Coats Kit 85608162 Inflation Cage Bracket Operating instructions

9024 Tire Changer

Bracket Kit 85608162

For use with COATS EL-X™ Express Lane

Inflation System

Hennessy Industries • 1601 J. P. Hennessy Drive, LaVergne, TN USA 37086-3565 (800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com

Instructions

Before beginning this modification or attempting

any maintenance, remove the electrical power and air

source from the machine; also, bleed off any stored

compressed air by exhausting through the air blast foot

valve.

1. Use two 3/8-16 x 4.5 inch bolts and two 3/8-16 nuts

to fasten cage bracket to machine tower, then secure.

2. Use two 3/8 x 2.5 inch U-bolts and four 3/8-16 nuts

to fasten cage bracket to inflation cage, then secure.

3. Refer to the Tire Inflation Cage Kit 85607770

instructions for its attachment and setup procedure.

4. Reconnect the air and electric supply to the

machine. Test the machine for full function before

returning the machine to operation.

Location of Tire Inflation Cage

Provide at least three feet of clear space between

the Tire Inflation Cage and building walls. When a tire

fails, the explosive release of air will throw all movable

objects in the path of the expanding compressed air.

Position Bracket And

Fasten To Machine

Cage Bracket Mounting Configuration

9024 Tire

Changer

Tire Inflation Cage

Kit 85607770

Bracket

Wall

Trajectory

Zone

Trajectory

Zone

3-feet

Cage Attached Three Feet From Wall