2. Computers & electronics
  3. Data storage
  4. Data storage mediums
  5. Cleaning media
  6. Kodak
  7. Ngenuity 9090DB
Ngenuity 9090DB

Kodak Ngenuity 9090DB, Ngenuity 9090DC Reference guide

  • Hello! I am an AI chatbot trained to assist you with the Kodak Ngenuity 9090DB Reference guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Activity #
1
Frequency Symptoms Cleaning Material
2
Clean Feed Rollers (skimmer
rollers & separator roller)
10,000 pages / Daily
Skewed documents, excessive
multifeeds, feeder jams
Cleaning wipes
Clean Transport 50,000 pages / Weekly Page frame errors, transport jams Lint free cleaning cloth
Clean Transport Rollers 50,000 pages / Weekly Page frame errors, transport jams Transport cleaning sheets
Skimmer Tires and Separator
Roller Replacement
600,000 scans (250,000 NCR) Excessive multifeeds, feeder jams Replacement tires and rollers
Clean Optics
3
:
Clean Glass Flats 50,000 pages / Daily
Fuzzy images, streaks on images,
reduced OCR/ICR/bar code
recognition rates
Roller & Glass cleaner with Lint
free cloth (spray cleaner on cloth,
not in scanner)
Clean Cameras' Glass Covers 50,000 pages / Daily
Fuzzy images, streaks on images,
reduced OCR/ICR/bar code
recognition rates
Lint free swab
Clean Transport Sensors
(entry & exit)
50,000 pages / Daily Entry/exit errors
Clean Paper Present Sensor 50,000 pages / Daily
Feeder table won't lower when out of
paper
©2009 BÖWE BELL + HOWELL, All Rights Reserved. S008771 Rev A
Quick Reference Maintenance Guide
Blower brush
The instructions and descriptions contained in this Quick Reference Maintenance Guide were accurate at the time of publishing; howver, succeeding products and documents are
subject to change without notice. Therefore, BÖWE BELL + HOWELL Scanners, L.L.C. assumes no liability for damages directly or indirectly from errors, omissions, or discrepancies
between the product and this Quick Reference Maintenance Guide.
1
A complete set of cleaning and replacement instructions can be found in the Maintenance section of the Ngenuity Operator Manual (S008769)
2
Cleaning Material used should be limited to those items/products included in the Ngenuity Cleaning Kits provided by BÖWE BELL + HOWELL
3
All components that are considered part of the scanner Optics should be cleaned at the same time. Caution: LEDs (lamps) are NOT considered part
of the scanner Optics and should NOT be cleaned or wiped using any type of solvent!
/