2. Hardy
  3. HI4050

Hardy HI4050 Template

  • Hello! I've reviewed the installation manual for the HI 4000 series and HI 2151/30WC panel mount instruments. This document includes detailed cutout templates for mounting the instruments, including information on hole sizes and deburring. I'm ready to help with any questions you have about this document or the installation process.
  • What is the purpose of this document?
    What should I do after cutting the hole?
    What setting should I use when printing this template?
NOTE: Verify the dimensional accuracy of any paper template before use.
To print this template, the setting for Page Scaling must be set to NONE.
1.25” Thru
.172” THRU,
9PL
Use a deburring
tool after cutting the hole.
Instrument bezel
outline
Viewed from the front
of the instrument
.172” THRU
9PL
1.25 “ THRU
Use a deburring
tool after cutting
the hole.
0578-0071-01 Rev C
6.20”
3.00”
Instrument bezel
outline
Viewed from the back
of the instrument
HI 4000 Series Panel-Mount Cutout Template
.172” THRU
5PL
HI 4000 Series Template
When used for replacing HI 2151/30WC Instruments
(excluding HI 4060)
0578-0071-01 Rev C
3.00”
6.20”
Instrument bezel
outline
NOTE: Verify the dimensional accuracy of any paper template before use.
To print this template, the setting for Page Scaling must be set to NONE.
Existing HI 2151/30WC
Instrument panel cutout
/