Qomo QPad 9RFStudent Quick start guide

Brand: Qomo

Model: QPad 9RFStudent

Type: Quick start guide

This manual is also suitable for

QPad 9RFInstructor

Introduction to the QRF900 audience response system

1. Remotes and Dongle

Load two “AA” batteries into the Instructor (F1-1a)

and Student (F1-1b) remotes. Turn on the Power on

the side of the remotes.

2. Start the Software

a. Install QClick software from the CD.

b. Double-click the icon on the desktop that will

open a *.ppt file to launch the QClick software.

c. Plug in the USB dongle (F1-1c) which should be

automatically recognized by QClick.

Note: The default username and password are

both qomo.

d. The QClick toolbar will appear and the username

will be displayed on the User section (F2-2a).

3. Prepare an Exam

a. Select a question type from the Add a Question

section (F3.1), and click a selection from the

option menu to add a template slide to the

presentation. Or add slides through PowerPoint

that will be recognized by QClick later on.

b. Click Show Details (F2-2b) on the Question

Setting section.

c. Set the question properties (F3.2) from the drop-

down menu about the Question Type, Question

Mode, Quiz Timer, and Points.

d. Type your question and answer choices in the

template. In the Question Detail section, click

Obtain (F3.3-3a) to recognize the content of the

slide, and display the information in the

textboxes.

e. Set the correct answer by clicking the check box

of answer options under Answers.

4. Class Set Up

a. Click Class (F2-2c) in the Tools section, to open

the class setting window.

b. Click the shortcut keys (F4-4a) in the Class

Setting window to add a class, edit a class, or

delete a class. Or, set up the class by clicking the

Class menu (F4-4b).

c. Click the shortcut keys (F4-4c) in the Class

Setting window to set up student profiles. Or, set

up student information by clicking on the Student

menu (F4-4d).

d. Click the Save button (F4-4e) to complete the

class settings, then exit (F4-4f) class setting

window.

5. Import a Class

a. Click the File button (F5.1-5a) and select Import

Class List from the option menu. Or simply click

the button (F5.1-5b) on the shortcut keys.

b. Find your Excel file with your class list and click

Open.

c. From the drop down menus above the mock

Excel sheet, select the correct title for your

imported columns.

d. Click the Import button (F5.2-5c).

Note: The class you import Excel must have

three columns of set information filled out:

Student ID, First Name, and Last Name.

6. Student Login

This process may also be completed after step 3. In

the student remote, go to menu and select Set

Student ID. (F6-6a) Change it into the Student ID

which can be found in the selected class. Click OK.

Select Login (F6-6d) from the Menu list and follow

the prompts until the (F6-6e) conﬁrmation screen.

7. Instructor Login

From the home screen, click the (F7-7a) Menu/OK

button to select Normal. Login (F7-7b) and then

press OK. When your (F7-7c) Class appears on the

screen; press OK to load your exam on the remote.

Then, your exam information will show on the

instructor remote screen (F7-7d).

8. Run a Quiz

a. Click the Start button (F2-2d) in the Tools section

to choose a quiz mode. A quiz setting window

will pop up.

Note: The QClick toolbar will appear and shows

“QRF900 Connected”. If the toolbar shows “No

Host”, re-plug the USB dongle.

b. Select a class from the drop-down list in the

setting window.

c. Click the check boxes of quiz settings to finish

the setup before you start the quiz.

d. Click Start (F8.1-8a) to run a quiz.

e. A (F8.2-8b) toolbar will appear on the top of the

screen from which you can operate your exam.

On the left side of the screen a (F8.2-8c) list of

student registration numbers will appear. On the

right side of the screen a (F8.2-8d) timer will

show the response time to the questions.

f. Start any question by clicking Start (F8.3-8e), and

end the timer by clicking Stop (F8.3-8e). Go

through the questions using the arrow keys.

g. You can add questions during the quiz session by

clicking Instant Questions (F8.3-8f). Select a

question mode from its option menu, then edit the

question in the popup window.

Qomo QPad 9RFStudent Quick start guide

This manual is also suitable for

Qomo QPad 9RFStudent Quick start guide

Related papers

Other documents