Spectrum Industries 68103B Assembly Instructions

Spectrum Industries
Brand
Spectrum Industries
Model
68103B
Category
Rack accessories
Type
Assembly Instructions

This manual is also suitable for

(2) 044573
5/8" Adhesive Bumpers (4) 0100167
8-32 x 1/2" PH Thread-Ctg Screw
Locking Door for Instructor Media Console
Assembly Instructions:
Tools Required:
Phillips screwdriver
4mm hex wrench (included)
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
1. Attach Door to Equipment Rack
A. The locking door is symmetrical and can be mounted to swing from the left or right-side of the
equipment rack. Before you begin, determine which side the door will be attached.
B. With the hinge open, align the mounting holes as shown and attach to equipment rack frame with
(4) 8-32 x 1/2" PH thread ctg screws. Be sure the screws are installed straight.
Do not tighten completely until all screws are installed. Figure 1.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
#68103 - 29" Acrylic Door
#68153 - 36" Acrylic Door #68102 - 29" Solid Door
#68152 - 36" Solid Door
2. Install Bumpers
A. With the door open, install the (2) adhesive bumpers
onto the equipment rack frame as shown. Figure 2.
0109000X Page 1 of 1
(2) 044573
5/8" Adhesive Bumpers (4) 0100167
8-32 x 1/2" PH Thread-Ctg Screw
Locking Door for Instructor Media Console
Assembly Instructions:
Tools Required:
Phillips screwdriver
4mm hex wrench (included)
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
1. Attach Door to Equipment Rack
A. The locking door is symmetrical and can be mounted to swing from the left or right-side of the
equipment rack. Before you begin, determine which side the door will be attached.
B. With the hinge open, align the mounting holes as shown and attach to equipment rack frame with
(4) 8-32 x 1/2" PH thread ctg screws. Be sure the screws are installed straight.
Do not tighten completely until all screws are installed. Figure 1.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
#68103 - 29" Acrylic Door
#68153 - 36" Acrylic Door #68102 - 29" Solid Door
#68152 - 36" Solid Door
Figure 2
Adhesive Bumper
Adhesive
Bumper
Door
Figure 1
2. Install Bumpers
A. With the door open, install the (2) adhesive bumpers
onto the equipment rack frame as shown. Figure 2.
Door
Equipment Rack
8-32 x 1/2" PH
Thrd ctg screw
(4 req'd)
Equipment Rack
  • Page 1 1

Spectrum Industries 68103B Assembly Instructions

Spectrum Industries
Brand
Spectrum Industries
Model
68103B
Category
Rack accessories
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents