2. ROOMS TO GO
  3. 23181908

ROOMS TO GO 23181908 Assembly Instructions

  • Hello! I have reviewed the assembly instructions for the E819-04 End Table with Faux Marble Top. This document provides a detailed list of parts and step-by-step guide for assembling your end table using an allen wrench. You'll find information about assembly, and cleaning. I'm ready to answer your questions about this product and how to assemble it.
  • What is included in the box?
    How should I handle the components before assembly?
    How do I clean the surface?
1
ASSEMBLY INSTRUCTION
E819-04 END TABLE WITH FAUX MARBLE TOP
A
Wood Top
B
Upper Side Panel
C
Under Side Panel
1pc
1pc
D
Bolt
E
Bolt
F
Allen Wrench
1/4” x 1/2”
1/4” x 1-1/4”
1/4”
8pcs
1pc
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to
protect them from damage.
2
*** Do not tighten screws & bolts until the entire unit is completely assembled.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
1
Attach Upper Side Panel (B) to Wood Top (A) by Bolt (D) and Allen Wrench (F) as shown.
Attach Under Side Panel (C) to Wood Top (A) by Bolt (D) and Allen Wrench (F). Then attach
two side panels together by Bolt (E) and Allen Wrench (F) as shown.
2
A
/