Gigabyte S251-3O0 User manual

S251-3O0

Intel Xeon Scalable UP Server System - 2U 26-Bay

User Manual

Rev. 1.0

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 User Manual: detailed information & steps about the installation, conguration and use of this

product (e.g. motherboard, server barebones), covering hardware and BIOS.



User Guide: detailed information about the installation & use of an add-on hardware or

software component (e.g. BMC rmware, rail-kit) compatible with this product.

 Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes of this product (e.g. motherboard, server barebones).

Please see the support section of the online product page to check the current availability of these

documents.

For More Information

For related product specications, the latest rmware and software, and other information please visit our website at

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our reseller

portal: http://reseller.b2b.gigabyte.com

For further technical assistance, please contact your GIGABYTE representative or visit

https://esupport.gigabyte.com/ to create a new support ticket

For any general sales or marketing enquiries, you may also message GIGABYTE server directly by email:

server[email protected]

Conventions

The following conventions are used in this user's guide:

NOTE!

Gives bits and pieces of additional

information related to the current topic.

CAUTION!

Gives precautionary measures to

avoid possible hardware or software problems.

WARNING!

Alerts you to any damage that might

result from doing or not doing specic actions.

Server Warnings and Cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING!

To reduce the risk of electric shock or damage to the equipment:

• Do not disable the power cord grounding plug. The grounding plug is an important safety

feature.

• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all

times.

• Unplug all the power cords from the power supplies to disconnect power to the equipment.

• Shock Hazard! Disconnect all power supply cords before servicing.

• Do not route the power cord where it can be walked on or pinched by items placed against it.

Pay particular attention to the plug, electrical outlet, and the point where the cord extends from

the server.

WARNING!

To reduce the risk of personal injury from hot surfaces, allow the drives

and the internal system components to cool before touching them.

WARNING!

This server is equipped with high speed fans. Keep away from hazardous

moving fan blades during servicing.

WARNING!

This equipment is not suitable for use in locations where children are

likely to be present.

WARNING!

This equipment is intended to be used in Restrict Access Location. The

access can only be gained by Skilled person.

Only authorized by well trained professional person can access the

restrict access location.

CAUTION!

• Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airow and improper cooling that can

lead to thermal damage.

• Danger of explosion if battery is incorrectly replaced.

• Replace only with the same or equivalent type recommended by the manufacturer.

• Dispose of used batteries according to the manufacturer’s instructions.

Electrostatic Discharge (ESD)

CAUTION!

ESD CAN DAMAGE DRIVES, BOARDS, AND OTHER PARTS. WE RECOMMEND THAT YOU

PERFORM ALL PROCEDURES AT AN ESD WORKSTATION. IF ONE IS NOT AVAILABLE,

PROVIDE SOME ESD PROTECTION BY WEARING AN ANTI-STATIC WRIST STRAP AT-

TACHED TO CHASSIS GROUND -- ANY UNPAINTED METAL SURFACE -- ON YOUR SERVER

WHEN HANDLING PARTS.

Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by

their edges without any component and pin touching. After removing a board from its protective

wrapper or from the system, place the board component side up on a grounded, static free sur-

face. Use a conductive foam pad if available but not the board wrapper. Do not slide board over

any surface.

System power on/o: To remove power from system, you must remove the system from

rack. Make sure the system is removed from the rack before opening the chassis, adding, or

removing any non hot-plug components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the system and discon-nect

the cables attached to the system before servicing it. Otherwise, personal injury or equipment

damage can result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage drives,

boards, and other parts. We recommend that you perform all procedures in this chapter only at

an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic

wrist strap attached to chassis ground (any unpainted metal surface on the server) when handling

parts.

ESD and handling boards: Always handle boards carefully. They can be extremely

sensi-tive to electrostatic discharge (ESD). Hold boards only by their edges. After removing a

board from its protective wrapper or from the system, place the board component side up on a

grounded, static free surface. Use a conductive foam pad if available but not the board wrapper.

Do not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that can be gripped with n-gertips

or with a pair of ne needle nosed pliers. If the jumpers do not have such a tab, take care when

using needle nosed pliers to remove or install a jumper; grip the narrow sides of the jumper with

the pliers, never the wide sides. Gripping the wide sides can dam-age the contacts inside the

jumper, causing intermittent problems with the function con-trolled by that jumper. Take care to

grip with, but not squeeze, the pliers or other tool used to remove a jumper, or the pins on the

board may bend or break.

CAUTION!

Risk of explosion if battery is replaced incorrectly or with an incorrect type. Replace the battery

only with the same or equivalent type recommended by the manufacturer. Dispose of used bat-

teries according to the manufacturer’s instructions.

- 7 -

Table of Contents

Chapter 1 Hardware Installation ...................................................................................11

1-1 Installation Precautions .................................................................................. 11

1-2 Product Specications .................................................................................... 12

1-3 System Block Diagram ................................................................................... 15

Chapter 2 System Appearance ..................................................................................... 17

2-1 System Overview ........................................................................................... 17

2-2 Front View ...................................................................................................... 18

2-3 Rear View ....................................................................................................... 18

2-4 Side View ....................................................................................................... 19

2-5 Front Panel LEDs and Buttons ....................................................................... 20

2-6 Rear System LEDs and Buttons .................................................................... 21

2-7 Power Supply Unit LED .................................................................................. 22

2-8 Hard Disk Drive LEDs .................................................................................... 23

Chapter 3 System Hardware Installation ......................................................................25

3-1 Removing Chassis Cover ............................................................................... 26

3-2 Removing and Installing the Fan Duct ........................................................... 27

3-3 Installing the CPU and Heat Sink ................................................................... 28

3-4 Installing the Memory ..................................................................................... 30

3-4-1 Eight Channel Memory Conguration .....................................................................30

3-4-2 Installing a Memory ...............................................................................................31

3-4-3 Memory Population Table .......................................................................................31

3-5 Installing the PCI Expansion Card ................................................................. 32

3-6 Installing the Hard Disk Drive ......................................................................... 33

3-7 Removing and installing the Fan Wall ............................................................ 35

3-8 Replacing the Fan Assembly .......................................................................... 36

3-9 Replacing the Power Supply .......................................................................... 37

3-10 Cable Routing ................................................................................................ 38

Chapter 4 Motherboard Components ...........................................................................45

4-1 Motherboard Components ............................................................................. 45

4-2 Jumper Setting .............................................................................................. 47

- 8 -

Chapter 5 BIOS Setup ..................................................................................................49

5-1 The Main Menu .............................................................................................. 51

5-2 Advanced Menu ............................................................................................. 54

5-2-1 Trusted Computing .................................................................................................55

5-2-2 Serial Port Console Redirection .............................................................................56

5-2-3 SIO Conguration ...................................................................................................60

5-2-4 PCI Subsystem Settings .........................................................................................61

5-2-5 USB Conguration ..................................................................................................62

5-2-6 Post Report Conguration ......................................................................................63

5-2-7 NVMe Conguration ...............................................................................................64

5-2-8 Chipset Conguration .............................................................................................65

5-2-9 Network Stack Conguration ..................................................................................66

5-2-10 iSCSI Conguration ................................................................................................67

5-2-11 Intel(R) I210 Gigabit Network Connection ..............................................................68

5-2-12 VLAN Conguration ................................................................................................70

5-2-13 Driver Health ...........................................................................................................72

5-3 Chipset Setup Menu ....................................................................................... 73

5-3-1 Processor Conguration .........................................................................................74

5-3-2 Common RefCode Conguration ...........................................................................76

5-3-3 UPI Conguration ...................................................................................................77

5-3-4 Memory Conguration ............................................................................................79

5-3-5 IIO Conguration ....................................................................................................81

5-3-6 Advanced Power Management Conguration ........................................................83

5-3-7 PCH Conguration ..................................................................................................85

5-3-8 Miscellaneous Conguration ..................................................................................87

5-3-9 Server ME Conguration ........................................................................................88

5-3-10 Runtime Error Logging Settings .............................................................................89

5-3-11 Power Policy ...........................................................................................................91

5-4 Server Management Menu ............................................................................. 93

5-4-1 System Event Log ..................................................................................................95

5-4-2 View FRU Information ............................................................................................96

5-4-3 BMC VLAN Conguration .......................................................................................97

5-4-4 BMC Network Conguration ...................................................................................98

5-4-5 IPv6 BMC Network Conguration ...........................................................................99

5-5 Security Menu .............................................................................................. 100

5-5-1 Secure Boot .........................................................................................................101

5-6 Boot Menu .................................................................................................... 103

5-6-1 UEFI NETWORK Drive BBS Priorities ................................................................105

5-6-2 UEFI Application Boot Priorities ................................................................. 106

5-7 Save & Exit Menu ......................................................................................... 107

- 9 -

5-8 BIOS POST Codes ...................................................................................... 109

5-8-1 AMI Standard - PEI ...............................................................................................109

5-8-2 AMI Standard - DXE .............................................................................................109

5-8-3 AMI Standard - ERROR ....................................................................................... 111

5-8-4 Intel UPI POST Codes .......................................................................................... 112

5-8-5 Intel UPI Error Codes ...........................................................................................112

5-8-6 Intel MRC POST Codes .......................................................................................113

5-8-7 Intel MRC Error Codes .........................................................................................113

5-8-8 Intel PM POST Codes ..........................................................................................114

5-8-9 Intel PM POST Codes ..........................................................................................114

5-9 BIOS POST Beep code (AMI standard) ....................................................... 115

5-9-1 PEI Beep Codes ...................................................................................................115

5-9-2 DXE Beep Codes .................................................................................................115

- 10 -

This page intentionally left blank

- 11 - Hardware Installation

1-1 Installation Precautions

The motherboard/system contain numerous delicate electronic circuits and components which

can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully

read the service guide and follow these procedures:

• Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

• Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

• When connecting hardware components to the internal connectors on the motherboard,

make sure they are connected tightly and securely.

• When handling the motherboard, avoid touching any metal leads or connectors.

• It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist

strap, keep your hands dry and rst touch a metal object to eliminate static electricity.

•

Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

• Before unplugging the power supply cable from the motherboard, make sure the power

supply has been turned off.

• Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

• Before using the product, please verify that all cables and power connectors of your

hardware components are connected.

• To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

• Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

• Do not place the computer system on an uneven surface

.

• Do not place the computer system in a high-temperature environment.

• Turning on the computer power during the installation process can lead to damage to

system components as well as physical harm to the user.

• If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

Chapter 1 Hardware Installation

Hardware Installation - 12 -

1-2 Product Specications

Socket

Security

Security Serve rOperating Properties

Power S upply

CPU 2nd Generation Intel® Xeon® Scalable Processors

Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon®

Silver Processor and Intel® Xeon® Bronze Processor

Intel® Xeon® W-3200 Processor Family

Socket

Security

Security Serve rOperating Properties

Power S upply

Socket 1 x LGA 4189

Socket P+

Socket

Security

Security Serve rOperating Properties

Power S upply

Chipset Intel® C621A Express Chipset

Socket

Security

Security Serve rOperating Properties

Power S upply

Memory 16 x DIMM slots

DDR4 memory supported only

8-channel memory architecture per processor

RDIMM modules up to 64GB supported

LRDIMM modules up to 128GB supported

3DS RDIMM/LRDIMM modules up to 256GB supported

1.2V modules: 3200/2933/2666 MHz

Socket

Security

Security Serve rOperating Properties

Power S upply

LAN 1 x 10/100/1000 management LAN

Socket

Security

Security Serve rOperating Properties

Power S upply

Video Integrated in Aspeed® AST2600

2D Video Graphic Adapter with PCIe bus interface

1920x1200@60Hz 32bpp, DDR4 SDRAM

Socket

Security

Security Serve rOperating Properties

Power S upply

Storage 2 x 2.5" SATA/SAS/Gen4 NVMe hot-swappable HDD/SSD bays

SAS card is required for SAS devices support

Socket

Security

Security Serve rOperating Properties

Power S upply

RAID Intel® SATA RAID 0/1/10/5

Socket

Security

Security Serve rOperating Properties

Power S upply

Expansion Slot 1 x Full-height Full-length PCIe Gen4 x16 expansion slot

2 x Low-Prole PCIe Gen4 x16 expansion slots

1 x OCP 3.0 Gen4 x16 mezzanine slot

2 x M.2 slots:

M-key

PCIe Gen4 x4 from CPU

Supports NGFF-2280/22110 cards

1 x M.2 slot:

M-key

PCIe Gen3 x4 from C621A

Supports NGFF-2280/22110 card

NOTE:

We reserve the right to make any changes to the product specications and product-related

information without prior notice.

- 13 - Hardware Installation

Socket

Security

Security Serve rOperating Properties

Power S upply

Internal I/O 3 x M.2 slot

2 x SATA ports

1 x TPM header

Socket

Security

Security Serve rOperating Properties

Power S upply

Front I/O 2 x USB 3.0

1 x miniDP

1 x MLAN

1 x Power button with LED

1 x ID button with LED

1 x System status LED

Socket

Security

Security Serve rOperating Properties

Power S upply

Backplane I/O Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port or PCIe Gen4 x4

Socket

Security

Security Serve rOperating Properties

Power S upply

TPM 1 x TPM header with SPI interface

Optional TPM2.0 kit: CTM010

Socket

Security

Security Serve rOperating Properties

Power S upply

Power Supply Redundant 800W 80 PLUS Platinum hot-swap power supply

Socket

Security

Security Serve rOperating Properties

Power S upply

System

Management

Aspeed® AST2600 management controller

GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

Dashboard

JAVA Based Serial Over LAN

HTML5 KVM

Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)

Sensor Reading History Data

FRU Information

SEL Log in Linear Storage / Circular Storage Policy

Hardware Inventory

Fan Prole

System Firewall

Power Consumption

Power Control

LDAP / AD / RADIUS Support

Backup & Restore Conguration

Remote BIOS/BMC/CPLD Update

Event Log Filter

User Management

Media Redirection Settings

PAM Order Settings

SSL Settings

SMTP Settings

Hardware Installation - 14 -

Socket

Security

Security Serve rOperating Properties

Power S upply

Environment

Ambient

Temperature

Relative

Humidity

Operating temperature: 10°C to 35°C

Non-operating temperature: -40°C to 60°C



Operating humidity: 8-80% (non-condensing)

Non-operating humidity: 20%-95% (non-condensing)

NOTE! Ambient temperature limited to 30°C if using 280W CPU

Socket

Security

Security Serve rOperating Properties

Power S upply

System

Dimension

1U

438mm (W) x 43.5mm (H) x 500mm (D)

- 15 - Hardware Installation

1-3 System Block Diagram

Hardware Installation - 16 -

This page intentionally left blank

- 17 - System Appearance

Chapter 2 System Appearance

2-1 System Overview

1

2

3

4

5

No. Description

1. Front Panel Buttons and LEDs

2. Side 3.5" Hard Drives Cover

3. System Middle Cover

4. System Back Cover

5. Power Supply Units

System Appearance - 18 -

2-3 Rear View

No. Description

1. VGA Port

2. Serial Port

3. USB 3.0 Port x 4

4. 1 GbE Ethernet LAN Port #2

5. 1 GbE Ethernet LAN Port #1

6. Server Management LAN Port

7. ID Button with LED

• Refer to section 2-5 Front Panel LEDs and Buttons and section 2-6 Rear System LEDs

and Buttons for a detailed description of the function of the LEDs.

2-2 Front View

No. Description

1. Front Panel LEDs and Buttons

2. USB 3.0 Port x 2

1 2

1 2 3 4 5 6 7

PSU2

PSU1

HDD #0

HDD #1

PCI #1

PCI #2

PCI #3

PCI #4

PCI #5

PCI #6

PCI #7

- 19 - System Appearance

2-4 Side View

Left Side

HDD #0

HDD #1

HDD #2

HDD #3

HDD #4

HDD #5

HDD #6

HDD #7

HDD #8

HDD #9

HDD #10

HDD #11

1

No. Description

1. 3.5" HDD Bays

Right Side

1

HDD #12

HDD #13

HDD #14

HDD #15

HDD #16

HDD #17

HDD #18

HDD #19

HDD #20

HDD #21

HDD #22

HDD #23

No. Description

1. 3.5" HDD Bays

System Appearance - 20 -

2-5 Front Panel LEDs and Buttons

1 3

2

5

7

4

6

No. Name Color Status Description

1. ID Button Press the button to activate system identication

2. Reset button -- -- Press this button to reset the system.

3. Power button

with LED

Green On Indicates the system is powered on.

Green Blink System is in ACPI S1 state (sleep mode).

N/A Off • System is not powered on or in ACPI S5 state (power

off)

4 & 5. LAN1/2 Active/

Link LED

Green Blink Indicates data trasmission or receiving is occuring.

N/A Off Indicates no data transmission or receiving is occuring.

6. HDD Status

LED

Amber On Indicates locating the HDD.

Blink Indicates accessing the HDD.

N/A Off Indicates HDD error.

7. System

Status LED

N/A Solid On System is operating normally.

Red

Solid On Critical condition, may indicate:

System fan failure; System temperature

Blink

Non-critical condition, may indicate:

Redundant power module failure

Temperature and voltage issue

Chassis intrusion

Page is loading ...

Gigabyte S251-3O0 User manual

Gigabyte S251-3O0 User manual

Related papers

Other documents