by its name, a case-insensitive string of 1 to

63 characters.

seq-number: Specifies an IPsec policy template entry by its sequence number in the range of 1 to

65535.

Usage guidelines

If you do not specify any parameters, this command displays information about all IPsec policy

templates.

If you specify an IPsec policy template name and a sequence number, this command displays

information about the specified IPsec policy template entry. If you specify an IPsec policy template

name without any sequence number, this command displays information about all IPsec policy

template entries with the specified name.

10

Examples

# Display information about all IPv4 IPsec policy templates.

<Sysname> display ipsec policy-template

-----------------------------------------------

IPsec Policy Template: template

-----------------------------------------------

---------------------------------

Sequence number: 1

---------------------------------

Description: This is policy template

Traffic Flow Confidentiality: Disabled

Security data flow :

Selector mode: standard

Local address:

IKE profile:

IKEv2 profile:

Remote address: 162.105.10.2

Transform set: testprop

IPsec SA local duration(time based): 3600 seconds

IPsec SA local duration(traffic based): 1843200 kilobytes

SA idle time: 100 seconds

Responder only: Disabled

# Display information about all IPv6 IPsec policy templates.

<Sysname> display ipsec ipv6-policy-template

-----------------------------------------------

IPsec Policy Template: template6

-----------------------------------------------

---------------------------------

Sequence number: 1

---------------------------------

Description: This is policy template

Traffic Flow Confidentiality: Disabled

Security data flow :

Selector mode: standard

Local address:

IKE profile:

IKEv2 profile:

Remote address: 200::1

Transform set: testprop

IPsec SA local duration(time based): 3600 seconds

IPsec SA local duration(traffic based): 1843200 kilobytes

SA idle time: 100 seconds

Responder only: Disabled

11

Table 2 Command output

Field

Description

IPsec Policy Template IPsec policy template name.

Sequence number Sequence number of the IPsec policy template entry.

Description Description of the IPsec policy template.

Traffic Flow Confidentiality Whether Traffic Flow Confidentiality (TFC) padding is enabled.

Security data flow ACL used by the IPsec policy template.

Selector mode Data flow protection mode of the IPsec policy template: standard,

aggregation, or per-host.

Local address Local end IP address of the IPsec tunnel.

IKE profile IKE profile used by the IPsec policy template.

IKEv2 profile IKEv2 profile used by the IPsec policy template.

Remote address Remote end IP address of the IPsec tunnel.

Transform set Transform set used by the IPsec policy template.

IPsec SA local duration(time based) Time-based IPsec SA lifetime, in seconds.

IPsec SA local duration(traffic

based) Traffic-based IPsec SA lifetime, in Kilobytes.

SA idle time Idle timeout of the IPsec SA, in seconds.

If the IPsec SA idle timeout is not configured, this field displays two

consecutive hyphens (--).

Responder only State of the responder only feature:

• Enabled

• Disabled

Related commands

ipsec { ipv6-policy | policy } isakmp template

display ipsec profile

Use display ipsec profile to display information about IPsec profiles.

Syntax

display ipsec profile [ profile-name ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

profile-name: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63

characters.

12

Usage guidelines

If you do not specify any parameters, this command displays information about all IPsec profiles.

Examples

# Display information about all IPsec profiles.

<Sysname> display ipsec profile

-------------------------------------------

IPsec profile: myprofile

Mode: isakmp

-------------------------------------------

Transform set: tran1

IKE profile: profile

SA duration(time based): 3600 seconds

SA duration(traffic based): 1843200 kilobytes

SA soft-duration buffer(time based): 1000 seconds

SA soft-duration buffer(traffic based): 43200 kilobytes

SA idle time: 100 seconds

Responder only: Disabled

-----------------------------------------------

IPsec profile: profile

Mode: manual

-----------------------------------------------

Transform set: prop1

Inbound AH setting:

AH SPI: 12345 (0x00003039)

AH string-key:

AH authentication hex key: ******

Inbound ESP setting:

ESP SPI: 23456 (0x00005ba0)

ESP string-key:

ESP encryption hex-key: ******

ESP authentication hex-key: ******

Outbound AH setting:

AH SPI: 12345 (0x00003039)

AH string-key:

AH authentication hex key: ******

Outbound ESP setting:

ESP SPI: 23456 (0x00005ba0)

ESP string-key:

ESP encryption hex key: ******

ESP authentication hex key: ******

-------------------------------------------

IPsec profile: myprofile

Mode: SDWAN

-------------------------------------------

Transform set: tran1

SA duration (time based): 3600 seconds

13

Table 3 Command output

Field

Description

IPsec profile IPsec profile name.

Mode

Negotiation mode used by the IPsec profile.

• AKA—AKA mode.

• Manual—Manual mode.

• ISAKMP—IKE negotiation mode.

• SDWAN—SDWAN mode.

Description Description of the IPsec profile.

Transform set IPsec transform set used by the IPsec profile.

IKE profile IKE profile used by the IPsec profile.

SA duration(time based) Time-based IPsec SA lifetime, in seconds.

SA duration(traffic based) Traffic-based IPsec SA lifetime, in Kilobytes.

SA soft-duration buffer(time based) Time-based IPsec SA soft lifetime buffer, in seconds.

If the time-based IPsec SA soft lifetime buffer is not configured,

this field displays two consecutive hyphens (--).

SA soft-duration buffer(traffic based) Traffic-based IPsec SA soft lifetime buffer, in Kilobytes.

If the traffic-based IPsec SA soft lifetime buffer is not

configured, this field displays two consecutive hyphens (--).

SA idle time IPsec SA idle timeout, in seconds.

If the IPsec SA idle timeout is not configured, this field displays

two consecutive hyphens (--).

Responder only State of the responder only feature:

• Enabled

• Disabled

Related commands

ipsec profile

display ipsec sa

Use display ipsec sa to display information about IPsec SAs.

Syntax

display ipsec sa [ aka | brief | count | interface interface-type

interface-number | { ipv6-policy | policy } policy-name [ seq-number ] |

profile profile-name | remote [ ipv6 ] ip-address ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

aka: Displays detailed information about IPsec SAs created by using a specified AKA IPsec profile.

This keyword is supported for only voice communications.

14

brief: Displays brief information about all IPsec SAs.

count: Displays the number of IPsec SAs.

interface interface-type interface-number: Specifies an interface by its type and

number.

ipv6-policy: Displays detailed information about IPsec SAs created by using a specified IPv6

IPsec policy.

policy: Displays detailed information about IPsec SAs created by using a specified IPv4 IPsec

policy.

policy-name: Specifies an IPsec policy by its name, a case-insensitive string of 1 to 63

characters.

seq-number: Specifies an IPsec policy entry by its sequence number. The value range is 1 to

65535.

profile: Displays detailed information about IPsec SAs created by using a specified IPsec profile.

profile-name: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63

characters.

remote ip-address: Specifies an IPsec SA by its remote end IP address.

ipv6: Specifies an IPsec SA by its remote end IPv6 address. If this keyword is not specified, the

specified remote end IP address is an IPv4 address.

Usage guidelines

If you do not specify any parameters, this command displays detailed information about all IPsec

SAs.

Examples

# Display brief information about IPsec SAs.

<Sysname> display ipsec sa brief

-----------------------------------------------------------------------

Interface/Global Dst Address SPI Protocol Status

-----------------------------------------------------------------------

HGE1/0/1 10.1.1.1 400 ESP Active

HGE1/0/1 255.255.255.255 4294967295 ESP Active

HGE1/0/1 100::1/64 500 AH Active

Global -- 600 ESP Active

Table 4 Command output

Field

Description

Interface/Global Interface where the IPsec SA belongs to or global IPsec SA (created by using an

IPsec profile).

Dst Address Remote end IP address of the IPsec tunnel.

For the IPsec SAs created by using IPsec profiles, this field displays two hyphens

(--).

SPI IPsec SA SPI.

Protocol Security protocol used by IPsec.

Status Status of the IPsec SA: Active or Standby.

In a VSRP scenario, this field displays either Active or Standby.

In standalone mode, this field always displays

Active

.

15

# Display the number of IPsec SAs.

<Sysname> display ipsec sa count

Total IPsec SAs count: 4

# Display detailed information about IPsec SAs created by using AKA IPsec profiles.

<Sysname> display ipsec sa aka

-------------------------------

IPsec AKA SA

Total IPsec AKA SAs count: 1

-------------------------------

-----------------------------

IPsec profile: profile1

Mode: AKA

-----------------------------

Encapsulation mode: transport

Flow:

sour addr: 44.1.1.3 port: 38211 protocol: tcp

dest addr: 10.10.0.72 port: 24771 protocol: tcp

[Inbound ESP SAs]

SPI: 1234563 (0x0012d683)

Connection ID: 64426789452

Algorithms set: ESP-ENCRYPT-NULL ESP-AUTH-MD5

[Outbound ESP SAs]

SPI: 1234563 (0x002d683)

Connection ID: 64428999468

Algorithms set: ESP-ENCRYPT-NULL ESP-AUTH-MD5

# Display detailed information about all IPsec SAs.

<Sysname> display ipsec sa

-------------------------------

Interface: HundredGigE1/0/1

-------------------------------

-----------------------------

IPsec policy: r2

Sequence number: 1

Mode: ISAKMP

-----------------------------

Tunnel id: 3

Encapsulation mode: tunnel

Perfect Forward Secrecy:

Inside VPN: vp1

Extended Sequence Numbers enable: Y

Traffic Flow Confidentiality enable: N

Path MTU: 1443

Transmitting entity: Initiator

Tunnel:

local address: 2.2.2.2

Page is loading ...

Aruba JH951A Reference guide

Aruba JH951A Reference guide

Related papers

Other documents