2 1
6. Operating instruction for receiver :
7. :The Learning ID Method
Canceling ID:
Short press “ID learning button” on the
TAPEDRIVE-WIFI4
receiver, the running light
keeps on. Then press any key or touch circle on the PILOTctl1 touch panel,
the running light flick er several times, activated.
Lear ning ID:
3
Long press “ID learning button” on the receiver for 5s, the running
light flick er several times, canceled.
PILOTctl-1 touch panel
1.
2.
3.
Uninstall
4. 5.
fiche de sortie
DMX
On/Off
Delay Off
PILOTctl-1and TAPEDRIVER-WIFI4
www.contest-lighting.com
PILOTctl-1and TAPEDRIVER-WIFI4 user guide
TAPEDRIVER-WIFI4 CV receiver
PILOTctl-1
TAPEDRIVER-WIFI4
PILOTctl-1 TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
TAPEDRIVE-WIFI4
PILOTctl-1and TAPEDRIVER-WIFI4 user guide
100-240 V AC
RF 2.4GHz+DMX
Max 30m
Synchro
: -30°C à 55°C
L86×W86×H36(mm)
225g
RF remote distance :
Output signal :
Remote option :
Working temperature :
Dimensions :
Weight (G.W) :
Input voltage :
5-24V DC
5Ax4 Ch MAX 20A
100W/244W/480(5V/12V/24V)
-30°C à 55°C
L178×W48×H33(mm)
150g
Max current load :
Max output power :
Working temperature :
Dimensions :
Weight (G.W) :
Input voltage :
Product size :
Installation instruction :
Key functions :
Brightness- Brightness+
Touch circle
Save key
long press to save the
current brightness
Long press to switch ON/OFF the tone
Terminals :
Entrée
alimentation
5-24V DC
Power supply input
ID learning button LED lamp connection
socket
Running light
Technical Specs:
5
4 6
9. Connect to DMX driver ):Wiring Diagram 2 (
8. Wiring Diagram 1 ( Wireless Control ):
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
www.contest-lighting.com
PILOTctl-1and TAPEDRIVER-WIFI4 user guide PILOTctl-1and TAPEDRIVER-WIFI4 user guide
Because CONTEST® takes the utmost care in its products to
make sure you only get the best possible quality, our products
are subjects to modifications without prior notice. That is why
technical specifications and the products physical configuration
might differ from the illustrations.
Make sure you get the latest news and updates about the
CONTEST® products on www.contest-lighting.com
CONTEST® is a trademark of HITMUSIC S.A. - Zone Cahors
sud - 46230 FONTANES - FRANCE
RSON
109 8 7 6
5
4
3
2 1
PILOTctl-1 TAPEDRIVER-1 Single color strip
Input Voltage: AC100~240V
Output Signal: RF 2.4G + DMX512
RF Remote Distance: 30m
Remote Option: Sync Control
Input Voltage: DC5V~DC24V
Max Current Load: 5A × 4CH Max. 20A
Max Output Power: 100W/240W/480W(5V/12V/24V)
Working Temperature: -30°C ~55°C
Package Size: L178×W48×H33(mm)
Weight(G.W.): 150g
1. Technical Specs:
Working Temperature: -20°C ~60°C
Package Size: L113×W112×H50(mm)
Weight(G.W.): 225g
2. Product Size:
3. Installation Instruction:
4. Key Functions: 5. Terminals:
Long press to turn on/off the tone. AC100-240V
Power Input Socket
DMX Signal
Output Socket
6. Operating Instruction for Receiver:
7. :The Learning ID Method
Canceling ID:
Short press “ID learning button” on the receiver, the running light
keeps on. Then press any key or touch circle on the PILOTctl2 touch panel, the
running light flicker several times, activated.
Learning ID:
Long press “ID learning button” on the receiver for 5s, the running
light flicker several times, canceled.
Speed/
Brightness-
On/Off
Speed/
Brightness+
Touch Circle
Mode Key Save Key
Long press to save
current CT.
2 1 3
LED Lamp
Connection Socket
The Running Light
ID learning Button
DC5V~24V
Power Input Socket
PILOTctl-2 cold/warm touch panel
PILOTctl-2 and TAPEDRIVER-WIFI4 user guide
www.contest-lighting.com
PILOTctl-2 and TAPEDRIVER-WIFI4 user guide PILOTctl-2 and TAPEDRIVER-WIFI4 user guide
TAPEDRIVER-WIFI4 CV receiver
PILOTctl-2
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
TAPEDRIVE-WIFI4
TAPEDRIVER-WIFI4
TAPEDRIVE-WIFI4
PILOTctl-2
9. Connect to DMX driver):Wiring Diagram 2 (
8. Wiring Diagram 1 ( Wireless Control ):
5 4 6 www.contest-lighting.com
PILOTctl-2 and TAPEDRIVER-WIFI4 user guide PILOTctl-2 and TAPEDRIVER-WIFI4 user guide
Because CONTEST® takes the utmost care in its products to
make sure you only get the best possible quality, our products
are subjects to modifications without prior notice. That is why
technical specifications and the products physical configuration
might differ from the illustrations.
Make sure you get the latest news and updates about the
CONTEST® products on www.contest-lighting.com
CONTEST® is a trademark of HITMUSIC S.A. - Zone Cahors
sud - 46230 FONTANES - FRANCE
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
PILOTctl-2 TAPEDRIVER-3 cold/warm LED strip
6. Operating Instruction for Receiver:
7. :The Learning ID Method
Canceling ID:
Short press “ID learning button” on the receiver, the running light
keeps on. Then press any key or touch circle on the PILOTctl3 touch panel,
the running light flicker several times, activated. .
Learning ID:
LED Lamp
Connection Socket
The Running Light
ID learning Button
DC5V~24V
Power Input Socket
Long press “ID learning button” on the receiver for 5s, the running
light flicker several times, canceled.
Input Voltage: AC100~240V
Output Signal: RF 2.4G + DMX512
RF Remote Distance: 30m
Remote Option: Sync Control
Input Voltage: DC5V~DC24V
Max Current Load: 6A × 3CH Max. 18A
Max Output Power: 90W/216W/432W(5V/12V/24V)
Working Temperature: -30 55
Package Size: L178×W48×H33(mm)
Weight(G.W.): 150g
1. Technical Specs:
Working Temperature: -20 ~ 60
Package Size: L113×W112×H50(mm)
Weight(G.W.): 225g
2. Product Size:
3. Installation Instruction:
4. Key Functions: 5. Terminals:
Long press to turn on/off the tone.
AC100-240V
Power Input Socket
DMX Signal
Output Socket
On/Off Touch Circle
Save Key
Long press to save
current static color or
changing effect.
Speed/
Brightness-
Speed/
Brightness+
Mode Key
The Changing Mode (Press to Switch):
A. Static Red B. Static Green C. Static Blue D. Static Yellow E. Static Purple
F. Static Cyan G. Static White H. RGB Skipping I. 7 Colors Skipping J . RGB Smooth
K. 7 Colors Smooth
2 1 3
PILOTctl-3 and TAPEDRIVER-WIFI4 user guide
www.contest-lighting.com
PILOTctl-3 and TAPEDRIVER-WIFI4 user guide PILOTctl-3 and TAPEDRIVER-WIFI4 user guide
PILOTctl-3
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
PILOTctl-3
PILOTctl-3 RGB touch panel
TAPEDRIVER-WIFI4 CV receiver
TAPEDRIVE-WIFI4
TAPEDRIVE-WIFI4
TAPEDRIVER-WIFI4
9. Connect to DMX Decoder ):Wiring Diagram 2 (
8. Wiring Diagram 1 ( Wireless Control ):
5 4 6 www.contest-lighting.com
PILOTctl-3 and TAPEDRIVER-WIFI4 user guide PILOTctl-3 and TAPEDRIVER-WIFI4 user guide
Because CONTEST® takes the utmost care in its products to
make sure you only get the best possible quality, our products
are subjects to modifications without prior notice. That is why
technical specifications and the products physical configuration
might differ from the illustrations.
Make sure you get the latest news and updates about the
CONTEST® products on www.contest-lighting.com
CONTEST® is a trademark of HITMUSIC S.A. - Zone Cahors
sud - 46230 FONTANES - FRANCE
PILOTctl-3 TAPEDRIVER-3 RGB LED strip
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
6. Operating Instruction for Receiver:
7. :The Learning ID Method
Canceling ID:
Short press “ID learning button” on the receiver, the running light
keeps on. Then press any key or touch circle on the PILOTctl4 touch panel,
the running light flicker several times, activated.
Lear ning ID:
Long press “ID learning button” on the receiver for 5s, the running
light flick er several times, canceled.
Input Voltage: 100~240V
Output Signal: RF 2.4G + DMX512
RF Remote Distance: 30m
Remote Option: Sync Control
AC
Max
Input Voltage: 5~24V
Max Current Load: 5A × 4CH Max. 20A
Max Output Power: 100W/240W/480W(5V/12V/24V)
Working Temperature: -30°C ~55°C
Package Size: L178×W48×H33(mm)
Weight(G.W.): 150g
DC
1. Technical Specs:
Working Temperature: -30°C ~55°C
Package Size: L113×W112×H50(mm)
Weight(G.W.): 225g
2. Product Size:
3. Installation Instruction:
4. Key Functions: 5. Terminals:
100-240V AC
Power Input Socket
DMX Signal
Output Socket
On/Off Touch Circle
Speed/
Brightnes s-
Speed/
Brightnes s+
Mode Key White Key
Press to turn on/ off
the white LEDs.
Long press to change
the brightnes s.
2
1 3
Long press to turn on/off the tone.
The Changing Mode (Press to Switch):
elpruP citatS .E wolleY citatS .D eulB citatS .C neerG citatS .B deR citatS .A
F. Static Cyan G. Static White H. RGB Skipping I. 7 Colors Skipping J . RGB Smooth
K. 7 Colors Smooth L. Static Black (only turn off RGB)
LED Lamp
Connection Socket
The Running Light
ID learning Button
5~24V DC
Power Input Socket
PILOTctl-4 and TAPEDRIVER-WIFI4 user guide
www.contest-lighting.com
PILOTctl-4 and TAPEDRIVER-WIFI4 user guide PILOTctl-4 and TAPEDRIVER-WIFI4 user guide
PILOTctl-4
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
PILOTctl-4
PILOTctl-4 RGBW touch panel
TAPEDRIVER-WIFI4 CV receiver
TAPEDRIVE-WIFI4
TAPEDRIVE-WIFI4
TAPEDRIVER-WIFI4
9. Connect to DMX Driver):Wiring Diagram 2 (
8. Wiring Diagram 1 ( Wireless Control ):
Could connect RGB/RGBW LEDs.
5 4 6 www.contest-lighting.com
PILOTctl-4 and TAPEDRIVER-WIFI4 user guide PILOTctl-4 and TAPEDRIVER-WIFI4 user guide
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
Because CONTEST® takes the utmost care in its products to
make sure you only get the best possible quality, our products
are subjects to modifications without prior notice. That is why
technical specifications and the products physical configuration
might differ from the illustrations.
Make sure you get the latest news and updates about the
CONTEST® products on www.contest-lighting.com
CONTEST® is a trademark of HITMUSIC S.A. - Zone Cahors
sud - 46230 FONTANES - FRANCE
PILOTctl-4 TAPEDRIVER-4 RGBW LED strip
— 2 —— 1 —
6. Operating Instruction for Receiver:
7. :The Learning ID Method
Canceling ID:
Short press “ID learning button” on the receiver, the running light
keeps on. Then press any zone No. on the touch panel,
the running
light flick er several times, activated. the receiver accept zone control.
Lear ning ID:
Attn: Multiple receivers could be synced to each zone.
— 3 —
Long press “ID learning button” on the receiver for 5s, the running
light flick er several times, canceled.
Input Voltage: 100~240V
Output Signal: RF 2.4G + DMX512
RF Remote Distance: 30m
Control Mode: 4 Zones Control
AC
Input Voltage: 5~24V
Max Current Load: 5A × 4CH Max. 20A
Max Output Power: 100W/240W/480W(5V/12V/24V)
Working Temperature: -30°C ~55°C
Package Size: L178×W48×H33(mm)
Weight(G.W.): 150g
DC
1. Technical Specs:
Working Temperature: -30°C ~55°C
Package Size: L113×W112×H50(mm)
Weight(G.W.): 225g
2. Product Size:
3. Installation Instruction:
4. Key Functions: 5. Terminals:
ON/OFF
Brightnes s/Speed
Touch Color Circle
R G B/W Color/ /
4 Zones
Selection Keys
Mode Key
Long press to turn on/off the buzzer.
Tables of Changing Mode:
4. Static Yellow
5. Static Purple
6. Static Cyan
7. Static White
8. RGB Jumping
9. 7 Colors Jumping
1. Static Red
2. Static Green
3. Static Blue
10. RGB Color Smooth
11. Full-color Smooth
CAV042-001
Power Input Socket
DMX Signal
Output Socket
(Short press to on/off)
(Long press to adjust color)
LED Lamp
Connection Socket
The Running Light
ID Learning Button
5~24V DC
Power Input Socket
Shor t pr ess: Turn on the zone
Long press: Tur n off t he zone
PILOTctl-16 and TAPEDRIVER-WIFI4 user guide
www.contest-lighting.com
PILOTctl-16 and TAPEDRIVER-WIFI4 user guide PILOTctl-16 and TAPEDRIVER-WIFI4 user guide
PILOTctl-16
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
PILOTctl-16
PILOTctl-16 RGBW touch panel
TAPEDRIVER-WIFI4 CV receiver
TAPEDRIVER-WIFI4
TAPEDRIVE-WIFI4
TAPEDRIVE-WIFI4
PILOTctl-16
— 5 —— 4 — — 6 —
9. Connect to DMX Decoder ):Wiring Diagram 2 (
8. Wiring Diagram 1 ( Wireless Control ):
Could connect RGB/RGBW LEDs.
Could connect RGB/RGBW LEDs.
www.contest-lighting.com
PILOTctl-16 and TAPEDRIVER-WIFI4 user guide PILOTctl-16 and TAPEDRIVER-WIFI4 user guide
Because CONTEST® takes the utmost care in its products to
make sure you only get the best possible quality, our products
are subjects to modifications without prior notice. That is why
technical specifications and the products physical configuration
might differ from the illustrations.
Make sure you get the latest news and updates about the
CONTEST® products on www.contest-lighting.com
CONTEST® is a trademark of HITMUSIC S.A. - Zone Cahors
sud - 46230 FONTANES - FRANCE
PILOTctl-16 TAPEDRIVER-4 RGBW LED strip
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
TAPEDRIVER-WIFI4
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Contest PILOTctl-16 User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contest MANU-6X User guide
-
-
-
-
-
-
-
-
-
Other documents
-
SKYDANCE DM-WT User manual
-
V TAC V-TAC 80133970 LED SYNC Controller User manual
-
ledyilighting T15 User manual
-
-
SKYDANCE SS-C User manual
-
Ltech EX1S User manual
-
SKYDANCE T15 User manual
-
DIODE LED ATTRIBUTE® Color Controller Installation guide
-
SKYDANCE SS-B User manual
-
SKYDANCE T14 User manual
