Mitsubishi Electric WD-62526 User manual

Brand: Mitsubishi Electric

Model: WD-62526

Category: LCD TVs

Type: User manual

PROJECTION TELEVISION

MODELS

WD-52526

WD-62526

OWNER’S GUIDE

Downloaded from www.Manualslib.com manuals search engine

For Your Records

Record the model number, serial number, and purchase date of your TV. The

model and serial numbers are on the back of the TV. Refer to this page when

requesting assistance with this product.

MODEL NUMBER (check one):

WD-52526

WD-62526

SERIAL NUMBER

PURCHASE DATE

Retailer Information

RETAILER NAME

LOCATION

Downloaded from www.Manualslib.com manuals search engine

Our Thanks...

Thank you for choosing Mitsubishi as your premier Home Entertainment provider

This Owner’s Guide describes the features and functions of your Mitsubishi

widescreen, high-definition TV. We urge you to examine this Owner’s Guide to

become familiar with the innovative features and operations this unique television

offers.

Whether this is your first Mitsubishi electronic product, or an addition to your

Mitsubishi collection, we believe you and your family will continue to enjoy your

Mitsubishi home theater for many years.

Thank you,

Mitsubishi Digital Electronics America, Inc.

Downloaded from www.Manualslib.com manuals search engine

Contents

Important Information About Your TV

Guidelines for Setting Up and Using Your New Widescreen TV ............................ 6

General Warnings and Cautions, Notes on Installation and Operation ...................... 8

Important Safeguards ............................................................... 10

FCC Compliance ................................................................... 12

Chapter 1: Television Overview

Special Features of Your TV .......................................................... 14

Package Contents .................................................................. 14

TV Front Panel ...................................................................... 15

Remote Control ..................................................................... 18

TV Back Panel ...................................................................... 20

Chapter 2: Connecting

HDTV Cable Box or Satellite Receiver with Component Video ............................ 24

Standard Cable Box, Satellite Receiver, or Other Device with S-Video ..................... 24

Wall Outlet Cable ................................................................... 25

Older Cable Box .................................................................... 25

Antenna with a Single Lead .......................................................... 26

Antennas with Separate UHF and VHF Leads .......................................... 26

VCR and an Antenna or Wall Outlet Cable (Audio & Video) ............................... 27

VCR and a Cable Box (Audio and Video Direct Connections) ............................. 28

A/V Receiver (Stereo or Surround Sound Audio System) ................................. 29

DVD Player with Component Video ................................................... 29

HDMI Device ....................................................................... 30

DVI Device ......................................................................... 30

Chapter 3: TV Operation

Choosing a Program Source (Device Selection Menu) ................................... 32

ChannelView™ Channel Listings ...................................................... 32

On-Screen Information .............................................................. 33

Operation of PIP and POP ........................................................... 34

TV Display Formats ................................................................. 36

Chapter 4: TV Menu Operations

3D Graphical Menu System .................................................. 40

Main Menu ......................................................................... 41

Setup Menu ........................................................................ 42

Input Name Menu ................................................................... 44

Icon Order Menu .................................................................... 44

Channel Menu ...................................................................... 45

Captions Menu ..................................................................... 47

V-Chip Lock Menu .................................................................. 49

Audio/Video Menu .................................................................. 53

Audio Settings .................................................................. 54

Video Settings .................................................................. 55

Downloaded from www.Manualslib.com manuals search engine

Appendices

Appendix A: Bypassing the V-Chip Lock .............................................. 59

Appendix B: Remote Control Programming ............................................ 61

Appendix C: Specifications .......................................................... 64

Appendix D: General Cleaning ....................................................... 66

Appendix E: Filter Cleaning ......................................................... 67

Appendix F: Lamp Cartridge Replacement ............................................ 68

Appendix G: Troubleshooting ........................................................ 70

System Reset Button ............................................................ 72

TV Reset Menu .................................................................. 72

Demo Mode .................................................................... 72

Service and Support ............................................................. 72

Trademark and License Information .............................................. 73

Mitsubishi LCD Rear Projection Television Limited Warranty ................. 75

Index ................................................................................... 77

Downloaded from www.Manualslib.com manuals search engine

6 Important Information About Your TV

First Steps

1 Read the section entitled “Important Information

About Your TV” on the following pages.

2 Choose a location for your TV.

• Allow for air circulation around the TV to help

prevent overheating.

• Avoid locations where light may reflect off the

screen.

• If using a stand, see the stand requirements on

pages 8 and 10.

3 Connect your other A/V devices to the TV. See

Chapter 2, “Connecting,” for recommendations.

4 Install the batteries in the remote control. See pages

18 and 19 for information on use and care of the

remote control.

5 To program the remote control to operate your other

A/V devices, see Appendix B.

6 Plug in your TV and connected devices to a power

outlet. The POWER indicator on the front of the TV

will start blinking rapidly.

7 After the indicator stops blinking, press the POWER

key to power on the TV.

8 When the Welcome screen appears the first time you

power on the TV, select a language for TV menus.

You can later change the language through the Setup

menu.

9 This TV has a demo mode for use in retail stores. To

turn off the demo mode:

1. Press TV MENU.

2. When the menu appears, press the following

buttons in sequence: 0, QV, 0

You can now start watching TV or you can perform

additional setup and customization through the TV

menus.

TV Operation

Review Chapter 3, “TV Operation,” for TV features

including:

• Device Selection (viewing source). Select a

connected device to watch, such as a VCR, DVD

player, or antenna. Press DEVICE on the remote

control to select from icons for the TV inputs or

from the device names you assigned in the Input

Name screen described above. See “Device

Selection Menu.”

• Channel Listings. Press GUIDE to view

ChannelView™ channel listings. See

“ChannelView™ Channel Guide.”

• Picture Formats. Press FORMAT to cycle

through the available picture sizes and shapes

to find the one best suited to the program you’re

watching. See “TV Display Formats.”

• PIP/POP. Press PIP/POP, PIP DEVICE, and PIP

CH to use the PIP/POP feature (Picture in Picture/

Picture outside Picture). See “Operation of PIP

and POP.”

Additional TV Setup

Review Chapter 4, “TV Menu Operations,” to

become familiar with how you can customize TV

operation. Press the TV MENU key to enter the menu

system. Some examples of what is available are:

• Memorize Channels. Mitsubishi recommends

you memorize channels if you plan to watch

over-the-air channels or programming over direct

cable. Channel memorization may take up to 15

minutes to complete. See “Setup Menu.”

• Input Name. Assign device names to the TV

inputs. Doing this makes them easier to identify

when you change program sources in the Device

Selection menu. See “Input Name Menu.”

• Icon Order. Rearrange the device icons in the

Device Selection menu. See “Icon Order Menu.”

• SuperQuickview™. Create lists of your favor-

ite channels so you can find them quickly. See

“Channel Menu.”

• Signal Strength. View a graphical signal-strength

indicator for digital channels to help you make

antenna adjustments for best reception. See

“Channel Menu.”

• Clock. If you wish to use the Timer feature, you

must first set the TV clock to the correct time.

This can be done either manually or automatically.

See “Setup Menu.”

• TV Locks. You can restrict TV viewing by

program rating or by time of day. You can also

disable the front-panel buttons—useful if you have

small children. See “V-Chip Lock Menu.”

Guidelines for Setting Up and Using Your New Widescreen TV

Downloaded from www.Manualslib.com manuals search engine

Important Information About Your TV 7

• Video Settings. Change the video adjustments

to get the best picture for your viewing conditions.

See “Audio/Video Menu.”

TV Care

Know how to care for your TV:

• Lamp Cartridge. When the lamp cartridge needs

replacement, replace the lamp yourself and

save the cost of a service call. See Appendix F

for instructions.

• Dust Filter. Clean the dust filter annually and

whenever you replace the lamp cartridge. See

Appendix E.

• General Cleaning. To keep your TV looking

its best, see the cleaning recommendations in

Appendix D.

Assistance

If you need assistance with this TV:

• For troubleshooting, service, and product support,

see Appendix G.

• For warranty information, see the TV warranty in

the back of this book.

Downloaded from www.Manualslib.com manuals search engine

8 Important Information About Your TV

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

TV WEIGHT: This TV is heavy! Exercise extreme care when lifting or moving it. Lift or move the TV with a minimum

of two adults. To prevent damage to the TV, avoid jarring or moving it while it is turned on. Always power off your TV

before moving it.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user of the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient mag-

nitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor-

tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER-

VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

C A U T I O N

Installation Notes

Stand Requirement

CAUTION: Use these Mitsubishi TV models only with

the Mitsubishi stand models shown here. Use with other

stands can result in instability and possibly cause injury.

TV Model Number Stand Model Number

WD-52526 MB-52527

WD-62526 MB-62527

Custom cabinet installation must allow for proper air circulation around the television.

NOTE TO CATV SYSTEM INSTALLER: THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER’S

ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR THE PROPER GROUNDING AND,

IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF

THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.

Unauthorized Software

Do not attempt to update the software of this TV with software or cards that are not provided by or authorized by

Mitsubishi Digital Electronics America, Inc. Non-authorized software may damage the TV and will not be covered by

the warranty.

WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or

other reproductive harm.

Downloaded from www.Manualslib.com manuals search engine

Important Information About Your TV 9

Lamp Replacement

The image on this TV is produced by a powerful lamp that will operate for many hours. Eventually, however, this lamp

will need to be replaced. Replace the lamp yourself and save the cost of a service call. Front-panel indicators

and/or on-screen messages will assist you in determining when the lamp needs to be replaced. Please see Appendix

F for details on lamp replacement.

To obtain a new lamp:

To Receive a Replacement Lamp Under Warranty To Purchase a Replacement Lamp After Warranty

Call (800) 332-2119. Please have model number,

serial number, and TV purchase date available.

Call (800) 553-7278. Order lamp part number

915P028010.

Dust-Filter Cleaning

Clean the dust filter annually and whenever you replace the lamp cartridge. See Appendix E for cleaning instructions.

A dirty filter may cause the TV to overheat (the STATUS indicator on the front panel will glow yellow). Never operate this

TV without a clean dust filter in place.

Operating Notes

Demo Mode

This TV has a demo mode for use in retail stores. To turn off demo mode:

1. Press TV MENU.

2. When the menu appears, press the following buttons in sequence:

0, QV, 0

Standby Fan

When the TV is off, you may hear a low-power standby fan. This is normal operation. The fan cools advanced circuitry

in this TV that must continue to operate even when the TV is turned off.

Temporary Residual Images

Prolonged display of stationary images on your TV may cause faint residual “ghost” images to be visible when viewing

other programs. THIS EFFECT IS TEMPORARY. The residual images will disappear within days or weeks. Most TV

and DVD programming is of generally uniform brightness and will not produce this effect.

To prevent the appearance of residual images:

• Avoid display of stationary images for extended periods on this or any other LCD projection TV. Examples of such

images include:

∙ Stationary images that may be part of video games and web pages

∙ Bright, stationary icons overlaid on moving video

∙ Side bars displayed with narrow-format video (see definition on page 37)

∙ Top and bottom bars displayed with letterbox video (see definition on page 37)

Downloaded from www.Manualslib.com manuals search engine

10 Important Information About Your TV

IMPORTANT SAFEGUARDS

Please read the following safeguards for your TV and retain for future reference. Always follow all warnings

and instructions marked on the television.

1. Read, Retain and Follow All Instructions

Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions

for future reference. Follow all operating and use instructions.

2. Heed Warnings

Adhere to all warnings on the appliance and in the operating instructions.

3. Cleaning

Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive or aerosol cleaners. Cleaners

can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning.

4. Attachments and Equipment

Never add any attachments and/or equipment without approval of the manufacturer as such additions may

result in the risk of fire, electric shock or other personal injury.

5. Water and Moisture

Do not use the TV where contact with or immersion in water is possible. Do not use near bath tubs, wash

bowls, kitchen sinks, laundry tubs, swimming pools, etc.

6. Accessories

Do not place the TV on an unstable cart, stand, tripod, or table. The TV may fall,

causing serious injury to a child or adult and serious damage to the TV. Use only with a

cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the

TV. Any mounting of the TV should follow the manufacturer’s instructions, and should

use mounting accessories recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive

force, and uneven surfaces may cause the appliance and cart combination to overturn.

7. Ventilation

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the TV and to

protect it from overheating. Do not block these openings or allow them to be obstructed by placing the TV on

a bed, sofa, rug, or other similar surface. Nor should it be placed over a radiator or heat register. If the TV is to

be placed in a rack or bookcase, ensure that there is adequate ventilation and that the manufacturer’s instruc-

tions have been adhered to.

8. Power Source

This TV should be operated only from the type of power source indicated on the marking label. If you are not

sure of the type of power supplied to your home, consult your appliance dealer or local power company.

9. Grounding or Polarization

This TV is equipped with a polarized alternating current line plug having one blade wider than the other. This

plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

10. Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point

where they exit from the TV.

11. Lightning

For added protection for this TV during a lightning storm, or when it is left unattended and unused for long

period of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent

damage to the TV due to lightning and power-line surges.

Downloaded from www.Manualslib.com manuals search engine

Important Information About Your TV 11

IMPORTANT SAFEGUARDS, continued

12. Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be

fatal.

13. Overloading

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

14. Object and Liquid Entry

Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or

short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV.

15. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the TV, be sure

the antenna or cable system is grounded so as to provide some pro-

tection against voltage surges and built-up static charges.

Article 810 of the National Electric Code, ANSI/NFPA No. 70-2002,

provides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead in wire to an antenna

discharge unit, size of grounding conductors, location of antenna dis-

charge unit, connection to grounding electrodes, and requirements

for the grounding electrode.

16. Servicing

Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage

or other hazards. Refer all servicing to qualified service personnel.

17. Damage Requiring Service

Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the following condi-

tions:

(a) When the power-supply cord or plug is damaged.

(b) If liquid has been spilled, or objects have fallen into the TV.

(d) If the TV does not operate normally by following the operating instructions, adjust only those controls that

are covered by the operating instructions as an improper adjustment of other controls may result in damage

and will often require extensive work by a qualified technician to restore the TV to its normal operation.

(e) If the TV has been dropped or the cabinet has been damaged.

(f) When the TV exhibits a distinct change in performance - this indicates a need for service.

18. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by

the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock or other hazards.

19. Safety Check

Upon completion of any service or repair to the TV, ask the service technician to perform safety checks to

determine that the TV is in safe operating condition.

20. Heat

The product should be situated away from heat sources such as radiators, heat registers, stoves or other prod-

ucts (including amplifiers) that produce heat.

ANT E NN A

LE AD IN W IR E

ANT E NN A

DIS C H AR G E UNIT

(NE C A R T I C L E 8 10- 20)

G R O UN DING

C O N DU C T O R S

(NE C A R T I C L E 8 10- 21)

G R O UN D C L AMP S

P OWE R S E R V IC E G R OUNDING

E LE C T R ODE S Y S T E M

(NE C AR T 250, P AR T H)

G R O UN D C L AMP

E LE C T R IC

S E R V IC E

E Q UIP ME NT

NE C — NAT IO NAL E L E C TR IC AL C ODE

E X AMP L E O F A NT E N NA G R O UN DIN G

Downloaded from www.Manualslib.com manuals search engine

12 Important Information About Your TV

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: To assure continued FCC compliance, the user must use a shielded video interface cable

with bonded ferrite cores at both ends when using the HDMI connections.

Changes or modifications not expressly approved by Mitsubishi could cause harmful interference and would void the

user’s authority to operate this equipment.

WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or

other reproductive harm.

Downloaded from www.Manualslib.com manuals search engine

Chapter 1

Television Overview

Special Features of Your TV ............................ 14

Package Contents .................................. 14

TV Front Panel ..................................... 15

Remote Control .................................... 18

TV Back Panel ..................................... 20

Downloaded from www.Manualslib.com manuals search engine

14 Chapter 1. Television Overview

Special Features of Your TV

Your new high-definition widescreen television has many special features that make it the perfect center of your home

entertainment system, including:

16:9 Widescreen Picture Format

Enjoy a full theatrical experience in the comfort of your home. View pictures as film directors intended them. Digital TV

broadcasts, DVDs and newer video game consoles support this widescreen format.

Integrated HDTV Tuner

Your widescreen Mitsubishi HDTV has an internal HDTV tuner able to receive both over-the-air HDTV broadcasts

(received via an antenna) and non-scrambled digital cable broadcasts, including non-scrambled HDTV cable program-

ming.

High-Definition Video Inputs

Two Component Video Inputs

This television has two component video inputs, also called Y/Pb/Pr inputs. These inputs receive standard analog

video formats of 480i (standard analog TV), 480p (progressive-scan signals), and 720p and 1080i high-definition

signals. This provides a high level of flexibility when connecting DVD players/recorders, cable boxes, and satellite

receivers.

Two HDMI Inputs

This television also has two HDMI™ inputs that accept digital 480i, 480p, 720p, and 1080i video signals plus PCM

digital stereo signals. Used with an adapter, these inputs also accept compatible DVI signals. HDMI inputs provide

additional high-performance, high-definition connections for maximum flexibility in your choice of home theater

products. The HDMI inputs are HDCP copy-protection compatible.

LCD Light Engine

Mitsubishi’s exclusive LCD Light engine features superior corner focus and SmartShutter™ dynamic aperture system.

SmartShutter™

SmartShutter™ technology displays deep blacks and improved dark scene detail. It does this by reducing light output

during dark scenes without adversely affecting other picture characteristics.

QuickMotion™

High-speed LCD drive reduces response time and displays sharp detail even during fast-moving scenes.

Plush720p™

Upconverts lower-quality video signals to deliver maximum image clarity from every source.

2. Two AAA Batteries

AAA

3. Product registration card (not pictured)

4. Owner’s Guide (not pictured)

5. Quick Reference Guide (not pictured)

Package Contents

Please take a moment to review the following list of

items to ensure that you have received everything.

108&3

)0.&

1"64&

3&$

'''8%3&83&7 1-":

4501







70-6.&

*/'0

&9$)

&/5&3

57.&/6

%&7*$&

.&/6

7$)*1

'03."5

1*1$)





427



%&7*$&

4-&&1

7*%&0

"6%*0

.65&









$)"//&-

"%+645

1*1101

1*1%&7*$&

$"/$&-

57 "6%*0

$"#-&%#4%57 %7%

7$3

(6*%&

46#

$0//&$5

1. Remote Control

Downloaded from www.Manualslib.com manuals search engine

Chapter 1. Television Overview 15

TV Front Panel

The shaded buttons on the front control panel are duplicated on the remote control. The top row of labels shows the

control functions when there are no TV menus displayed on the screen. The bottom row of labels shows the control

functions when the TV menus are displayed on the screen or when a special function has been activated. See “Remote

Control Overview” in this chapter for further details on the functions of these buttons.

4:45&.

3&4&5

If the TV does not respond to either the remote control or the front panel controls and/or

does not power off, press the SYSTEM RESET button with a pointed item, such as the end

point of a paperclip. The TV will turn off and the TIMER light will flash quickly for about one

minute. When the TIMER light stops flashing, you may again turn on the TV. The changes

you made the last time the TV was on before you used the SYSTEM RESET button may be

lost. Any changes that you previously saved are not lost.

A/ V Reset

There may be times when you wish to reset the A/V (Audio and Video) settings back to the factory defaults. To return

all settings at once, press GUIDE and FORMAT on the front panel at the same time. To reset the defaults for individual

devices, use the A/V Memory Reset selection on the Audio/Video menu.

Front Control Panel

1. System Reset 2. Lamp indicator shows lamp condition (off during normal TV operation) 3. Status

indicator (off during normal TV operation) 4. Power/Timer indicator 5. Shaded buttons are duplicates of

keys on the remote control

DEVICEGUIDE

CANCEL

ENTER

MENUFORMAT

– CH –

ADJUST

– VOL –

< >

POWER

SYSTEM

RESET LAMP STATUS TIMER

ATA

–

123 4 55

Input 3

This input can be used for convenient connection of a

camcorder or other video device to the TV. Please note

that if you connect to the S-VIDEO jack, the VIDEO jack is

automatically deactivated. The VIDEO jack is active only

when there is no S-Video connection.

*/165

47*%&07*%&0-  "6%*0 3

 

Downloaded from www.Manualslib.com manuals search engine

16 Chapter 1. Television Overview

Front-Panel LED Indicators

LAMP Indicator

Indicator Color TV Condition Additional Information

None (indicator off) Normal TV on or standby condition. Normal operation.

Green, rapid blinking TV just powered off and lamp is

cooling.

Begins to blink 30 seconds after turning off TV. TV

can be turned on before it begins to blink or after the

blinking stops, but not while the indicator is blinking.

Normal operation.

Yellow, steady Lamp nearing end of useful life.

This is a recommendation to have a new lamp ready

before the current lamp stops illuminating. See

Appendix F for ordering information.

Yellow, blinking 1. Lamp access door is open or not

secure.

TV will not operate until lamp access door is secure.

See Appendix F for installation information.

2. No lamp installed. TV will not operate without a lamp. See Appendix F

for installation information.

Red, steady Lamp no longer illuminates and has

reached the end of the lamp life.

Replace the lamp. The TV will not operate when the

lamp no longer illuminates. See Appendix F for

lamp installation instructions.

TV Front Panel, continued



%&7*$&(6*%&

$"/$&-

.&/6

&/5&3

.&/6'03."5

o$)o





"%+645

o70-o









108&3

4:45&.

3&4&5 -".145"5645*.&3



4:45&.

3&4&5

-".145"5645*.&3



%&7*$&

(6*%&

$"/$&-

.&/6

&/5&3

.&/6

'03."5

o$)o



o$)o



o$)o



"%+645

o70-o



o70-o



o70-o







108&3

-".145"5645*.&3

4:45&.

3&4&5 -".145"5645*.&3

Downloaded from www.Manualslib.com manuals search engine

Chapter 1. Television Overview 17

STATUS Indicator

Indicator Color TV Condition Additional Information

None (indicator off) Normal TV on or standby condition. Normal operation.

Yellow, steady

1. Operating temperature is too high;

dust filter may need cleaning.

See Appendix E concerning dust filter cleaning. TV

will not operate when the dust filter is clogged and

internal temperature rises too high.

2. Room temperature is too high. TV will not operate when the ambient room tempera-

ture is too high. Turn off the TV and wait until the

room temperature drops.

Yellow, blinking Dust filter cover is not in place or not

secure.

TV will not operate until the dust filter cover is

securely in place.

Red, either steady or

blinking TV may require service.

Turn off the TV and unplug the set from the AC power

source. Wait one minute and then plug the set back

in.

If the LED is still on, contact your dealer or a

Mitsubishi Authorized Service Center. See

www.mitsubishi-tv.com or call 1-800-332-2119 to

receive Authorized Service Center information.

POWER/TIMER Indicator

Indicator Color TV Condition Additional Information

None (indicator off) TV is powered OFF. Normal operation.

Green, steady TV is powered ON. Normal operation.

Green, rapid blinking

1. TV just plugged into AC outlet.

Wait until blinking stops before turning on (approxi-

mately 1 minute). Normal operation.

2. AC just restored after power

failure.

3. TV Rebooting after System Reset

used.

4. TV Rebooting after power fluctua-

tion or receiving abnormal digital

signals from digital channel.

5. You have begun the procedure to

update software from an autho-

rized flash memory device.

For detailed information, see the instructions that

accompany the authorized software update. Impor-

tant: Do not use non-authorized software at any

time.

Green, slow blinking TV powered off and automatic-on

timer is set. Normal operation. TV can be turned on at any time.

TV Front Panel, continued

Downloaded from www.Manualslib.com manuals search engine

18 Chapter 1. Television Overview

Remote Control

Overview

Figure 1, next page

1. Slide Switch: Selects the A/V device to be controlled

by the remote control. Set the slide switch to TV for

TV operation. Control of other devices requires pro-

graming (see Appendix B)

2. Numbers: Allow you to tune to a channel by entering

channel numbers; press ENTER for faster tuning. Use

numbers and the SUB key for digital sub-channels.

Enter information into menus.

3. SQV (SuperQuickView™): Scans through memo-

rized lists of favorite channels.

4. DEVICE: Displays the Device Selection menu in

which you can select the device to view (ANT 1 or

devices connected to the TV’s inputs).

5. CHANNEL: Scans up or down through memorized

channels. Pages up and down through screens when

used with ChannelView™.

6. POWER: Turns TV power on and off.

7. GUIDE: Displays or removes ChannelView™ on-

screen guide for ANT 1.

8. QV (QuickView™): Switches between the current

channel and the last channel viewed.

9. SLEEP: Sets the TV to turn off within 2 hours. See

the next page for instructions.

10. VIDEO: Selects individual video settings for adjust-

ment.

11. VOLUME: Changes sound level.

12. AUDIO: Selects individual audio settings for adjust-

ment.

13. MUTE: Turns sound off or back on.

14. ADJUST: Press to navigate menus,

change settings, and move the PIP on-screen location.

15. Light: Illuminates the buttons. Located on the left

side of the remote control.

16. ENTER/EXCH: Selects a channel number or menu

item. Exchanges PIP or POP and main TV picture.

17. TV MENU: Displays the on-screen menu

system.

18. V-CHIP: Turns the V-Chip Lock on or off.

19. FORMAT: Changes the shape and size of the main TV

picture.

20. PIP/POP: Turns on PIP and cycles through PIP and

POP display choices.

21. PIP DEVICE: Displays PIP Selection menu to select

the source device for the PIP or POP image.

22. PIP CH: When the PIP source is ANT 1, scrolls up or

down through analog channels memorized for ANT 1.

23. SUB/CANCEL: For digital channels, adds a separator

between main and sub-channel numbers. Clears SQV

and some menu entries.

24. DEVICE MENU: When programmed for the device

and with the slide switch in the appropriate position,

displays the menus for some VCRs, satellite receivers,

and DVD players.

25. HOME: Exits TV on-screen menus and displays and

returns to normal TV viewing.

26. INFO: Displays an on-screen summary of the current

device in use and any broadcast information available,

including current V-Chip information. See chapter 3

for details on the on-screen display.

29. PAUSE: Freezes a broadcast TV picture (when no

PIP/POP image is displayed). When PIP/POP is

displayed, freezes that image. See below for use with

recordable media.

Record/Playback Keys

To enable the functions described here, program the

remote for your VCR or DVD player and set the slide

switch to VCR or DVD. See Appendix B for instructions on

programming the remote.

27. REC (Record): Records with a VCR. Note that the

CONNECT function is unavailable with this TV model.

28. REW/REV: Rewinds a VCR. Reverse scans a DVD.

29. PAUSE: Pauses a VCR or DVD. See above for use

during TV viewing.

30. STOP: Stops play of a VCR or DVD.

31. FF/FWD: Fast forwards a VCR. Forward scans a

DVD.

32. PLAY: Plays a VCR or DVD.

Note

The remote control can be programmed to operate

other audio/video devices. See Appendix B for:

• instructions on programming the remote to

operate other devices.

• a list of functions available for controlling other

devices.

Downloaded from www.Manualslib.com manuals search engine

Chapter 1. Television Overview 19

Remote Control, continued

108&3

)0.&

1"64&

3&$

'''8%3&83&7 1-":

4501







70-6.&

*/'0

&9$)

&/5&3

57.&/6

%&7*$&

.&/6

7$)*1

'03."5

1*1$)





427



%&7*$&

4-&&1

7*%&0

"6%*0

.65&









$)"//&-

"%+645

1*1101

1*1%&7*$&

$"/$&-

57 "6%*0

$"#-&%#4%57 %7%

7$3

(6*%&

46#

$0//&$5

Figure 1. Remote Control Overview

Battery Installation

Figure 2

Installing the Batteries:

1. Remove the remote control’s back cover by gently

pressing the ribbed tab in the direction of the arrow

and sliding off the cover.

2. Load the batteries, making sure the polarities (+) and

(-) are correct. For best results, insert the negative (-)

side first.

"""BMLBMJOF

CBUUFSJFT

Figure 2. Installing batteries

Care

For Best Results from the Remote Control:

• Be within 20 feet of the equipment.

• Do not press two or more buttons at the same time

unless instructed.

• Do not allow unit to get wet or become heated.

• Avoid dropping on hard surfaces.

• Do not use harsh chemicals to clean. Use only a soft,

lightly moistened cloth.

• Do not mix new and old batteries.

• Do not heat, take apart, or throw batteries into fire.

• Use only AA alkaline batteries.

Hint: If the slide switch is set to TV and does

not function, press POWER and 935 to reset the

remote.

Sleep Timer

The Sleep Timer automatically shuts off the TV after the

time delay you have set.

Setting the Sleep Timer:

1. Press SLEEP on the remote control.

2. Each additional press of SLEEP increases the time

displayed by 30 minutes up until the maximum value

of 120 minutes.

3. After five seconds of inactivity, the message will dis-

appear.

4. Press SLEEP to view the time remaining before the

timer turns the TV off.

Cancelling the Sleep Timer:

1. Press SLEEP to display the on-screen message.

2. Press SLEEP repeatedly until OFF is displayed.

Note: After ﬁve seconds of inactivity, the message

box disappears.

Downloaded from www.Manualslib.com manuals search engine

20 Chapter 1. Television Overview

TV Back Panel

1. ANT 1 (Antenna)

ANT 1 can receive digital and analog over-the-air channels from a VHF/UHF antenna or non-scrambled digital/

analog cable source.

2. INPUT 1 and 2

( Audio/ Video 1 and 2)

Use INPUT 1 and 2 to connect a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver, or other

A/V device to the TV. INPUT 1 and 2 accept standard RCA-type left and right stereo audio plugs, S-Video,

and composite video. Please note that if you connect to the S-VIDEO input, the VIDEO input is automatically

deactivated.

3. COMPONENT 1 and 2

YPbPr (480i/480p/720p/1080i)

Use these inputs to connect devices with component video outputs, such as a DVD player, external HDTV receiver,

or compatible video game system. Please see Appendix C for signal compatibility.

COMPONENT

YPbPr (480i/480p/720p/1080i)

INPUT

S-VIDEO

VIDEO

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

DTV/CABLE/

VHF/UHF

DIGITAL

AUDIO

OUTPUT

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

OUTPUT

AUDIO

OUTPUT

RECORD

OUTPUT

DVI

Analog Audio

1 2 VIDEO

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

SERVICE

PORT

MONITORLINK™/HDMI

VIDEO 480i/480p/720p/1080i

AUDIO PCM LINEAR

INPUT



 

 







ANT 1

Downloaded from www.Manualslib.com manuals search engine

Page is loading ...

Mitsubishi Electric WD-62526 User manual

Brand: Mitsubishi Electric

Model: WD-62526

Category: LCD TVs

Type: User manual

Download PDF

report

Mitsubishi Electric WD-62526 User manual

Mitsubishi Electric WD-62526 User manual

Related papers

Other documents