Juniper ACX5096 Hardware Guide

ACX5048 and ACX5096 Universal Metro

Router Hardware Guide

Published

2022-01-23

Juniper Networks, Inc.

1133 Innovaon Way

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc.

in the United States and other countries. All other trademarks, service marks, registered marks, or registered service

marks are the property of their respecve owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right

to change, modify, transfer, or otherwise revise this publicaon without noce.

ACX5048 and ACX5096 Universal Metro Router Hardware Guide

The informaon in this document is current as of the date on the tle page.

YEAR 2000 NOTICE

Juniper Networks hardware and soware products are Year 2000 compliant. Junos OS has no known me-related

limitaons through the year 2038. However, the NTP applicaon is known to have some diculty in the year 2036.

END USER LICENSE AGREEMENT

The Juniper Networks product that is the subject of this technical documentaon consists of (or is intended for use

with) Juniper Networks soware. Use of such soware is subject to the terms and condions of the End User License

Agreement ("EULA") posted at hps://support.juniper.net/support/eula/. By downloading, installing or using such

soware, you agree to the terms and condions of that EULA.

ii

Table of Contents

About This Guide | viii

1

Overview

ACX5048 and ACX5096 System Overview | 2

ACX5000 Universal Metro Router Overview | 2

ACX5000 Router Models | 4

Field-Replaceable Units in an ACX5000 Router | 5

Understanding Hardware Redundancy of an ACX5000 Router Components and Funconality | 7

ACX5000 Routers Hardware and CLI Terminology Mapping | 7

Protocols and Applicaons Supported by ACX Series Routers | 11

ACX5048 and ACX5096 Chassis | 45

Management Panel of an ACX5000 Router | 45

Port Panel of an ACX5048 Router | 48

Port Panel of an ACX5096 Router | 49

Chassis Status LEDs on an ACX5000 Router | 52

Management Port LEDs on an ACX5000 Router | 55

Access Port and Uplink Port LEDs on an ACX5000 Router | 56

ACX5048 and ACX5096 Cooling System | 60

Cooling System and Airow in an ACX5000 Router | 60

Fan Module LED on an ACX5000 Router | 65

ACX5048 and ACX5096 Power System | 66

AC Power Supply for an ACX5000 Router | 67

AC Power Supply LEDs on an ACX5000 Router | 70

DC Power Supply for an ACX5000 Router | 71

DC Power Supply LEDs on an ACX5000 Router | 74

iii

AC Power Specicaons for an ACX5000 Router | 75

AC Power Cord Specicaons for an ACX5000 Router | 77

DC Power Specicaons for an ACX5000 Router | 78

2

Site Planning, Preparaon, and Specicaons

Site Preparaon Checklist for an ACX5000 Router | 81

ACX5048 and ACX5096 Site Guidelines and Requirements | 82

General Site Guidelines | 83

Site Electrical Wiring Guidelines | 83

Clearance Requirements for Airow and Hardware Maintenance for an ACX5000 Router | 85

Chassis Physical Specicaons for an ACX5000 Router | 86

ACX5000 Router Environmental Specicaons | 86

ACX5000 Chassis Grounding Cable and Lug Specicaons | 88

Cabinet Requirements for an ACX5000 Router | 89

Rack Requirements for an ACX5000 Router | 90

ACX5048 and ACX5096 Network Cable and Transceiver Planning | 93

Determining Transceiver Support for the ACX5000 | 93

Cable Specicaons for QSFP+ and QSFP28 Transceivers | 94

Calculang Power Budget and Power Margin for Fiber-Opc Cables | 97

How to Calculate Power Budget for Fiber-Opc Cables | 97

How to Calculate Power Margin for Fiber-Opc Cables | 97

Fiber-Opc Cable Signal Loss, Aenuaon, and Dispersion | 99

ACX5048 and ACX5096 Management Cable Specicaons and Pinouts | 101

Cable Specicaons for Console and Management Connecons for an ACX5000 Router | 101

Management Port Connector Pinouts for an ACX5000 Router | 102

Console Port Connector Pinouts for an ACX5000 Router | 103

USB Port Specicaons for an ACX5000 Router | 104

3

Inial Installaon and Conguraon

iv

ACX5048 and ACX5096 Installaon Overview | 107

Unpacking and Mounng the ACX5048 and ACX5096 Routers | 108

Unpacking an ACX5000 Router | 108

Mounng an ACX5000 Router in a Rack or Cabinet | 109

Before You Begin Rack Installaon | 110

Four Post Procedure | 111

Two Post Procedure | 114

Connecng the ACX5048 and ACX5096 to Power | 116

Connecng the ACX5000 Router to Earth Ground | 116

Connecng AC Power to an ACX5000 Router | 119

Connecng DC Power to an ACX5000 Router | 121

Connecng the ACX5048 and ACX5096 to External Devices | 126

Connecng an ACX5000 Router to a Management Console | 126

Connecng an ACX5000 Router to a Network for Out-of-Band Management | 127

Inially Conguring the ACX5000 Router | 129

4

Removing, Installing, and Maintaining Components

Maintaining ACX5048 and ACX5096 Components | 133

Removing a Transceiver from an ACX5000 Router | 133

Installing a Transceiver in an ACX5000 Router | 135

Disconnecng a Fiber-Opc Cable from an ACX5000 Router | 137

Connecng a Fiber-Opc Cable to an ACX5000 Router | 138

Maintaining Fiber-Opc Cables in an ACX5000 Router | 139

Removing a Fan Module from an ACX5000 Router | 139

Installing a Fan Module in an ACX5000 Router | 142

Removing a Power Supply from an ACX5000 Router | 143

Installing a Power Supply in an ACX5000 Router | 146

Powering O an ACX5000 Router | 148

v

Removing an ACX5000 Router from a Rack or Cabinet | 151

5

Troubleshoong Hardware

Troubleshoong ACX5048 and ACX5096 | 154

Understanding the ACX5000 Router Alarms | 154

ACX5000 Router Interface Alarm Messages | 156

6

Contacng Customer Support

Contacng Customer Support and Returning the Chassis or Components | 158

Contact Customer Support | 158

Returning an ACX5000 Router or Component for Repair or Replacement | 159

Locang the Serial Number on an ACX5000 Router or Component | 160

Lisng the Chassis and Component Details Using the CLI | 160

Locang the Chassis Serial Number ID Label on an ACX5000 Router | 162

Locang the Serial Number ID Labels on FRU Components | 162

Packing an ACX5000 Router or Component for Shipping | 163

Packing an ACX5000 Router for Shipping | 163

Packing an ACX5000 Router Components for Shipping | 164

7

Safety and Compliance Informaon

General Safety Guidelines and Warnings | 167

Denions of Safety Warning Levels | 168

Qualied Personnel Warning | 170

Warning Statement for Norway and Sweden | 170

Fire Safety Requirements | 171

Installaon Instrucons Warning | 172

Chassis and Component Liing Guidelines | 173

Restricted Access Warning | 173

Ramp Warning | 175

Rack-Mounng and Cabinet-Mounng Warnings | 175

vi

Grounded Equipment Warning | 179

Radiaon from Open Port Apertures Warning | 180

Laser and LED Safety Guidelines and Warnings for the ACX5000 Router | 181

Maintenance and Operaonal Safety Guidelines and Warnings | 187

General Electrical Safety Guidelines and Warnings | 192

Acon to Take Aer an Electrical Accident | 194

Prevenon of Electrostac Discharge Damage | 194

AC Power Electrical Safety Guidelines | 196

AC Power Disconnecon Warning | 197

ACX5000 DC Power Electrical Safety Guidelines and Warnings | 198

DC Power Copper Conductors Warning | 199

DC Power Disconnecon Warning | 200

DC Power Grounding Requirements and Warning | 202

DC Power Wiring Sequence Warning | 202

DC Power Wiring Terminaons Warning | 204

Mulple Power Supplies Disconnecon Warning | 205

TN Power Warning | 206

Agency Approvals for an ACX5000 Router | 207

Compliance Statements for EMC Requirements for the ACX5000 Router | 208

vii

About This Guide

Use this guide to install hardware and perform inial soware conguraon, roune maintenance, and

troubleshoong for the ACX5048 and ACX5096 Universal Metro router. Aer compleng the

installaon and basic conguraon procedures covered in this guide, refer to the Junos OS

documentaon for informaon about further soware conguraon.

SEE ALSO

Chassis Physical Specicaons for an ACX5000 Router | 86

ACX5000 Router Models

Table 1 on page 5 lists the ACX5000 router models. The ACX5000 routers are available in 48 port or

96 port conguraons. The routers are available with either AC or DC power supply and with airow-

out (AFO) cooling.

4

Table 1: ACX5000 Router Model Numbers and Descripon

Model Number Ports Power

Supply

Number

of

Manage

ment

Ports

Airow

ACX5048-AC 48 SFP+ and 6 QSFP+

transceivers

AC 3 Air Out (front-to-

back)

ACX5048-DC 48 SFP+ and 6 QSFP+

transceivers

DC 3 Air Out (front-to-

back)

ACX5096-AC 96 SFP+ and 8 QSFP+

transceivers

AC 2 Air Out (front-to-

back)

ACX5096-DC 96 SFP+ and 8 QSFP+

transceivers

DC 2 Air Out (front-to-

back)

CAUTION: Do not mix dierent types (AC and DC) of power supplies in the same

chassis.

SEE ALSO

Determining Transceiver Support for the ACX5000 | 93

Field-Replaceable Units in an ACX5000 Router

Field-replaceable units (FRUs) are components that you can replace at your site. The ACX5000 FRUs are

hot-insertable and hot-removable: you can remove and replace them without powering o the router or

disrupng the roung funcon.

The following are the ACX5000 FRUs:

• Power supplies

5

• Fan modules

Table 2 on page 6 lists the FRUs for the ACX5000 and acons to take before removing them.

Table 2: FRUs in ACX5000 Routers and Acon Required Before Removing Them

FRUs Required Acon

Power supplies None

Fan modules None

CAUTION: Replace a failed power supply with a blank panel or new power supply

within one minute of removal to prevent chassis overheang. The router connues to

operate with only one power supply running. Replace a failed fan module with a new

fan module within one minute of removal to prevent chassis overheang. Do not

operate the router with missing FRUs for longer than one minute.

NOTE: If you have a Juniper J-Care service contract, register any addion, change, or upgrade of

hardware components at hps://www.juniper.net/customers/csc/management/

updateinstallbase.jsp . Failure to do so can result in signicant delays if you need replacement

parts. This note does not apply if you replace exisng components with the same type of

component.

NOTE: Before removing the opcal transceivers, we recommend that you disable the interface

using the set interfaces

interface-name

disable command. See "Disconnecng a Fiber-Opc

Cable from an ACX5000 Router" on page 137.

SEE ALSO

Installing a Power Supply in an ACX5000 Router | 146

Removing a Power Supply from an ACX5000 Router | 143

Installing a Fan Module in an ACX5000 Router | 142

Removing a Fan Module from an ACX5000 Router | 139

6

Understanding Hardware Redundancy of an ACX5000 Router

Components and Funconality

The following hardware components provide redundancy on an ACX5000 router:

• Power supplies—The ACX5000 router has one or two power supplies. Each power supply provides

power to all components in the router. If two power supplies are installed, the two power supplies

provide full power redundancy to the device. If one power supply fails or is removed, the second

power supply balances the electrical load without interrupon.

To provide power redundancy to the system both power supplies must be installed. Connect power

source feed

A

to one power supply and power source feed

B

to the second power supply.

CAUTION: Do not connect feed

A

and feed

B

to the same power supply input

terminal.

• Cooling system—The 1 U ACX5048 router has ve fan modules; the 2 U ACX5096 router has three

fan modules. If a fan module fails and is unable to keep the ACX5000 router within the desired

temperature thresholds, chassis alarms occur and the ACX5000 router can shut down.

SEE ALSO

AC Power Supply for an ACX5000 Router | 67

DC Power Supply for an ACX5000 Router | 71

Cooling System and Airow in an ACX5000 Router | 60

ACX5000 Routers Hardware and CLI Terminology Mapping

IN THIS SECTION

ACX5048 Router Hardware and CLI Terminology Mapping | 8

ACX5096 Router Hardware and CLI Terminology Mapping | 9

7

ACX5048 Router Hardware and CLI Terminology Mapping

Table 3 on page 8 describes the hardware terms used in an ACX5048 router documentaon and the

corresponding terms used in the Junos OS command line interface (CLI). Figure 3 on page 9 shows

the port locaons of the interfaces.

Table 3: CLI Equivalents of Terms Used in Documentaon for an ACX5048 Router

Hardware

Item (as

displayed in

the CLI)

Descripon (as

displayed in the

CLI)

Value (as displayed

in the CLI)

Item in Documentaon Addional Informaon

Chassis ACX5048 – Router chassis "Chassis Physical

Specicaons for an

ACX5000 Router" on

page 86

FPC (

n

) Abbreviated name

of the Flexible PIC

Concentrator

(FPC)

Value of

n

is always

0.

The router does not

have actual FPCs. In this

case, FPC refers to the

router itself.

Interface Naming

Convenons Used in the

Junos OS Operaonal

Commands

PIC (

n

) Abbreviated name

of the Physical

Interface Card

(PIC)

Value of

n

is always

0.

The router does not

have actual PIC devices;

see entries for PIC 0 for

the equivalent item on

the router.

Interface Naming

Convenons Used in the

Junos OS Operaonal

Commands

48x10G–6x40G PIC 0 Built-in network ports

on the front panel of the

router

"ACX5000 Universal

Metro Router Overview"

on page 2

Xcvr (

n

) Abbreviated name

of the transceiver

n

is a value

equivalent to the

number of the port

in which the

transceiver is

installed.

Opcal transceivers

Port and Interface

Specicaons

8

Table 3: CLI Equivalents of Terms Used in Documentaon for an ACX5048 Router

(Connued)

Hardware

Item (as

displayed in

the CLI)

Descripon (as

displayed in the

CLI)

Value (as displayed

in the CLI)

Item in Documentaon Addional Informaon

Power

supply (

n

)

Power supply

n

is a value in the

range of 0-1.

AC power supply

DC power supply

"AC Power Supply for an

ACX5000 Router" on

page 67

"DC Power Supply for an

ACX5000 Router" on

page 71

Fan Fan

n

is a value in the

range of 0-4.

Fan "Cooling System and

Airow in an ACX5000

Router" on page 60

Figure 3: ACX5048 Interface Port Mapping

1—Electrostac Discharge (ESD) terminal 3—40 Gigabit Ethernet ports (6)

2—10 Gigabit Ethernet ports (48)

ACX5096 Router Hardware and CLI Terminology Mapping

Table 4 on page 10 describes the hardware terms used in an ACX5096 router documentaon and the

corresponding terms used in the Junos OS command line interface (CLI). Figure 4 on page 11 shows

the port locaons of the interfaces.

9

Table 4: CLI Equivalents of Terms Used in Documentaon for an ACX5096 Router

Hardware

Item (as

displayed in

the CLI)

Descripon (as

displayed in the

CLI)

Value (as displayed

in the CLI)

Item in Documentaon Addional Informaon

Chassis ACX5096 – Router chassis "Chassis Physical

Specicaons for an

ACX5000 Router" on

page 86

FPC (

n

) Abbreviated name

of the Flexible PIC

Concentrator

(FPC)

Value of

n

is always

0.

The router does not

have actual FPCs. In this

case, FPC refers to the

router itself.

Interface Naming

Convenons Used in the

Junos OS Operaonal

Commands

PIC (

n

) Abbreviated name

of the Physical

Interface Card

(PIC)

Value of

n

is always

0.

The router does not

have actual PIC devices;

see entries for PIC 0 for

the equivalent item on

the router.

Interface Naming

Convenons Used in the

Junos OS Operaonal

Commands

96x10G–8x40G PIC 0 Built-in network ports

on the front panel of the

router

"ACX5000 Universal

Metro Router Overview"

on page 2

Xcvr (

n

) Abbreviated name

of the transceiver

n

is a value

equivalent to the

number of the port

in which the

transceiver is

installed.

Opcal transceivers

Port and Interface

Specicaons

Power

supply (

n

)

Built-in power

supply

n

is a value in the

range of 0-1.

AC power supply

DC power supply

"AC Power Supply for an

ACX5000 Router" on

page 67

"DC Power Supply for an

ACX5000 Router" on

page 71

10

Table 4: CLI Equivalents of Terms Used in Documentaon for an ACX5096 Router

(Connued)

Hardware

Item (as

displayed in

the CLI)

Descripon (as

displayed in the

CLI)

Value (as displayed

in the CLI)

Item in Documentaon Addional Informaon

Fan Fan

n

is a value in the

range of 0-2 for

ACX5096

Fan "Cooling System and

Airow in an ACX5000

Router" on page 60

Figure 4: ACX5096 Interface Port Mapping

1—Electrostac Discharge (ESD) terminal 3—40 Gigabit Ethernet ports (8)

2—10 Gigabit Ethernet ports (96)

Protocols and Applicaons Supported by ACX Series Routers

Table 5 on page 12 contains the rst Junos OS Release support for protocols and applicaons on ACX

Series routers. A dash indicates that the protocol or applicaon is not supported.

NOTE:

•The [edit logical-systems

logical-system-name

] hierarchy level is not supported on ACX Series

routers.

11

• The ACX Series routers does not support per-family maximum transmission unit (MTU)

conguraon. The MTU applied to family inet gets applied to other families as well, even

though it can be congured though CLI and visible in show interface extensive output. The only

way to use higher MTU for a family is to manipulate the MTU, apply at interface or family inet

levels, and let it calculate for each family automacally. MTU values are not limited to 1500

but can range between 256 to 9216.

For more informaon, see the Knowledge Base (KB) arcle KB28179 at: hps://

kb.juniper.net/InfoCenter/index?page=content&id=KB28179.

Table 5: Protocols and Applicaons Supported by ACX Series Routers

Protocol or Applicaon ACX1

000

ACX1

100

ACX2

000

ACX2

100

ACX2

200

ACX4

000

ACX5

048

ACX5

096

ACX5

00

ACX5

448

Interface and Encapsulaon Types

Ethernet interfaces—1G,

10G

12.2 12.2R

2

12.2 12.2R

2

12.3X

54

–D15

12.3x

51

-D10

15.1X

54

–D20

15.1X

54

–D20

12.3X

54

–D20

(Indoo

r)

12.3X

54

–D25

(Outd

oor)

18.2R

1

Ethernet interfaces—

40G

––––––15.1X

54

–D20

15.1X

54

–D20

– 18.2R

1

ATM interfaces (IMA

only)

12.2 – 12.2 12.2R

2

– – – – – –

E1 interfaces 12.2 – 12.2 12.2R

2

– – – – – –

12

Page is loading ...

Juniper ACX5096 Hardware Guide

This manual is also suitable for

Juniper ACX5096 Hardware Guide

Related papers

Other documents