2. Renson
  3. Pyramid 2500

Renson Pyramid 2500 User manual

  • I'm a chat assistant and I have reviewed the provided instructions for the 2500 EA Series Slotvent. This document details the correct positioning and mounting procedures for the canopy and vent. It also specifies the slot size requirements and includes a step-by-step installation guide. I'm ready to answer your questions about the product and the details it contains.
  • What is the slot width R?
    What are the tolerances for slot height?
    How should the canopy and vent be positioned?
2500 EA Series Slotvent
Position vent Slot sizes
slot height H position X below
centerline
position Y above
centerline slot width R
13 mm* X = 3 mm Y = 2 mm
192 mm
(+0 / -1)
14 mm* X = 2 mm Y = 1 mm
15 mm* X = 1 mm Y = 1 mm
16 mm* X = centerline Y = centerline
* tolerances slot height (-0/+0.5)
Ensure Canopy & Vent are correctly positioned according to the instructions, to ensure the slot is not obstructed
in any way that will impede air flow.
If there are any questions regarding the fitting of this vent, please contact your local distributor.
➀ mill the routing as described
➁ open the plastic flaps, mount the
vent in closed position
➂ open the plastic flaps and mount
the canopy
➃ drill pilot hole and mount with
included screws
➄ close all 4 plastic flaps
➅ ready to use: open the vent!
X
Section
Vent
Canopy
03/18 L8000004
202
R
Position Canopy
Position Vent
Vent
Canopy
plastic flap
plastic flap
aluminium powdercoating
R
Defined by tool
Defined by tool
210
H
H
“Pilot hole” 2 mm
“Pilot hole” 2 mm
“Pilot hole” 2 mm
“Pilot hole” 2 mm
/