Dahua ISC-D206 User manual

Brand: Dahua

Model: ISC-D206

Type: User manual

This manual is also suitable for

ISC-D218

Walk-through Metal Detector

User's Manual

V1.0.1

Foreword

General

This manual introduces the functions and operations of the walk-through metal detector

(hereinafter referred to as "the Device").

Models

ISC-D206, ISC-D218

Safety Instructions

Signal Words Meaning

Indicates a high potential hazard which, if not avoided, will

result in death or serious injury.

Indicates a medium or low potential hazard which, if not

avoided, could result in slight or moderate injury.

Indicates a potential risk which, if not avoided, could result in

property damage, data loss, lower performance, or

unpredictable result.

Provides methods to help you solve a problem or save you

time.

Provides additional information as the emphasis and

supplement to the text.

Revision History

Version Revision Content Release Time

V1.0.1

Updated "4.1.4 Adjust

Detection Ability" and "4.2.4

Adjust Detection Ability".

January 2021

V1.0.0 First release. January 2021

Interface Declaration

This manual mainly introduces the relevant functions when you use the Device. The interfaces used

for manufacture, returning to the factory for inspection, and locating fault are not described in this

manual. Please contact technical support if you need information about these interfaces.

About the Manual

● The manual is for reference only. If there is inconsistency between the manual and the actual

product, the actual product shall prevail.

● We are not liable for any loss caused by the operations that do not comply with the manual.

● The manual would be updated according to the latest laws and regulations of related

jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our official

website. If there is inconsistency between paper manual and the electronic version, the

electronic version shall prevail.

● All the designs and software are subject to change without prior written notice. The product

updates might cause some differences between the actual product and the manual. Please

contact the customer service for the latest program and supplementary documentation.

● There still might be deviation in technical data, functions and operations description, or errors in

print. If there is any doubt or dispute, we reserve the right of final explanation.

● Upgrade the reader software or try other mainstream reader software if the manual (in PDF

format) cannot be opened.

● All trademarks, registered trademarks and the company names in the manual are the properties

of their respective owners.

● Please visit our website, contact the supplier or customer service if there is any problem

occurring when using the device.

● If there is any uncertainty or controversy, we reserve the right of final explanation.

III

Important Safeguards and Warnings

This chapter describes the contents covering proper handling of the Device, hazard prevention, and

prevention of property damage. Read these contents carefully before using the Device, comply with

them when using, and keep the manual well for future reference.

Operation Requirements

● Do not place or install the Device in a place exposed to sunlight or near the heat source.

● Keep the Device away from dampness, dust or soot.

● Keep the Device installed horizontally on the stable place to prevent it from falling.

● Do not drop or splash liquid onto the Device, and make sure that there is no object filled with

liquid on the Device to prevent liquid from flowing into the Device.

● Install the Device in a well-ventilated place, and do not block the ventilation of the Device.

● Operate the Device within the rated range of power input and output.

● Do not disassemble the Device.

● Transport, use and store the Device under the allowed humidity and temperature conditions.

Electrical Safety

● Use the battery of specified manufacturer; otherwise there might result in explosion. When

replacing battery, make sure that the same type is used. Improper battery use might result in fire,

explosion, or inflammation.

● Always replace with the same type of batteries.

● Use the recommended power cables in the region and conform to the rated power specification.

● Use the power adapter provided with the Device; otherwise, it might result in people injury and

device damage.

● The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)

standard, and supply power with rated voltage which conforms to Limited power Source

requirement according to IEC60950-1. Please note that the power supply requirement is subject

to the device label.

● Connect the Device (I-type structure) to the power socket with protective earthing.

● The appliance coupler is a disconnection device. When using the coupler, keep the angle for easy

operation.

Table of Contents

Foreword ........................................................................................................................................................................................................I

Important Safeguards and Warnings ............................................................................................................................................ III

1 Overview ................................................................................................................................................................................................... 1

1.1 Introduction ................................................................................................................................................................................. 1

1.2 Detection Zones ......................................................................................................................................................................... 1

1.3 Technical Advantages ............................................................................................................................................................. 2

2 Structure ................................................................................................................................................................................................... 3

2.1 Dimensions ................................................................................................................................................................................... 3

2.2 Port ................................................................................................................................................................................................... 4

3 Installation ............................................................................................................................................................................................... 6

3.1 Checklist ......................................................................................................................................................................................... 6

3.2 Environment Requirements ................................................................................................................................................. 6

3.3 Installing Device ......................................................................................................................................................................... 7

3.4 Multiple Walk-through Detectors Site Installation ................................................................................................ 11

3.5 Stabilizing Device .................................................................................................................................................................... 11

4 Configuration ....................................................................................................................................................................................... 13

4.1 ISC-D206 ....................................................................................................................................................................................... 13

4.1.1 Configuration Panel .................................................................................................................................................... 13

4.1.2 Remote Controller ........................................................................................................................................................ 14

4.1.3 Device Operations ........................................................................................................................................................ 14

4.1.3.1 Function Description ........................................................................................................................................ 14

4.1.3.2 Password Setting ............................................................................................................................................... 15

4.1.3.2.1 Login .............................................................................................................................................................. 15

4.1.3.2.2 Changing Password ............................................................................................................................... 15

4.1.3.3 Setting Security Level ...................................................................................................................................... 16

4.1.3.4 Setting Sensitivity ............................................................................................................................................. 16

4.1.3.5 Setting Frequency ............................................................................................................................................. 17

4.1.3.6 Setting Infrared Start-stop ............................................................................................................................ 18

4.1.3.7 Setting Alarm ....................................................................................................................................................... 18

4.1.3.7.1 Setting Alarm Tone ................................................................................................................................ 18

4.1.3.7.2 Setting Alarm Volume .......................................................................................................................... 19

4.1.3.7.3 Setting Alarm Duration ........................................................................................................................ 19

4.1.4 Adjusting Detection Ability ..................................................................................................................................... 19

4.2 ISC-D218 ....................................................................................................................................................................................... 20

4.2.1 Configuration Panel .................................................................................................................................................... 20

4.2.2 Remote Controller ........................................................................................................................................................ 21

4.2.3 Device Operations ........................................................................................................................................................ 21

4.2.3.1 Function Description ........................................................................................................................................ 21

4.2.3.2 Password Setting ............................................................................................................................................... 22

4.2.3.2.1 Login .............................................................................................................................................................. 22

4.2.3.2.2 Changing Password ............................................................................................................................... 23

4.2.3.3 Setting Security Level ...................................................................................................................................... 23

4.2.3.4 Setting Sensitivity ............................................................................................................................................. 23

4.2.3.5 Setting Frequency ............................................................................................................................................. 24

4.2.3.6 Setting Infrared Start-stop ............................................................................................................................ 25

4.2.3.7 Setting Application Scenarios ..................................................................................................................... 25

4.2.3.8 Selecting Automatic Frequency Hopping ............................................................................................. 26

4.2.3.9 Managing Zone ................................................................................................................................................... 27

4.2.3.10 Setting Alarm .................................................................................................................................................... 27

4.2.3.10.1 Setting Alarm Tone.............................................................................................................................. 27

4.2.3.10.2 Setting Alarm Duration ..................................................................................................................... 27

4.2.3.10.3 Setting Alarm Volume ........................................................................................................................ 28

4.2.4 Adjusting Detection Ability ..................................................................................................................................... 28

5 FAQ ............................................................................................................................................................................................................ 29

Appendix 1 Cybersecurity Recommendations ........................................................................................................................ 31

1 Overview

1.1 Introduction

Walk-through metal detector is a high-performance security gate. The Device has high metal

detection sensitivity, light weight, strong anti-interference, and stable performance. It uses

high-strength special materials which are light-weighted and easy to transport and install. The

Device has a modular design and is manufactured on the unified assembly lines, so it can ensure the

good stability. It also delivers intuitive interface and simple use, so no operation training is required

to use it.

The Device can be widely used in sports meetings, conferences, schools and other occasions. It

adopts electromagnetic field to detect carry-on metal articles, and uses sound and light alarm to

indicate that the carry-on metal is more than a certain amount. It consists of a host, a high-frequency

signal generator, a signal receiver, and an infrared sensor, with a beautiful appearance, strong metal

detection capability, multiple detection zones, a unique Internet remote management system, and

light weight. It is currently a leading metal detection door in the market.

1.2 Detection Zones

Figure 1-1 Detection zones

Table 1-1 Detection zones description

No. Number of Zones

1 6-zone

2 12-zone

3 18-zone

For ISC-206, only 6-zone is available.

1.3 Technical Advantages

● Start-stop Technology

The IR units support manual start-stop technology for longer service life.

● Sensitivity Adjustable

The sensitivity of each detection zone can be adjusted as needed to meet different sensitivity

requirements of different zones.

● Alarm

Light and sound alarm for sharp alert. The sound duration and volume can be adjusted as

needed.

● Search

The system supports real-time search.

● Detection Capability

60 to 100 people detected per min.

● Filtering

Pre-define metal item weight, volume, size, part; exclude keys, jewelries, belt buckles and more.

● Security Protection

In line with EMC electromagnetic radiation standards and adopting weak magnetic field

technology, the Device is harmless to cardiac pacemaker wearers, pregnant women, floppy disks,

film, and videotapes.

2 Structure

2.1 Dimensions

Figure 2-1 ISC-D206 (unit: mm)

Figure 2-2 ISC-D218 (unit: mm)

2.2 Port

Figure 2-3 Port

Table 2-1 Port description

No. Name Description

1 Power input port Connects to power cable to get power supply.

2 Power supply switch Turn on or off the Device.

3 Installation

3.1 Checklist

After receiving the product, check against the table below. If there are any problems, contact the

after-sales service personnel.

Table 3-1 Checking list

No. List Description

1 Overall

packaging

Appearance Obvious damage

Packaging Accidental impact

Accessories ( see Table

3-2) Complete or not

2 Host

Appearance Obvious damage

Model Whether consistent with the order

contract

Table 3-2 Packing list

Name Quantity

Door panel 2

Host box 1

Beam 2

Power cable (host box to door panel) 1

Power cable (power input) 1

Fixing screws (door panel) 4

Fixing screws (host box) 2

Remote controller 1

Wrench 1

Quick start guide 1

3.2 Environment Requirements

● The ground is flat and sturdy

The ground should be flat and firmly supporting to prevent vibration. If there is a vibrating metal

structure under the ground, there can be unnecessary alarm when people passing through the

metal detection door.

● Keep away from fixed metal objects

Large metal objects that are fixed or immobile should be at least 50 cm away from the detection

door (detecting large metal objects) because they might make the Device more susceptible to

vibration.

The distance in this section is the recommended distance. The actual installation distance

depends on the installation site conditions.

● Keep away from moving metal objects

Large moving metal objects should be kept 0.5 m to 2 m away from the detection door to avoid

false alarms. Depending on the size of the metal object, the distance between the moving metal

object and the detection door might vary.

● Keep away from radioactive electronic interference

The distance between the electronic interference source and the receiving coil should be as large

as possible. The recommended minimum distance is 0.5 m to 4 m. However, the actual distance

needs to be based on specific circumstances. For example, you can go through a metal detector

door with a source of interference until the best position is found. Interference can occur from

electronic control panels, radios and computers, image displays, high-power motors and

transformers, AC wires, transistor control circuits, flash fluorescent tubes, arc welding equipment,

and more.

● Keep away from conductive electronic interference

Connect the power cable to a line that is not connected to other large loads, such as high-power

motors, because they can cause a large power or voltage shock in the line.

3.3 Installing Device

Step 1 Check whether the package is complete and open the box.

Figure 3-1 Open the box

Step 2 Take out the left and right door panels from the box.

Figure 3-2 Take out door panels

Step 3 Take out the accessories from the box.

Figure 3-3 Take out accessories

Step 4 Prepare the door panels, beams, host box, and screws.

Figure 3-4 Prepare the parts and tools

Step 5 Install the beams and the host box.

Figure 3-5 Install the beams and the host box

Step 6 Connect the detection wire on the host box to the left and right door panels, and then

connect the host box and the door panel with the power cable (host box to door panel).

Figure 3-6 Connect the detection wire

Step 7 Stand the Device up.

Figure 3-7 Stand the Device up

Step 8 Connect the power supply to the Device, and then turn on the power switch to start the

Device.

Figure 3-8 Stand the Device up

3.4 Multiple Walk-through Detectors Site Installation

When installing multiple devices, space the devices at least 50 cm, and also space the device and

X-ray larger than 50 cm. This recommended spacing can make the little metal objects (such as coin)

detected. If you install the devices with space smaller than 50 cm, there might be false alarm. If the

spacing needs to be shorten because the installation sites is limited, you need to adjust the

frequency, lower the security level and sensitivity according to the actual situation; otherwise, small

metal objects might not be detected.

Figure 3-9 Multiple walk-through detectors site installation

3.5 Stabilizing Device

To make the Device work normally, stabilize the Device before use.

Tighten the fixing screws.

Figure 3-10 Tighten the fixing screws

4 Configuration

4.1 ISC-D206

4.1.1 Configuration Panel

Figure 4-1 Configuration panel

Table 4-1 Configuration panel description

No. Name

1 Displays number of passes.

2 Displays alarm times.

Working indicator light. When metal is detected, the alarm light on the

door panel for the corresponding zone is on, and the indicator light grows

green from red.

4 Save and exit.

5 –

6 +

7 Program.

4.1.2 Remote Controller

You can set the parameters of the Device remotely through the remote controller. Install the

batteries before using the remote controller.

Figure 4-2 Remote controller

Table 4-2 Operation description

No. Name Description

1 Up/Down Changes the number or parameter value when setting a

parameter.

2 Program

● Go to the parameter setting interface.

● Confirm the password setting.

3 Back Returns to the previous menu or exits the menu setting

interface.

4.1.3 Device Operations

4.1.3.1 Function Description

Press to select a function, and press and to enter the value as needed.

Table 4-3 Function Description

Function Parameter Description

Setting password — Log in to the Device with the default password

(0000) and change the password regularly.

Setting security level H

The detection sensitivity of the whole

detector. It ranges from 1 to 20, and 12 by

default.

Setting sensitivity L1-L6 The detection sensitivity of each zone. It

ranges from 1 to 200, and 185 by default.

Page is loading ...

Dahua ISC-D206 User manual

Brand: Dahua

Model: ISC-D206

Type: User manual

This manual is also suitable for

ISC-D218

Download PDF

report

Dahua ISC-D206 User manual

This manual is also suitable for

Dahua ISC-D206 User manual

Related papers

Other documents