2. Hardy
  3. HI4060

Hardy HI4060 Template

  • I have reviewed the provided installation manual for the Cutout Template HI 4000 Series 0578-0071-01. The document provides detailed instructions for creating panel cutouts needed to install the instrument, including hole sizes and specific instructions for deburring. I'm ready to assist with any questions you have about these instructions.
  • What tool should be used after cutting the hole?
    Is this template for front or rear mounting?
    What is the diameter of the larger hole?
HI 4000 Series Panel Mount Cutout Template
Part # 0578-0071-01
1.25” Thru
AS VIEWED FROM
REAR OF THE
INSTRUMENT
.172” THRU,
9 PL
INSTRUMENT
BEZEL OUTLINE
Use a deburring
tool after cutting the hole.
INSTRUMENT
BEZEL OUTLINE
AS VIEWED FROM
FRONT OF THE
INSTRUMENT
.172” THRU
9 PL
1.25 “ THRU
Use a deburring
tool after cutting the hole.
INSTRUMENT
BEZEL OUTLINE
.172” THRU
5 PL
HI 4000 Series Retrofit Template
Part # 0578-0071-01
/