Dacor CABP3 Planning Guides

Brand: Dacor

Model: CABP3

Type: Planning Guides

All specications subject to change without notice.

Phone: (800) 793-0093www.dacor.com

PLANNING

GUIDE

CABP3

Renaissance

Cabinet Blower

Document # PG09-001

Revised 12/06/11 Page 1/1

Total Connected

Load

Blower Rating*

(CFM)

Approximate

Shipping Weight

4 Amps. @

120Vac, 60 Hz

600 Nominal

585.6 Actual

34 lbs.

* At zero inches static pressure

NOTE: The CABP3 cabinet blower is approved only for

use with Dacor RV series raised vents.

19 3/8"

(49.2 cm)

18 7/8"

(47.9 cm)

18 7/8" (47.9 cm)

18 3/8" (46.7 cm)

17 7/8" (45.4 cm)

TOP VIEW

5 3/4"

(14.6 cm)

Ø 7/8" (2.2 cm)

(Grommet Hole)

2" (5.1 cm)

1/2" (1.3 cm)

17" (43.2 cm)

3 3/4"

(9.5 cm)

ELECTRICAL LOCATION SIDE VIEW

9 3/4"

(24.8 cm)

17"

(43.2 cm)

(7.6 cm)

DUCT LOCATION SIDE VIEW

Electrical Wiring

Access Hole

3/8” (9 mm)

mounting flange

around perimeter

ISOMETRIC VIEW

All tolerances: ±1/16” (±1.6 mm) unless otherwise stated

WARNING

• Observe all governing codes and ordinances during planning

and installation. Contact your local building department for

further information.

• This appliance must be installed in accordance with the RV

series Raised Vent Installation Instructions.

Dacor CABP3 Planning Guides

Dacor CABP3 Planning Guides

Dacor CABP3 Planning Guides

Related papers

Other documents