Audio Authority 1703-1 Installation guide

Brand
Audio Authority
Model
1703-1
Type
Installation guide
Installation Instructions
Model 1703-1 Demo Audio Player.
Installation
• Read these instructions and set the Play Mode switches for the desired demo behavior (see page 2).
• Attach the player to a fl at surface with the screws provided.
• Connect two push-buttons for track selection. Push buttons should be four-wire momentary switches, and can be
illuminated (2-5 volt LED).
• Connect 4-wire rotary control for volume control (Model1794).
• Connect power supply to AC power, then to the 1703-1 power port.
• For initial testing, connect audio output to headphones or other known audio device and test player for desired
functionality and timeout settings.
• Connect audio output(s) to the headphone amplifi er.
• Check our website for troubleshooting tips using the Status LED: audioauthority.com/product_details/1703.
ANALOG
OUTPUT 2
DIGITAL AUDIO
OUTPUT
CUSTOMER
INPUT
ANALOG
OUTPUT 1
12V DC
POWER
CONTROL
PORT
STATUS
PLAY MODE
1 2 3 4 5 6 7 8
MODEL 1703 DEMO AUDIO PLAYER
®
MEDIA CARD
SD
/HC/XC
701-16300D
PREV
NEXT
VOL 1 +VOL 1 –VOL 2 +VOL 2 –
VOLUME
KNOB 1
VOLUME
KNOB 2
ON
800-322-8346 • 859-233-4599 • www.audioauthority.com
AUDIO OUTPUT 1
AUDIO OUTPUT 2
STATUS LED
12V
POWER
INPUT
Model 1703-1
1 & 2-TIMEOUT SETTINGS
BUTTON 1 BUTTON 2
7-NOT USED
4-NOT USED
5-LOUDNESS
3-NOT USED
CUSTOMER INPUT
SD CARD
1794
ROTARY CONTROL
(VOLUME KNOB)
8-NOT USED
2-WIRE BUTTONS
4-WIRE BUTTONS
6-NOT USED
1703 TIPS
E-134 20161108
2048 Mercer Road, Lexington, KY 40511-1071 USA
800-322-8346 • 859-233-4599 • Fax: 859-233-4510
support@audioauthority.com • www.audioauthority.com
Button and Rotary Control Functions
Volume is controlled using a rotary control knob (PN 1794). To select Output 1 or Output 2 use the two 4-wire
push buttons.
TIMEOUT: When Switch 1 or 2 is on, the demo stops playing after a period of inactivity. The timeout interval is the
amount of time after the last button press or knob turn until the demo ends and attract mode begins. Adjust the
length of the timeout interval using the settings below. When Switch 3 and 4 are off, the demo never times out.
1 MINUTE TIMEOUT SWITCH SETTINGS:
1 2 3 4 5 6 7 8
OFF ON - - - - - -
2 MINUTE TIMEOUT SWITCH SETTINGS:
1 2 3 4 5 6 7 8
ON OFF - - - - - -
3 MINUTE TIMEOUT SWITCH SETTINGS:
1 2 3 4 5 6 7 8
ON ON - - - - - -
NEVER TIMEOUT SWITCH SETTINGS:
1 2 3 4 5 6 7 8
OFF OFF - - - - - -
LOUDNESS: A DSP preset boosts bass frequency at 300Hz by +5dB and the treble frequency at 7 kHz by +5dB.
Use to enhance audio when played at low volumes. Loudness (5) may be used with any other play modes.
LOUDNESS SWITCH SETTINGS:
1 2 3 4 5 6 7 8
- - - - ON - - -
Customer Input
The 1703-1 accepts input from any device, such as an MP3 player, with a 3.5mm analog output. The 1703-1
automatically detects the device and overrides the internal player.
1703 TIPS
  • Page 1 1
  • Page 2 2

Audio Authority 1703-1 Installation guide

Brand
Audio Authority
Model
1703-1
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers