Arcam rWand
Arcam rWand sends music and sounds wirelessly to supported Arcam products from an Apple iPod, iPhone, or iPad. It's easy to set up. Just insert the module into your iPod/iPhone/iPad, press and hold the ‘associate’ button for 3 seconds, and wait until the status LED flashes rapidly. Then activate the association mode on the receiving product(s) (e.g. rDAC, rCube) — see the product handbook for further details. When the association is complete, you can play your music. You only need to associate the transmitter the first time you use it with a particular receiver product.
Arcam rWand
Arcam rWand sends music and sounds wirelessly to supported Arcam products from an Apple iPod, iPhone, or iPad. It's easy to set up. Just insert the module into your iPod/iPhone/iPad, press and hold the ‘associate’ button for 3 seconds, and wait until the status LED flashes rapidly. Then activate the association mode on the receiving product(s) (e.g. rDAC, rCube) — see the product handbook for further details. When the association is complete, you can play your music. You only need to associate the transmitter the first time you use it with a particular receiver product.
Arcam rWand
Arcam rWand sends music and sounds wirelessly to supported Arcam products from an Apple iPod, iPhone, or iPad. It's easy to set up. Just insert the module into your iPod/iPhone/iPad, press and hold the ‘associate’ button for 3 seconds, and wait until the status LED flashes rapidly. Then activate the association mode on the receiving product(s) (e.g. rDAC, rCube) — see the product handbook for further details. When the association is complete, you can play your music. You only need to associate the transmitter the first time you use it with a particular receiver product.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI