Wacker Neuson PDI3A is a diaphragm pump designed for pumping dirty water, sludge, and other solids-laden liquids. It features a robust design with a cast iron casing and a nitrile rubber diaphragm for long-lasting performance in tough conditions. The PDI3A is self-priming up to 26 feet and can handle solids up to 1 inch in diameter. It is powered by a 6.5 HP Honda GX200 engine and has a maximum flow rate of 160 gallons per minute and a maximum head of 100 feet. With its portability and ease of use, the PDI3A is ideal for use in construction, mining, and other industrial applications.
Wacker Neuson PDI3A is a diaphragm pump designed for pumping dirty water, sludge, and other solids-laden liquids. It features a robust design with a cast iron casing and a nitrile rubber diaphragm for long-lasting performance in tough conditions. The PDI3A is self-priming up to 26 feet and can handle solids up to 1 inch in diameter. It is powered by a 6.5 HP Honda GX200 engine and has a maximum flow rate of 160 gallons per minute and a maximum head of 100 feet. With its portability and ease of use, the PDI3A is ideal for use in construction, mining, and other industrial applications.
Wacker Neuson PDI3A is a diaphragm pump designed for pumping dirty water, sludge, and other solids-laden liquids. It features a robust design with a cast iron casing and a nitrile rubber diaphragm for long-lasting performance in tough conditions. The PDI3A is self-priming up to 26 feet and can handle solids up to 1 inch in diameter. It is powered by a 6.5 HP Honda GX200 engine and has a maximum flow rate of 160 gallons per minute and a maximum head of 100 feet. With its portability and ease of use, the PDI3A is ideal for use in construction, mining, and other industrial applications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI