SKYDANCE SS-C User manual

SS-C
SKYDANCE
Brand
SKYDANCE
Model
SS-C
Type
User manual

SKYDANCE SS-C is a smart switch designed for standard wall junction boxes. It allows you to control your lights with a wireless remote or a traditional push switch. It supports single color LED lamps, incandescent, and halogen lights. It has a maximum output power of 720W. The device stands out with its easy installation and a wide range of compatible remotes. It also features an auto-transmitting function that extends the remote control distance.

SKYDANCE SS-C is a smart switch designed for standard wall junction boxes. It allows you to control your lights with a wireless remote or a traditional push switch. It supports single color LED lamps, incandescent, and halogen lights. It has a maximum output power of 720W. The device stands out with its easy installation and a wide range of compatible remotes. It also features an auto-transmitting function that extends the remote control distance.

Output current Max 3A
Input voltage AC100-240V
Output voltage AC100-240V
User Manual Ver 1.0.6
RF 2.4GHz + Push switch
30m(Barrier-free space)
Technical Parameters
Input and Output
Warranty
5 years
Warranty
Input signal
RF Control distance
Operation temperature
Case temperature (Max.)
Environment
IP rating IP20
Ta: -30
O
C ~ +55
O
C
T c: +65
O
C
Model No.: SS-C
RF AC Switch/Relay output/Max 3A/Push onoff/Wall junction box mounting
Features
Page 1
Mechanical Structures and Installations
LVD
● RF smart switch with relay output, without dimming function.
● To switch single color LED lamps, traditional incandescent
and halogen lights.
RF 2.4G dimming remote control● Compatibility with .
● Connect with external push switch optional.
● Easy to be placed in standard wall junction box behind a push switch.
SS-C RF Smart AC Switch & Push Switch
AC L input
AC N input
AC N output
AC L output
Match key
Wiring diagram
Push switch input 52.00 mm
52.00 mm
26.00 mm
Output power 300-720W
-+
Push -Key
Non-dimmable LED light
100-240VAC
Short press,turn on light.
Short press again,turn off light.
Note:
1.The upper Push-key input port can not connect any AC or DC power supply, otherwise, the product will
be damaged.
2. If output connect with capacitive or inductive load, the maximum output current only up to 3A.
If output connect with resistive load, the maximum output current may up to 10A.
-+
Push-Key
Push Switch (Optional)
RF Smart AC Switch & Push Switch
Typical Wall Junction Box Mounting
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certification CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
User Manual Ver 1.0.6 Page 2
SS-C RF Smart AC Switch & Push Switch
Match Remote Control (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Available RF remote
RU4 RU8 P F1-2
ON O F F
ON O F F
ON O F F
OF F
ON O F F
All
ON
All
1
2
3
4
12
43
56
87
OF F
All
ON
All
4 zone remote 8 zone remote 2 zone remote
Application notes
1. All the receivers in the same zone.
2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
Zone 1 Zone 2 Zone 3
RF remote
30m 30m
Zone 4
RF remote
Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,
as long as there is a receiver within 30m, the remote control distance can be extended.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled
by the same remote.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m.
30m
30m30m
Short press,turn on light.
Short press again,turn off light.
-+
Push-Key
Push Switch (Optional)
3. An additional AC relay or contactor is needed when total input current of the load (such as pump)
is higher than 3A or inrush current is greater than 30A.
Pump
Relay or
Contactor
  • Page 1 1
  • Page 2 2

SKYDANCE SS-C User manual

SS-C
SKYDANCE
Brand
SKYDANCE
Model
SS-C
Type
User manual

SKYDANCE SS-C is a smart switch designed for standard wall junction boxes. It allows you to control your lights with a wireless remote or a traditional push switch. It supports single color LED lamps, incandescent, and halogen lights. It has a maximum output power of 720W. The device stands out with its easy installation and a wide range of compatible remotes. It also features an auto-transmitting function that extends the remote control distance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents