Aus Electronics Direct AA6150 Quick start guide

Brand
Aus Electronics Direct
Model
AA6150
Category
Video splitters
Type
Quick start guide

Aus Electronics Direct AA6150 is a 1x4 HDR HDMI Splitter that allows you to connect one HDMI source to four HDMI displays simultaneously. It supports 4K@60Hz resolution, HDR, HLG, and Dolby Vision. The splitter also has a built-in scaler that allows you to output different resolutions to different displays. For example, you could connect a 4K@60Hz source to the splitter and output 4K@60Hz to one display and 1080p@60Hz to the other three displays. The splitter also supports Dolby Atmos and DTS-HD Master Audio pass-through. It comes with a power adapter and a user manual.

Aus Electronics Direct AA6150 is a 1x4 HDR HDMI Splitter that allows you to connect one HDMI source to four HDMI displays simultaneously. It supports 4K@60Hz resolution, HDR, HLG, and Dolby Vision. The splitter also has a built-in scaler that allows you to output different resolutions to different displays. For example, you could connect a 4K@60Hz source to the splitter and output 4K@60Hz to one display and 1080p@60Hz to the other three displays. The splitter also supports Dolby Atmos and DTS-HD Master Audio pass-through. It comes with a power adapter and a user manual.

User Manual
HDR HDMI Splitter 1x4
(4K@ 60Hz /UHD/EDID Setting/Scaler Down)
Model No：AA6150
INTRODUCITON
Picture 1.0 front panel showing
Picture 1.1 rear panel showing
Connection and operation:
*Connect according to the connection method in the above figure, source →
display device → power
Audio explanation:
Min
output audio supports all devices on the back end
Max
the HD signal source to output the best audio format that the
output connected device can support
1.Support Scale Down function, if the input signal is one HDMI 4K@60HZ Input, it
can output one 4K@60HZ resolution at one HDMI Output and output 1080P@60HZ at
the other output at the same time when you have one UHD 4K/Display and one
1080P Display for use together.
2.V-ADV Button: Please connect the Display that can support Dolby Vision to the
HDMI Output 1 Port( with “ADV”Letter mark), then press the “V-ADV” button for
three seconds, the device The “Min” and “Max” audio indicators on the upper
part flash, So the HDMI Output 1 port will output the video Dolby Vision format, the
other output port will may do not have video output if the connected display do
not support the video format Dolby Vision.
Note ： 1. Scale Down function only support the same frame resolution
conversion, like the 4K@60HZ only can down to 1080p@60HZ，4K/24HZ only can
down convert to 1080P/24HZ.
2. Scale down function only support YCBCR 4:4:4 or 4:2:0 or RGB color
format, and it do not support YCBCR 4:2:2 video format.
3、 The Dolby Vision video format scale down function is not supported.
Spec:
Mode No
AA6150
Mode name
HDR HDMI Splitter 1x4
Input channel
HDMI port x1
Output channel
HDMI port x4
Video format
HDR、HLG、Dolby Vision
Resolution format
480P/720P/1080P/4K@30Hz/4K@60Hz
Deep color
8/10/12Bit@480P/720P/1080P 8Bit@2160P
Audio format
Dolby HD/DTS HD/Dolby Atoms/Dolby AC3/DTS/LPCM
HDMI Input cable length
2160P/AWG 26 ≤5m
1080P/AWG 26 ≤10m
HDMI Output cable length
2160P/AWG 26 ≤5m
1080P/AWG 26 ≤10m
HDMI
transmission bandwidth
25~600MHz
HDMI transmission rate
0.75~18Gbps
Power adapter specification
Input: AC 100~240V Output: DC 5V/1A
Max working current
500mA
Working temperature range
0 ~ +40℃
Working humidity range
5 to 85%RH（No Condensation）
Storage temperature
-15 to 55℃
Storage humidity
5 ~95%RH(No Condensation)
Size
139x64x22 (mm)
Weight
223g
Accessories
Manual x1, Power Adaptor x1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Aus Electronics Direct AA6150 Quick start guide

Brand
Aus Electronics Direct
Model
AA6150
Category
Video splitters
Type
Quick start guide

Aus Electronics Direct AA6150 is a 1x4 HDR HDMI Splitter that allows you to connect one HDMI source to four HDMI displays simultaneously. It supports 4K@60Hz resolution, HDR, HLG, and Dolby Vision. The splitter also has a built-in scaler that allows you to output different resolutions to different displays. For example, you could connect a 4K@60Hz source to the splitter and output 4K@60Hz to one display and 1080p@60Hz to the other three displays. The splitter also supports Dolby Atmos and DTS-HD Master Audio pass-through. It comes with a power adapter and a user manual.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents