Elkron RA/209 Installation guide

Brand
Elkron
Model
RA/209
Type
Installation guide

Elkron RA/209 is an electronic liquid detector that provides ideal protection against flooding. It can be used to detect the presence of water in a variety of applications, such as basements, crawl spaces, and sump pumps. The RA/209 is easy to install and use, and it features a number of adjustable settings that allow you to customize it to your specific needs.

One of the key features of the RA/209 is its adjustable sensitivity. This allows you to set the detector to trigger an alarm at different water levels, depending on your needs. The RA/209 also features a number of different mounting options, so you can install it in a variety of locations.

Elkron RA/209 is an electronic liquid detector that provides ideal protection against flooding. It can be used to detect the presence of water in a variety of applications, such as basements, crawl spaces, and sump pumps. The RA/209 is easy to install and use, and it features a number of adjustable settings that allow you to customize it to your specific needs.

One of the key features of the RA/209 is its adjustable sensitivity. This allows you to set the detector to trigger an alarm at different water levels, depending on your needs. The RA/209 also features a number of different mounting options, so you can install it in a variety of locations.

Rivelatore di Liquidi
GENERALITÀ
Il rivelatore elettronico di presenza liquidi è ideale per la
protezione contro gli allagamenti d’acqua.
Qualora si desideri che il liquido raggiunga i 6 / 7 mm.
prima di essere rilevato, o nel caso la superficie d’appoggio
dei piedini sensibili sia particolarmente umida, si devono
interrompere le piste nei punti indicati n° 1 - n° 2.
Nell’eventualità invece che sia l’atmosfera intorno al
rivelatore a presentare un elevato tasso di umidità e che la
regolazione di sensibilità sia critica anche al minimo è
necessario interrompere le piste della serpentina sul
circuito stampato nei punti indicati n°3 - n°4.
TEST
I rivelatori prima di essere posti a magazzino hanno superato
il test di bruciatura, durante il quale sono sottoposti a vari
disturbi e prove di fatica previa condizione di alimentazione.
Schema Elettrico BaseDimensioni in millimetri
2
3
1
4
+
-
+
-
Linea di Rivelazione
Bilanciata per Centrali
Serie C/700 e C2/4
Alimentazione
27 V.dc.
Massima
Sensibilità
Ø 6
44
64
10
36
98
25
26
7
6
52
circuito
stampato
Serpentina
S S NC NA C- +
RA/209
5
CARATTERISTICHE TECNICHE
Tensione di funzionamento
Assorbimento medio
da 12 - 30 V.dc.
3,5 mA a 27 V.dc.
Assorbimento in Allarme L. R. 20 mA a 18 V.dc.
Temperatura di funzionamentoda -20 a +70 C°
.mm 52 .P ,46 .L ,89 .AinoisnemiD
DS80SD2B-001 LBT80283 IS7115-AA
ELKRON S.p.A.
Via Cimarosa, 39 – 10154 Torino (TO) – Italy
Tel. +39 (0)11.3986711 – Fax +39 (0)11.3986790
www.elkron.it - mail to: info@elkron.it
Liquid detectorGENERAL DESCRIPTION
The RA/209 electronic liquid detector provides ideal
protection against flooding.
If the detector is required to detect the presence of
water only after it has reached a depth of 6 / 7 mm,
or if it is being installed on a particularlydamp
surface, the tracks must be interrupted at points 1
and 2, as indicated.
Alternatively, if the detector is installed in an
extremely damp environment and it is critical to
adjust the sensitivity even at minimum levels, the
track of the coil on the printed circuit must be
interrupted at points 3 and 4 as shown.
TESTING
Before being made available for sale, our detectors undergo a
burnout test during which they are connected to the power
supply and subjected to various disturbances and endurance
tests.
TECHNICAL S P E C I F ICAT I O N S
Operating voltage 12- 30 V.dc.
Average consumption mains power 3.5 mA at 27 V.dc.
Consumption in alarm mode with red LED 20 mA at 18 V.dc.
°C 05 + -01-erutarepmet gnitarepO
Socket wiring diagramSize in millimetres
2
3
1
4
+
-
+
-
Detector
line
27 V.dc.
mains power
Maximum
sensitivity
Ø 6
44
64
10
36
98
25
26
7
6
52
Printed
circuit
Coil
S S NC NA C - +
5
RA/209
DS80SD2B-001 LBT80283 IS7115-AA
ELKRON S.p.A.
Via Cimarosa, 39 – 10154 Torino (TO) – Italy
Tel. +39 (0)11.3986711 – Fax +39 (0)11.3986790
www.elkron.it - mail to: info@elkron.it
  • Page 1 1
  • Page 2 2

Elkron RA/209 Installation guide

Brand
Elkron
Model
RA/209
Type
Installation guide

Elkron RA/209 is an electronic liquid detector that provides ideal protection against flooding. It can be used to detect the presence of water in a variety of applications, such as basements, crawl spaces, and sump pumps. The RA/209 is easy to install and use, and it features a number of adjustable settings that allow you to customize it to your specific needs.

One of the key features of the RA/209 is its adjustable sensitivity. This allows you to set the detector to trigger an alarm at different water levels, depending on your needs. The RA/209 also features a number of different mounting options, so you can install it in a variety of locations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents