ARISTA ARS-0002-A01 Quick start guide

ARISTA
Brand
ARISTA
Model
ARS-0002-A01
Category
Musical Equipment
Type
Quick start guide
• Compact design, easy to use, supports hot-plug.
• Easily and freely convert between analog audio signal and
Dante
TM
digital audio signal.
• Built-in 2 input or 2 output audio channels.
• Extends audio, control, Ethernet, and power over a single aordable network cable.
• Replaces multiple analog or multi-core cables with only a network cable, cost-eective, versatile.
• Extends uncompressed high-quality audio signal with near-zero latency.
• Audio signal transmission latency is adjustable(ARS-0002-A01).
• Transmits high quality 2-channel audio safely and reliably.
• Perfectly supports Dante software, the network and audio routing can be easily expanded and
recongured with just a few mouse clicks.
• PoE support, Line powering function compliant with IEEE802.3af.
• Built-in lightning & surge protection.
No. Connector Description
1 RJ-45/PoE LAN port For network connection, connect to network device.
2 DC 5V IN
5V DC power input
3/4 Audio out
Analog audio signal out to audio device(mixing console, speak-
er, headphone,amplier etc.)
5
Network bandwidth
indicator
Lights yellow: current network bandwidth >100Mbps
O:network bandwidth <10Mbps
6 Data transfer indicator
Lights green: No data transmission
Flashes green: data is transmitting
7 Power indicator Light red: Analog audio signal out
No. Connector Description
1 RJ-45/PoE LAN port For network connection, connect to network device.
2 DC 5V IN
5V DC power input
3/4 Audio IN Analog audio signal input to media device(PC,mixing console etc.)
5 Network speed indicator
Lights yellow: current network bandwidth >100Mbps
O:network bandwidth <10Mbps
6 Data transfer indicator
Lights green: No data transmission
Flashes green: data is transmitting
7 Signal in indicator Light red: Analog audio signal input
No. Connector Description
1 RJ-45/PoE LAN port For network connection, connect to network device.
2 DC 5V IN
5V DC power input
3/4 Audio out Analog audio signal out to audio device(speaker, headphone,amplier etc.)
5
Network bandwidth
indicator
Lights green: current network bandwidth >100Mbps
O:network bandwidth <10Mbps
6 Data transfer indicator
Lights green: No data transmission
Flashes green: data is transmitting
7 Latency up Press this button to raise latency
8 Latency down Press this button to lower latency
9 Latency dispaly Displays latency time
10 Signal out indicator Light red: Analog audio signal out
7
7
7
8
9
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
10
USB cable
USB cable
RJ45/PoE
LAN cable
RJ45/PoE
LAN cable
Line in
Line out
Line out
Line out
Line out
TIPS:
1. If you use a router with PoE support in the audio system, then USB power supply is not required.
2. Connect the Arista
In/Out Dante
TM
adapter
d
epending on your desired application.
Arista 2-Channel In/Out Dante
TM
adapters can be monitored and controlled by the Dante
TM
controller which
allows users to congure and route audio around Dante networks. Dante
TM
controller is a free software
application that enable user easily set up a Dante
TM
network. Within seconds of a Dante-enabled device
connecting to a network, Dante Controller will automatically discover and display the device, allowing you
to congure channels and route audio.
Follow the below steps to set up a Dante
TM
network for controlling.
1. Download and install the Dante Controller from Audinate website (www.audinate.com).
2. Connect the computer to the router using a standard network cable.
3. Launch the “Dante
TM
Controller” software.
4. In the routing menu, click the “+ / -” symbols for the devices to congure the audio routing.
Once set up and congured the audio routing between audio device, the audio device will remember and
save the settings, the computer and the “Dante
TM
Controller” software can be disconnected from the net-
work.
2
Product overview
1
Features
3
4
Connections
Extra Controls
USB Power supply
USB Power supply
+/- symbos
ARS-0200-A00
ARS-0002-A00
/ARS-0002-A01
PC
PC
ARS-0200-A00
ARS-0002-A00
ARS-0002-A01
1. Connection diagram for ARS-0002-A00 and ARS-0002-A01
(
Converting a Dante
TM
signal into an analog audio signal)
2. Connection diagram for ARS-0200-A00
(Converting an analog audio signal into a Dante
TM
signal)
Controlling the Dante
TM
adapters with the Dante
TM
controller
Quick Start Guide
2-Channel Analog In/Out Dante
TM
Adapter
Talk to us. We listen.
ARS-0002-A00
ARS-0002-A01
ARS-0200-A00
Router
Line in
Audio signal input source
(Dante
TM
mixing console etc.)
Audio signal input source
(Analog
mixing console etc.)
Audio out devices
(Speaker
etc.)
Audio out devices
(
Dante
TM
mixing console etc.)
Router
Limited Warranty
The Arista Corporation warrants the
Arista 2-Channel Analog I/O Dante
TM
adapter
to be free from defects in the
material and workmanship for 2 years from the date of purchase from the Arista Corporation or an authorized dealer.
Should this product fail to be in good working order within 2 years warranty period, The Arista Corp., at its option, repair
or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized
modications including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in
eect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the
unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no
circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied
warranty or tness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges
to and from the Arista Corporation. Cables are limited to a 30 day warranty and cable must be free from any markings,
scratches, and neatly coiled.
The content of this user guide has been carefully checked and is believed to be accurate.
However, The Arista Corporation assumes no responsibility for any inaccuracies that may be contained in this user guide.
The Arista Corporation will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting
from any defect or omission in this user guide, even if advised of the possibility of such damages. Also, the technical
information contained herein regarding the product features and specications is subject to change without further notice.
Model Name
ARS-0002-A00/ARS-0002-A01/ARS-0200-A00
Technical Information
Role of usage Arista 2-Channel Analog I/O Dante
TM
adapter
Channel 2 Inputs(ARS-0200-A00), 2 Outputs(ARS-0002-A00/A01)
Supported network speed 100/1000Mpbs Ethernet
Sampling rates 44.1/48/88.2/96kHz
Bit depth 16,24,32 bit
Latency Depending on the conguration on the device or network, 1 ms(default)
Ethernet connection 100BASE-TX(PoE support)
Input/Output impedance Input impedance:6.6 kOhm(ARS-0200-A00)
Output impedance <800 Ohm(ARS-0002-A00/A01)
Input/Output level(balanced) Input level: Max.22 dBu(ARS-0200-A00)
Output level:Max.16 dBu(ARS-0002-A00/A01)
Frequency response 20 Hz to 20 kHz(+/- 0.5dB)
Dynamic range > 100 dB
Signal-to-noise ratio > 100 dB
THD + noise < 0.01%(+ 4 dBu)
Crosstalk < -80dB(20 kHz)
Interfaces and Buttons
Button(only ARS-0002-A01) 1 x UP button, 1 x DOWN button (for adjusting transmission latency)
Output 2 x Analog audio out connectors
Power connector 1x Micro USB port
Mechanical Information
Weight 170g
Dimension 4.92 x 1.30 x 1.10 inch/ 125 x 33 x 28 mm (L x W x H)
Power supply 5V DC Power input
Power consumption 2 Watts
Operation temperature 0~50
O
C [32~122F]
Storage temperature -20~60
O
C [-4~140F]
Relative humidity 20~90% RH [no condensation]
6
Product Specications
© Copyright 2017
The information contained in this user guide and all accompanying documentation is copyrighted and all rights are
reserved. This publication may not, in whole or in part, be reproduced, transcribed, stored in a retrieval system, translated
into any language or computer language, or transmitted in any form whatsoever without the prior written consent from
the manufacturer, except for copies retained by the purchasers for their personal archival purposes. The manufacturer
reserves the right to revise this user guide and all accompanying documentation and to make changes in the content
without obligation to notify any person or organization of the revision or change.
IN NO EVENT WILL THE VENDOR BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THIS PRODUCT OR
DOCUMENTATION; EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE
VENDOR SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH
THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,OR RECOVERING SUCH HARDWARE,
SOFTWARE, OR DATA.
All trademarks mentioned in this document are acknowledged. The specications in this user guide are subject to change
without notice.
7
Product Safety Precautions
Read all of these instructions and save this user guide for later use. Follow all warnings and instructions on
the product.
• Relative humidity: 25%~80%, storage temperature: -20
o
C to 60
o
C(-4F to 140F), operation temperature:
0~50
o
C(32F to 122F)
• Do not install the unit near heat sources or an open fire. The unit environment should be well-
ventilated.
• Never immerse in water. Do not expose this product to strong sunlight, Do not place heavy objects on
the unit.
• If disruptions occur during operation:Immediately disconnect the Arista Dante
TM
adapter from audio
sources and/or audio sinks.
• Use only the power cord supplied with the unit. In the event that another power cord is used, one that is
dierent than the one provided by the supplier, make sure that it is certied by the local and applicable
national standards.
• If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair
service provider for a replacement.
• The power supply cord is used as the main disconnect device. Ensure that the socket outlet is easily
accessible after installation.
• Overloaded AC outlets, extension cords, frayed power cords, and broken plugs are extremely
dangerous. They may, and can, result in an electrical shock or re hazard. Call an authorized service
technician for any replacements.
• Hands must be dry when plugging the power cord into an AC outlet to prevent electrical shock. Do not
damage the power cord by disassembling, bending, pulling or exposing it to heat as it may cause a re
or electrical shock.
• Make sure to completely insert the power plug into an AC outlet. Insecure connections can cause a re.
• Ensure that the power source is grounded correctly.
• Unplug the Arista 2-Channel Analog I/O Dante
TM
adapter if cleaning is needed. The unit may be wiped
with a dry or slightly damp cloth when the power is o.
• Unplug the unit when not in use for an extended period of time.
• Consult a service technician if the Arista 2-Channel Analog I/O Dante
TM
adapter does not operate
normally when you have followed the instructions in this user guide.
• Do not attempt to repair this product yourself. Always get a qualied service technician to carry out
adjustments or repairs.
5
Troubleshooting
Before requesting service for the Arista 2-Channel analog In/Out Dante
TM
adapter , check the
following for a possible cause of the problem you are experiencing. Some simple checkups or
a minor adjustment on the adapter may eliminate the problem and restore to normal operation.
No power
• Insert the power plug properly into the power outlet.
• Check if the ON/OFF button on the audio device is set to “on”.
• Check if your router is with PoE support.
No signal on the unit
• Check if all the cables are connected correctly.Physically disconnect and reconnect the device.
• Check if your audio system is turned on.
• For software audio source, restart the audio application and play some audio in the audio application.
No Audio on the destination device
• Check that the device is actually routed to a destination audio device.
• Check that the destination is succesfully connected to Arista analog I/O adapter (as its audio input) .
• Check that the destination is capable of receiving and/or playing audio.
• Check that the volume level is not adjusted to low, turn up the volume.
The audio signal is distorted
• Check if the connectors are in good condition.
• Disable any Wi-Fi network connections.
• Check that any network switches in the system are coping with their trac.
• Faulty LAN cable, replace with a good one.
No network connection
• Check if all the connection cable on the LAN ports are connected properly.
• Check if the router connected to LAN port work in normal.
20190911_V 1.3
  • Page 1 1
  • Page 2 2

ARISTA ARS-0002-A01 Quick start guide

ARISTA
Brand
ARISTA
Model
ARS-0002-A01
Category
Musical Equipment
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents