Primare I25 Prisma Quick start guide

Type
Quick start guide
CHOOSE A NETWORK
Settings
Wi-Fi
Your WiFi Network
WiFi
DefaultWiFi
ScandiWiFi09
Setup mode
1 device found
Primare I35C2A402
is ready for set up
Device setup
SET UP
Welcome home
Connecting to Primare I35...
Your phone or tablet may disconnect from Wi-Fi during setup
Primare I35 found
Would you like to set up this device?
Primare I35 found
Would you like to set up this device?
Primare I35 found
Would you like to set up this device?
Did you hear the sound?
This lets you know you´re connected to the right Primare I35
Where is the device?
Choose a location for your Primare I35. This will help name
and organize your devices.
My rooms
Backyard
I15 Terry
Create new
Attic
Backyard
Install your Primare Prisma product in your
system following the instructions in the user
guide, and turn your system on to begin the
setup process.
Enable Bluetooth and WiFi on your mobile
device. Connect the mobile device to the
network you want the Prisma device to use.
Download and open the Google Home app
on your mobile device. On the app’s home
page you will see a Device setup field for
any Prisma products to be setup.
Select the Prisma product you want to
configure by pressing Set Up. The display
of your Primare Prisma product will display
Configure network.
The Google Home app will automatically
connect your mobile device to your Primare
Prisma Product.
Once connected you will hear a test tone and see
the graphic above on your mobile device.
You then choose a location or name for the
device by either selecting a room name or by
using the “adding a custom room” function
at the bottom of the page.
The display of your Primare Prisma product will
display Setup mode.
01 03
05 080706
02 04
Primare Prisma
Chromecast built-in Quick Start Guide
The instructions below will allow you to quickly and easily set up your Primare Prisma
product to your WiFi network and mobile device in order to cast music or stream from
hundreds of services with Chromecast built-In.
Prisma product network name (SSID):
Chromecast built-in serial number:
Primare I35 foundConnected
Chromecast
Cast Button
Connecting to Wi-Fi
Choose the Wi-Fi network you would like to use with your
Primare I35
Testnet5
Telia5GHz-2612BD
Testnet2,4
dlink-2814-5Ghz
Other Wi-Fi network...
Primare I35 found
Would you like to set up this device?
Connecting to Wi-Fi
Primare I35 is now connecting to Testnet5
Primare I35 found
Would you like to set up this device?
Linking your Primare I35
Your Primare I35 uses your Google account to personalize
your experience
Select the WiFi network (WLAN) you wish to
connect to and push connect.
Note: if connecting by Ethernet cable (LAN),
this step will be skipped, with network
connection being made immediately.
It will take some time to connect to your
chosen WiFi network. During this time an
animated graphic will be in motion, indicating
that the process is underway.
Once you are connected to the WiFi network,
the graphic will assemble into a stable image.
At this stage you will have the opportunity
to link your Primare Prisma product to your
Google account, should you have one, to
personalize your experience.
Almost done! – Review what you have done
so far. And upon pressing next at the bottom
of the screen you should see that your device
is setup and ready.
The next steps will provide you with a tutorial
to show you how to use Chromecast or you
can press “Skip tutorial” to begin casting.
Should you have any questions or
require further information, please
contact us at [email protected]
Select a music streaming app or a song
from your mobile device, and press the
Chromecast icon to start streaming.
12
13 14 15
1109 10
The information provided in this document is intended for informational purposes only and is subject to change without notice. The process may vary with different devices and services.
  • Page 1 1
  • Page 2 2

Primare I25 Prisma Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI