Audioplex MonoMixer 200 B Installation guide

Audioplex
Brand
Audioplex
Model
MonoMixer 200 B
Type
Installation guide

Audioplex MonoMixer 200 B is a speaker level stereo to mono converter for bridged amps, suitable for digital amps. It eliminates the need for dual voice coil speakers and is rated at 72 watts RMS continuous. The MonoMixer 200 B is compatible with bridged, digital, and common ground amps. It is designed to work with amps having common ground outputs, bridged amps, and many digital amps. The tri-filar transformers are wound for flat response and minimum phase shift using grain oriented high silicon steel laminations. It fits into most standard single gang electrical boxes.

Audioplex MonoMixer 200 B is a speaker level stereo to mono converter for bridged amps, suitable for digital amps. It eliminates the need for dual voice coil speakers and is rated at 72 watts RMS continuous. The MonoMixer 200 B is compatible with bridged, digital, and common ground amps. It is designed to work with amps having common ground outputs, bridged amps, and many digital amps. The tri-filar transformers are wound for flat response and minimum phase shift using grain oriented high silicon steel laminations. It fits into most standard single gang electrical boxes.

MonoMixer200B
YourMonoMixer200Bisdesignedtoconvertstereosignalstomono,eliminatingthe
needfordualvoicecoilspeakers. Thisunitisspeciallydesignedtoworkwithbridged
amplifiers,includingdigitalandclassDamps.
TheMonoMixerBisratedat72wattsRMScontinuous.Suitableforampsupto100watts
perchannel. Tri-filartransformersarewoundforflatresponseandminimumphaseshift
usinggrainorientedhighsiliconsteellaminations.Fitsintomoststandardsinglegang
electricalboxes.
TECHNOLOGY
INSTALLATIONMANUAL
404GWHP.O.BOX440
MELVINVILLAGE,N.H.03850
1-800-257-2077603-544-8601FAX:603-544-8901
www.audioplex.com
AUDIOPLEXTECHNOLOGY
20131/3/13
SpeakerLevelStereotoMono
ConverterforBridgedAmps
SuitableforDigitalAmps
PreparethewireleadstoandfromtheMonoMixerBbystrippingabout1/4"ofinsulationfromeachofthewire
ends. Twiststrandstightlytogethersothatnonestickoutthatcouldcauseapossibleshort.Followthewiring
diagrambelowforinstallationofyourMonoMixerB.
INSTALLATION
WARRANTY
Your AUDIOPLEX TECHNOLOGY MonoMixerBiscoveredbyaLIFETIME WARRANTY against
anydefectsinworkmanshipandmaterials. Anydefectswillberemediedwithoutchargeforlabororparts.
Damageincurredbyshippingoraccidentisnotconsideredtobeadefect,andnotcoveredbythis
warranty. AUDIOPLEX TECHNOLOGY isnotresponsiblefordefectiveoperationcausedbyabuseorby
modificationorservicebyanyunauthorizedpersonoragency.
Theunitmustbeproperlyinstalledandoperatedaccordingtoinstructionsforthewarrantytoapply. Any
necessaryservicingmustbedoneby AUDIOPLEX TECHNOLOGY. Theproductsmustbereturnedexpenses
prepaid,withwrittenauthorizationfromthecompany. Theproductmustbeshippedwiththeproofofpurchase
andintheoriginalcartonandpackingmaterialtoavoiddamage.
L+
L-
R-
R+
Amplifier
outputs
MONOMIXER200B
-+L-R-L+R+
OUTINPUT
MONOOUT STEREOIN
TheoriginalMonoMixerworkswithampshavingcommongroundoutputs.Bridgedamps,aswellasmanydigital
amps,donothavethecommongroundconfigurationneededbytheoriginalMonoMixer. Theincreasingpopularity
ofdigitalandotherbridgedampsprompted AudioplextodeveloptheMonoMixerB,whichiscompatiblewith
bridged,digital,andcommongroundamps.
  • Page 1 1

Audioplex MonoMixer 200 B Installation guide

Audioplex
Brand
Audioplex
Model
MonoMixer 200 B
Type
Installation guide

Audioplex MonoMixer 200 B is a speaker level stereo to mono converter for bridged amps, suitable for digital amps. It eliminates the need for dual voice coil speakers and is rated at 72 watts RMS continuous. The MonoMixer 200 B is compatible with bridged, digital, and common ground amps. It is designed to work with amps having common ground outputs, bridged amps, and many digital amps. The tri-filar transformers are wound for flat response and minimum phase shift using grain oriented high silicon steel laminations. It fits into most standard single gang electrical boxes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents