Garmin GPSMAP® 8215, Volvo-Penta, U.S. Detailed Owner's manual

Category
Navigators
Type
Owner's manual
Owners
manual
VOLVO PENTA GLASS COCKPIT
© 2016–2017 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates
and supplemental information concerning the use of this product.
Garmin
®
, the Garmin logo, BlueChart
®
, g2 Vision
®
, GPSMAP
®
, FUSION
®
, Ultrascroll
®
, and VIRB
®
are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries.
Fantom
, FUSION-Link
, Garmin Helm
, Garmin LakeVü
, Garmin Nautix
, Garmin Quickdraw
, GCV
, GMR
, GRID
, GXM
, HomePort
, MotionScope
, Panoptix
, quatix
®
, Shadow
Drive
, and SmartMode
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
Volvo Penta
®
is a registered trademark of Volvo Trademark Holding AB.
iPod
®
is a trademark of Apple Inc., registered in the U.S. and other countries. Android
is a trademark of Google
Inc. CZone
is a trademark of Power Products, LLC. FLIR
®
is a registered
trademark of FLIR Systems, Inc. SiriusXM
®
is a registered trademark of SiriusXM Radio Inc. WiFi
®
is a registered mark of Wi-Fi Alliance Corporation. Windows
®
is a registered trademark of
Microsoft Corporation in the United States and other countries. All other trademarks and copyrights are the property of their respective owners.
Table of Contents
Introduction.....................................................................1
Device Overview......................................................................... 1
Using the Touchscreen.......................................................... 1
On-Screen Buttons................................................................ 1
Tips and Shortcuts................................................................. 1
Locking and Unlocking the Touchscreen............................... 1
Accessing Owner's Manuals on the Chartplotter........................ 1
Downloading the Manuals.......................................................... 1
Garmin Support Center...............................................................1
Inserting Memory Cards............................................................. 1
Software Update......................................................................... 2
Loading the New Software on a Memory Card...................... 2
Updating the Device Software............................................... 2
GPS Satellite Signals..................................................................2
Selecting the GPS Source..................................................... 2
Customizing the Chartplotter........................................ 2
Home Screen.............................................................................. 2
Adding an Item to Favorites................................................... 3
Customizing Pages..................................................................... 3
Customizing the Layout of a SmartMode or Combination
Page.......................................................................................3
Adding a SmartMode Layout................................................. 3
Adding a Custom Combination Screen.................................. 3
Customizing the Data Overlays............................................. 3
Linking a Layout to the Control and Joystick Buttons............ 3
Resetting the Station Layouts................................................ 3
Presets........................................................................................3
Saving a New Preset............................................................. 4
Managing Presets.................................................................. 4
Setting the Vessel Type.............................................................. 4
Adjusting the Backlight............................................................... 4
Adjusting the Color Mode........................................................... 4
Customizing the Startup Screen................................................. 4
Communication with Wireless Devices........................ 4
WiFi® Network.......................................................................... 4
Setting Up the WiFi Wireless Network.................................. 4
Connecting a Wireless Device to the Chartplotter................. 4
Changing the Wireless Channel............................................ 4
Changing the WiFi Host........................................................ 4
Wireless Remote Control............................................................ 4
Pairing the Wireless Remote Control With the
Chartplotter............................................................................ 4
Turning On and Off the Remote Backlight............................. 4
Disconnecting the Remote from All Chartplotters.................. 5
Using the Garmin Helm Application with the Chartplotter.......... 5
Wireless Wind Sensor................................................................ 5
Connecting a Wireless Sensor to the Chartplotter................. 5
Adjusting the Wind Sensor Orientation.................................. 5
Connecting a quatix® Watch to the Chartplotter........................ 5
Connecting a Garmin Nautix™ Device to the Chartplotter......... 5
Charts and 3D Chart Views........................................... 5
Navigation Chart and Offshore Fishing Chart............................. 6
Zooming In and Out Using the Touchscreen......................... 6
Chart Symbols....................................................................... 6
Measuring a Distance on the Chart....................................... 6
Creating a Waypoint on the Chart..........................................6
Viewing Location and Object Information on a Chart............ 6
Viewing Details about Navaids.............................................. 6
Navigating to a Point on the Chart......................................... 6
Premium Charts.......................................................................... 7
Viewing Tide Station Information........................................... 7
Animated Tide and Current Indicators.............................. 7
Showing Tides and Current Indicators.............................. 7
Showing Satellite Imagery on the Navigation Chart
.............. 7
Viewing Aerial Photos of Landmarks..................................... 7
Selecting a Map..................................................................... 7
Automatic Identification System..................................................8
AIS Targeting Symbols.......................................................... 8
Heading and Projected Course of Activated AIS Targets...... 8
Showing AIS and MARPA Vessels on a Chart or on a 3D
Chart View............................................................................. 8
Activating a Target for an AIS Vessel.................................... 8
Viewing Information about a Targeted AIS Vessel........... 8
Deactivating a Target for an AIS Vessel........................... 8
Viewing a List of AIS and MARPA Threats............................ 8
Setting the Safe-Zone Collision Alarm................................... 8
AIS Distress Signals.............................................................. 9
Navigating to a Distress Signal Transmission................... 9
AIS Distress Signal Device Targeting Symbols................ 9
Enabling AIS Transmission Test Alerts............................. 9
Turning Off AIS Reception..................................................... 9
Chart and 3D Chart View Settings.............................................. 9
Waypoints and Tracks Settings on the Charts and Chart
Views..................................................................................... 9
Chart Appearance Settings.................................................... 9
Navigation and Fishing Chart Setup.................................... 10
Other Vessels Settings on the Charts and Chart Views...... 10
Laylines Settings.................................................................. 10
Fish Eye 3D Settings........................................................... 10
Garmin Quickdraw Contours Mapping....................... 10
Mapping a Body of Water Using the Garmin Quickdraw
Contours Feature...................................................................... 11
Adding a Label to a Garmin Quickdraw Contours Map............ 11
Garmin Quickdraw Community................................................. 11
Accessing the Garmin Quickdraw Community.....................11
Sharing Your Garmin Quickdraw Contours Maps with the
Garmin Quickdraw Community............................................ 11
Downloading Garmin Quickdraw Community Maps............ 11
Garmin Quickdraw Contours Settings...................................... 11
Navigation with a Chartplotter.................................... 12
Basic Navigation Questions...................................................... 12
Destinations.............................................................................. 12
Searching for a Destination by Name.................................. 12
Selecting a Destination Using the Navigation Chart............ 12
Searching for a Marine Services Destination....................... 12
Searching for a Volvo Penta Dealer.................................... 12
Stopping Navigation............................................................. 12
Waypoints................................................................................. 13
Marking Your Present Location as a Waypoint.................... 13
Creating a Waypoint at a Different Location........................ 13
Marking an SOS Location.................................................... 13
Viewing a List of all Waypoints............................................ 13
Editing a Saved Waypoint.................................................... 13
Moving a Saved Waypoint................................................... 13
Browsing for and Navigating to a Saved Waypoint.............. 13
Deleting a Waypoint or an MOB.......................................... 13
Deleting All Waypoints......................................................... 13
Setting and Following a Direct Course Using Go To........... 13
Routes...................................................................................... 13
Creating and Navigating a Route From Your Present
Location............................................................................... 13
Creating and Saving a Route............................................... 14
Viewing a List of Routes and Auto Guidance Paths............ 14
Editing a Saved Route......................................................... 14
Browsing for and Navigating a Saved Route....................... 14
Browsing for and Navigating Parallel to a Saved Route...... 14
Deleting a Saved Route....................................................... 14
Deleting All Saved Routes................................................... 14
Auto Guidance.......................................................................... 14
Table of Contents i
Setting and Following an Auto Guidance Path.................... 15
Creating and Saving an Auto Guidance Path...................... 15
Adjusting a Saved Auto Guidance Path............................... 15
Canceling an Auto Guidance Calculation in Progress......... 15
Setting a Timed Arrival.........................................................15
Auto Guidance Path Configurations.................................... 15
Adjusting the Distance from Shore..................................15
Tracks....................................................................................... 16
Showing Tracks................................................................... 16
Setting the Color of the Active Track................................... 16
Saving the Active Track....................................................... 16
Viewing a List of Saved Tracks............................................ 16
Editing a Saved Track.......................................................... 16
Saving a Track as a Route...................................................16
Browsing for and Navigating a Recorded Track.................. 16
Deleting a Saved Track........................................................16
Deleting All Saved Tracks.................................................... 16
Retracing the Active Track................................................... 16
Clearing the Active Track..................................................... 16
Managing the Track Log Memory During Recording........... 16
Configuring the Recording Interval of the Track Log........... 16
Boundaries................................................................................16
Creating a Boundary............................................................ 17
Converting a Route to a Boundary...................................... 17
Converting a Track to a Boundary....................................... 17
Editing a Boundary...............................................................17
Setting a Boundary Alarm.................................................... 17
Deleting a Boundary............................................................ 17
Synchronizing User Data Across the Garmin Marine
Network.....................................................................................17
Deleting All Saved Waypoints, Routes, and Tracks................. 17
Sailing Features............................................................ 17
Setting the Vessel Type............................................................ 17
Sail Racing................................................................................17
Starting Line Guidance........................................................ 17
Setting the Starting Line.................................................. 17
Using the Starting Line Guidance................................... 17
Starting the Race Timer....................................................... 18
Stopping the Race Timer..................................................... 18
Setting the Distance between the Bow and the GPS
Antenna
................................................................................18
Laylines Settings.......................................................................18
Setting the Keel Offset.............................................................. 18
Heading Line and Angle Markers............................................. 18
Setting the Heading and Course Over Ground Lines.......... 18
Turning on Angle Markers....................................................18
Sonar Fishfinder........................................................... 18
Stopping the Transmission of Sonar Signals............................ 19
Changing the Sonar View......................................................... 19
Traditional Sonar View..............................................................19
Split-Frequency Sonar View................................................ 19
Split-Zoom Sonar View........................................................ 19
Garmin ClearVü Sonar View.....................................................19
SideVü Sonar View................................................................... 19
SideVü Scanning Technology.............................................. 19
Measuring Distance on the Sonar Screen........................... 20
Panoptix Sonar Views...............................................................20
LiveVü Down Sonar View.................................................... 20
LiveVü Forward Sonar View................................................ 20
RealVü 3D Forward Sonar View.......................................... 20
RealVü 3D Down Sonar View.............................................. 20
RealVü 3D Historical Sonar View........................................ 20
FrontVü Sonar View............................................................. 21
Selecting the Transducer Type................................................. 21
Calibrating the Compass......................................................21
Creating a Waypoint on the Sonar Screen............................... 21
Pausing the Sonar Display
....................................................... 21
Viewing Sonar History.............................................................. 21
Sonar Sharing........................................................................... 21
Selecting a Sonar Source.................................................... 21
Renaming a Sonar Source...................................................21
Adjusting the Level of Detail..................................................... 21
Adjusting the Color Intensity..................................................... 22
Sonar Recordings..................................................................... 22
Recording the Sonar Display............................................... 22
Stopping the Sonar Recording............................................. 22
Deleting a Sonar Recording................................................. 22
Playing Sonar Recordings................................................... 22
Traditional, Garmin ClearVü, and SideVü Sonar Setup........... 22
Setting the Zoom Level on the Sonar Screen...................... 22
Setting the Scroll Speed...................................................... 22
Adjusting the Range of the Depth or Width Scale............... 23
Sonar Noise Rejection Settings........................................... 23
Sonar Appearance Settings................................................. 23
Sonar Alarms....................................................................... 23
Advanced Sonar Settings.................................................... 23
Traditional, Garmin ClearVü, and SideVü Transducer
Installation Settings
.............................................................. 24
Sonar Frequencies...............................................................24
Selecting Frequencies.....................................................24
Creating a Frequency Preset.......................................... 24
Turning On the A-Scope...................................................... 24
Panoptix Sonar Setup............................................................... 25
Adjusting the RealVü Viewing Angle and Zoom Level......... 25
Adjusting the RealVü Sweep Speed.................................... 25
LiveVü Forward and FrontVü Sonar Menu.......................... 25
Setting the LiveVü Transducer Transmit Angle.............. 25
Setting the FrontVü Depth Alarm.................................... 25
LiveVü and FrontVü Appearance Settings........................... 25
RealVü Appearance Settings............................................... 25
Panoptix Transducer Installation Settings........................... 26
Setting the Bow Offset.................................................... 26
Radar............................................................................. 26
Radar Interpretation.................................................................. 26
Radar Overlay...................................................................... 26
Radar Overlay and Chart Data Alignment........................... 26
Transmitting Radar Signals...................................................... 27
Stopping the Transmission of Radar Signals....................... 27
Setting Up the Timed Transmit Mode.................................. 27
Enabling and Adjusting a Radar No Transmit Zone............ 27
Adjusting the Radar Range...................................................... 27
Tips for Selecting a Radar Range........................................ 27
Zooming In and Out of the Radar Screen................................. 27
Marking a Waypoint on the Radar Screen................................ 27
MotionScope™ Doppler Radar Technology............................. 27
Enabling a Guard Zone............................................................ 27
Defining a Circular Guard Zone........................................... 28
Defining a Partial Guard Zone............................................. 28
Disabling a Guard Zone....................................................... 28
MARPA..................................................................................... 28
MARPA Targeting Symbols................................................. 28
Assigning a MARPA Tag to an Object................................. 28
Removing a MARPA Tag from a Targeted Object............... 28
Viewing Information about a MARPA-tagged Object........... 28
Viewing a List of AIS and MARPA Threats.......................... 28
Showing AIS Vessels on the Radar Screen........................ 28
VRM and EBL...................................................................... 28
Showing the VRM and the EBL...................................... 29
Adjusting the VRM and the EBL..................................... 29
Measuring the Range and Bearing to a Target Object... 29
Echo Trails................................................................................ 29
Turning on Echo Trails......................................................... 29
ii Table of Contents
Adjusting the Length of the Echo Trails............................... 29
Clearing the Echo Trails.......................................................29
Optimizing the Radar Display................................................... 29
Radar Gain and Clutter........................................................ 29
Adjusting Gain on the Radar Screen Automatically........ 29
Adjusting Gain on the Radar Screen Manually............... 29
Minimizing Nearby Large-Object Interference.................29
Minimizing Side-Lobe Interference on the Radar
Screen............................................................................. 29
Adjusting Sea Clutter on the Radar Screen
Automatically................................................................... 30
Adjusting Sea Clutter on the Radar Screen Manually..... 30
Adjusting Rain Clutter on the Radar Screen................... 30
Reducing Cross Talk Clutter on the Radar Screen......... 30
Radar Options Menu............................................................ 30
Radar Setup Menu............................................................... 30
Radar Appearance Settings................................................. 30
Radar Installation Settings................................................... 31
Front-of-Boat Offset........................................................ 31
Setting a Custom Park Position...................................... 31
Selecting a Different Radar Source.......................................... 31
Changing the Radar Mode....................................................... 31
Autopilot........................................................................ 31
Autopilot Configuration and Commissioning............................. 31
Opening the Autopilot Screen................................................... 31
Autopilot Screen....................................................................... 31
Adjusting the Step Steering Increment................................ 31
Setting the Power Saver...................................................... 31
Enabling Shadow Drive™.................................................... 32
Engaging the Autopilot............................................................. 32
Adjusting the Heading with the Helm................................... 32
Adjusting the Heading with the Chartplotter in Step Steering
Mode.................................................................................... 32
Steering Patterns...................................................................... 32
Following the U-Turn Pattern............................................... 32
Setting Up and Following the Circles Pattern...................... 32
Setting Up and Following the Zigzag Pattern...................... 32
Following the Williamson Turn Pattern................................ 32
Following an Orbit Pattern................................................... 32
Setting Up and Following the Cloverleaf Pattern................. 32
Setting Up and Following a Search Pattern......................... 32
Cancelling a Steering Pattern.............................................. 32
Digital Selective Calling............................................... 32
Networked Chartplotter and VHF Radio Functionality.............. 32
Turning On DSC....................................................................... 33
DSC List....................................................................................33
Viewing the DSC List........................................................... 33
Adding a DSC Contact......................................................... 33
Incoming Distress Calls............................................................ 33
Navigating to a Vessel in Distress....................................... 33
Man-Overboard Distress Calls Initiated from a VHF
Radio....................................................................................33
Man-Overboard and SOS Distress Calls Initiated from the
Chartplotter
.......................................................................... 33
Position Tracking...................................................................... 33
Viewing a Position Report.................................................... 33
Navigating to a Tracked Vessel........................................... 33
Creating a Waypoint at the Position of a Tracked Vessel.... 33
Editing Information in a Position Report.............................. 33
Deleting a Position-Report Call............................................ 33
Viewing Vessel Trails on the Chart...................................... 33
Individual Routine Calls............................................................ 34
Selecting a DSC Channel.................................................... 34
Making an Individual Routine Call....................................... 34
Making an Individual Routine Call to an AIS Target............ 34
Gauges and Graphs..................................................... 34
Viewing the Gauges..................................................................34
Changing the Data Shown in a Gauge................................ 34
Customizing the Gauges......................................................34
Customizing Engine Gauge and Fuel Gauge Limits............ 34
Setting the Fuel Alarm.............................................................. 34
Viewing Graphs........................................................................ 34
Setting the Graph Range and Time Scales......................... 34
Tide, Current, and Celestial Information.................... 34
Tide Station Information............................................................34
Current Station Information.......................................................35
Celestial Information................................................................. 35
Viewing Tide Station, Current Station, or Celestial Information
for a Different Date................................................................... 35
Viewing Information for a Different Tide or Current Station...... 35
Viewing Almanac Information from the Navigation Chart......... 35
Warning Manager......................................................... 35
Viewing Messages.................................................................... 35
Sorting and Filtering Messages................................................ 35
Saving Messages to a Memory Card........................................35
Clearing all of the Messages.................................................... 35
Media Player................................................................. 35
Opening the Media Player........................................................ 35
Icons.................................................................................... 35
Selecting the Media Source...................................................... 35
Playing Music............................................................................35
Browsing for Music...............................................................35
Enabling Alphabetical Search......................................... 35
Setting a Song to Repeat..................................................... 35
Setting All Songs to Repeat................................................. 35
Setting Songs to Shuffle...................................................... 36
Adjusting the Volume................................................................ 36
Muting the Media Volume.................................................... 36
Enabling and Disabling Zones............................................. 36
VHF Radio................................................................................ 36
Scanning VHF Channels......................................................36
Adjusting the VHF Squelch.................................................. 36
Radio........................................................................................ 36
Setting the Tuner Region..................................................... 36
Changing the Radio Station................................................. 36
Changing the Tuning Mode................................................. 36
Presets................................................................................. 36
Saving a Station as a Preset........................................... 36
Selecting a Preset........................................................... 36
Removing a Preset..........................................................36
DAB Playback........................................................................... 36
Setting the DAB Tuner Region............................................ 36
Scanning for DAB Stations.................................................. 36
Changing DAB Stations....................................................... 36
Selecting a DAB Station from a List................................ 36
Selecting a DAB Station from a Category....................... 36
DAB Presets........................................................................ 37
Saving a DAB Station as a Preset.................................. 37
Selecting a DAB Preset from a List................................. 37
Removing DAB Presets.................................................. 37
SiriusXM Satellite Radio........................................................... 37
Locating a SiriusXM Radio ID.............................................. 37
Activating a SiriusXM Subscription...................................... 37
Customizing the Channel Guide.......................................... 37
Saving a SiriusXM Channel to the Presets List................... 37
Unlocking SiriusXM Parental Controls................................. 37
Setting Parental Controls on SiriusXM Radio
Channels......................................................................... 37
Changing a Parental Passcode on a SiriusXM Radio..... 37
Restoring Default Parental Control Settings Values....... 37
Table of Contents iii
Clearing All Locked Channels on a SiriusXM Radio....... 37
Setting the Device Name.......................................................... 37
Updating the Media Player Software........................................ 37
SiriusXM Weather......................................................... 38
SiriusXM Equipment and Subscription Requirements.............. 38
Weather Data Broadcasts.........................................................38
Changing the Weather Chart.................................................... 38
Viewing Precipitation Information............................................. 38
Precipitation Views...............................................................38
Storm Cell and Lightning Information....................................... 38
Hurricane Information............................................................... 38
Weather Warnings and Weather Bulletins................................ 38
Forecast Information................................................................. 38
Viewing Forecast Information for Another Time Period....... 38
Weather Fronts and Pressure Centers................................ 39
Viewing a Marine Forecast or an Offshore Forecast........... 39
City Forecasts...................................................................... 39
Viewing Sea Conditions............................................................ 39
Surface Winds......................................................................39
Wave Height, Wave Period, and Wave Direction................ 39
Viewing Forecast Sea Conditions Information for Another
Time Period..........................................................................39
Viewing Fishing Information......................................................39
Surface Pressure and Water Temperature Data................. 39
Forecasting Fish Locations.................................................. 39
Changing the Sea Surface Temperature Color Range........ 39
Visibility Information.................................................................. 40
Viewing Forecast Visibility Information for Another Time
Period...................................................................................40
Viewing Buoy Reports.............................................................. 40
Viewing Local Weather Information near a Buoy................. 40
Creating a Waypoint on a Weather Chart................................. 40
Weather Overlay....................................................................... 40
Turning On the Weather Overlay on a Chart....................... 40
Weather Overlay Settings on the Navigation Chart............. 40
Weather Overlay Settings on the Fishing Chart.................. 40
Viewing Weather Subscription Information............................... 40
Viewing Video............................................................... 40
Selecting a Video Source......................................................... 40
Alternating Among Multiple Video Sources......................... 40
Networked Video Devices.........................................................40
Using Video Presets on Networked Video Cameras........... 41
Saving Video Presets on a Networked Video Camera... 41
Naming Video Presets on a Networked Video Camera.. 41
Activating Video Presets on a Networked Video
Camera........................................................................... 41
Camera Settings.................................................................. 41
Video Settings...................................................................... 41
Associating the Camera to a Video Source......................... 41
Video Camera Movement Control........................................41
Controlling Video Cameras Using On-Screen Controls.. 41
Controlling a Video Camera Using Gestures.................. 41
Creating a Combination with Video Functions.......................... 41
Configuring the Video Appearance........................................... 42
Configuring the PC Display.......................................................42
Exiting PC Display Mode..................................................... 42
Controlling the VIRB® Action Camera with the Chartplotter.... 42
VIRB Action Camera Settings.............................................. 42
VIRB Action Camera Video Setup Settings......................... 42
Adding the VIRB Action Camera Controls to Other
Screens................................................................................ 42
Controlling the VIRB Action Camera Video Playback.......... 42
Deleting a VIRB Video.................................................... 42
Starting a VIRB Video Slideshow........................................ 43
Sharing and Managing User Data............................... 43
Copying Waypoints, Routes, and Tracks from HomePort to a
Chartplotter............................................................................... 43
Selecting a File Type for Third-Party Waypoints and Routes... 43
Copying Data from a Memory Card.......................................... 43
Copying Waypoints, Routes, and Tracks to a Memory Card.... 43
Copying Built-In Maps to a Memory Card................................. 43
Backing Up Data to a Computer............................................... 43
Restoring Backup Data to a Chartplotter.................................. 43
Saving System Information to a Memory Card......................... 43
Device Configuration................................................... 43
Turning On the Chartplotter Automatically............................... 43
System Settings........................................................................ 43
Sounds and Display Settings............................................... 43
GPS Settings....................................................................... 44
Station Settings.................................................................... 44
Viewing System Software Information................................. 44
Viewing the Event Log.................................................... 44
Preferences Settings................................................................ 44
Units Settings....................................................................... 44
Navigation Settings.............................................................. 44
Auto Guidance Path Configurations................................ 44
Adjusting the Distance from Shore..................................45
Communications Settings......................................................... 45
NMEA 0183 Settings............................................................45
Configuring NMEA 0183 Output Sentences................... 45
Setting the Communication Format for Each NMEA 0183
Port
..................................................................................45
NMEA 2000 Settings............................................................45
Naming Devices and Sensors on the Network............... 46
Marine Network.................................................................... 46
EVC Network....................................................................... 46
Setting Alarms.......................................................................... 46
Navigation Alarms................................................................ 46
Setting the Anchor Drag Alarm....................................... 46
System Alarms..................................................................... 46
Sonar Alarms....................................................................... 46
Setting Weather Alarms....................................................... 46
Setting the Fuel Alarm......................................................... 46
My Vessel Settings................................................................... 46
Setting the Keel Offset......................................................... 47
Setting the Water Temperature Offset................................. 47
Calibrating a Water Speed Device....................................... 47
Adding a Key........................................................................47
Setting the Speed Factor..................................................... 47
Fuel Tank Settings............................................................... 47
Other Vessels Settings............................................................. 47
Settings that are Synced on the Garmin Marine Network........ 47
Restoring the Original Chartplotter Factory Settings................ 48
Appendix....................................................................... 48
Registering Your Device........................................................... 48
Digital Switching....................................................................... 48
Pairing the GRID Remote Input Device with the Chartplotter... 48
Pairing the GRID Device with the Chartplotter from the
Chartplotter.......................................................................... 48
Pairing the GRID Device with the Chartplotter from the GRID
Device.................................................................................. 48
Rotating the GRID Joystick.................................................. 48
Cleaning the Screen................................................................. 49
Viewing Images on a Memory card.......................................... 49
Screenshots.............................................................................. 49
Capturing Screenshots........................................................ 49
Copying Screenshots to a Computer................................... 49
Troubleshooting........................................................................ 49
My device will not acquire GPS signals............................... 49
My device will not turn on or keeps turning off..................... 49
iv Table of Contents
My device is not creating waypoints in the correct
location.................................................................................49
Contacting Garmin Support...................................................... 49
Specifications............................................................................50
NMEA 2000 PGN Information.............................................. 50
NMEA 0183 Information.......................................................50
Engine Information Transmitted over the NMEA 2000
Bridge...................................................................................50
Index.............................................................................. 52
Table of Contents v
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
After more than 100 years in the maritime industry, the name
Volvo Penta
®
has come to symbolize reliability, technical
innovation, first-class performance, and long life. We believe
that these qualities correspond well to the demands and
expectations you have of your Volvo Penta product.
The Volvo Penta Glass Cockpit, designed in a collaboration
between Volvo Penta and Garmin
®
, has a new user interface
that includes instrumentation for navigation and communications
equipment. The monitors are fully integrated with Volvo Penta
drive systems and other instruments.
In order for you to enjoy everything you would expect from the
product, we ask that you read through the instruction manual
carefully and take note of our advice on boat operations and
maintenance before you make your first trip. Pay attention to the
safety instructions in the manual.
We would also like to welcome you to our world-wide network of
distributors and repair shops, which can help you with technical
advice, service, and spare parts.
The Garmin website at www.garmin.com presents up-to-date
information about your product. The support pages will provide
answers to frequently asked support questions, and you can
download software and chart updates. There is also contact
information to Garmin support should you have any questions.
You can locate your nearest Volvo Penta dealer through the
integrated dealer locator in the Glass Cockpit or by visiting our
website at www.volvopenta.com.
Welcome aboard!
Device Overview
The location of items may vary based upon the model.
À
Status bar that shows active alarms and functions
Á
Power key
Â
Automatic backlight sensor
Ã
SD or microSD
®
* memory card slot
*Seven-inch models have microSD card slots.
Using the Touchscreen
Tap the screen to select an item.
Drag or swipe your finger across the screen to pan or scroll.
Pinch two fingers together to zoom out.
Spread two fingers apart to zoom in.
On-Screen Buttons
These on-screen buttons may be displayed on some screens
and functions. Some buttons are accessible only in a
combination page or SmartMode
layout.
Button Function
Clears the on-screen icons and re-centers the screen on the
boat
Opens a full screen view of the item
Creates a new waypoint
Creates a route, with turns, to the destination
Adds a turn to the route at the selected location
Removes the last turn added from the route
Creates a direct route, without turns, to the destination
Creates an Auto Guidance route to the destination
Begins navigation
Ends navigation
Acquires a radar target and begins tracking it
Opens the menu for the page or function
Opens the presets menu for the page or function
Tips and Shortcuts
Press to turn the chartplotter on.
Select Home from any screen to return to the Home screen.
Select Menu to access additional settings about that screen.
Select Menu to close the menu when finished.
Press to open additional options, such as adjusting the
backlight and locking the touchscreen.
Press and select Power Off to turn the chartplotter off.
Locking and Unlocking the Touchscreen
You can lock the touchscreen to prevent inadvertent screen
touches.
1
Select > Lock Touchscreen to lock the screen.
2
Select to unlock the screen.
Accessing Owner's Manuals on the
Chartplotter
1
Select Info > Owner's Manual.
2
Select a manual.
3
Select Open.
Downloading the Manuals
You can get the latest owner's manual and translations of
manuals from the web.
1
Go to www.garmin.com/manuals/VolvoGlassCockpit7600.
TIP: To quickly open this web page, scan this code:
2
Download the manual.
Garmin Support Center
Go to support.garmin.com for help and information, such as
product manuals, frequently asked questions, videos, software
updates, and customer support.
Inserting Memory Cards
You can use optional memory cards with the chartplotter. Map
cards allow you to view high-resolution satellite imagery and
Introduction 1
aerial reference photos of ports, harbors, marinas, and other
points of interest. You can use blank memory cards to record
Garmin Quickdraw
Contours mapping, record sonar (with a
compatible transducer), and transfer data such as waypoints
and routes to another compatible chartplotter or a computer.
This device supports up to a 32 GB memory card, formatted to
FAT32.
1
Open the access flap or door
À
on the front of the
chartplotter.
2
Insert the memory card
Á
.
3
Press the card in until it clicks.
4
Close the door.
Software Update
You may need to update the device software when you install
the device or add an accessory to the device.
This device supports up to a 32 GB memory card, formatted to
FAT32.
Before you update the software, you can check to the software
version installed on your device (Viewing System Software
Information, page 44). Then, you can go to www.garmin.com
/support/software/marine.html, select See All Devices in this
Bundle, and compare the installed software version to the
software version listed for your product.
If the software on your device is older than the one listed on the
website, follow the steps to load the software on a memory card
(Loading the New Software on a Memory Card, page 2), and
then update the device software (Updating the Device Software,
page 2).
Loading the New Software on a Memory Card
You must copy the software update to a memory card using a
computer that is running Windows
®
software.
NOTE: You can contact Garmin customer support to order a
preloaded software update card if you do not have a computer
with Windows software.
1
Insert a memory card into the card slot on the computer.
2
Go to www.garmin.com/support/software/marine.html.
TIP: You can also download updated owner's manuals to
load on the chartplotter from this web page.
3
Select GPSMAP Series with SD Card.
4
Select Download next to GPSMAP Series with SD Card.
5
Read and agree to the terms.
6
Select Download.
7
Choose a location, and select Save.
8
Double-click the downloaded file.
A Garmin folder containing the software update is created in
the selected location. A dialog box opens to assist in
transferring the software update to a memory card.
9
Select Next.
10
Select the drive associated with the memory card, and select
Next > Finish.
A Garmin folder containing the software update is created on the
memory card. The software update can take several minutes to
load onto the memory card.
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software onto a
memory card (Loading the New Software on a Memory Card,
page 2).
1
Turn on the chartplotter.
2
After the home screen appears, insert the memory card into
the card slot.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card is
inserted.
3
Follow the on-screen instructions.
4
Wait several minutes while the software update process
completes.
5
When prompted, leave the memory card in place and restart
the chartplotter manually.
6
Remove the memory card.
NOTE: If the memory card is removed before the device
restarts fully, the software update is not complete.
GPS Satellite Signals
When you turn on the chartplotter, the GPS receiver must collect
satellite data and establish the current location. When the
chartplotter acquires satellite signals, appears at the top of
the Home screen. When the chartplotter loses satellite signals,
disappears and a flashing question mark appears over on
the chart.
For more information about GPS, go to www.garmin.com
/aboutGPS. For help acquiring satellite signals, see My device
will not acquire GPS signals, page 49.
Selecting the GPS Source
You can select your preferred source for GPS data, if you have
more than one GPS source.
1
Select Settings > System > GPS > Source.
2
Select the source for GPS data.
Customizing the Chartplotter
Home Screen
The chartplotter home screen provides access to all of the
features in the chartplotter. The features are dependant on the
accessories you have connected to the chartplotter. You may
not have all of the options and features discussed in this
manual.
The categories along the right of the screen provide quick
access to the main features of your chartplotter. For example,
the Sonar category displays the views and pages related to the
sonar feature. You can save items you commonly access to the
Favorites category.
All of the options along the bottom of the home screen are
visible on all other screens, except for the Settings button. The
Settings button is accessible only from the home screen.
When viewing another screen, you can return to the home
screen by selecting Home.
When multiple displays are installed on the Garmin Marine
Network, you can group them together into a station. A station
enables the displays to work together, instead of as several
separate displays. When you select Home on one display, each
2 Customizing the Chartplotter
display in the station returns to the home screen. You can
customize the layout of the pages on each display, making each
page different on each display. When you change the layout of a
page in one display, the changes appear on only that display.
When you change the name and symbol of the layout, those
changes appear on all displays in the station, to maintain a
consistent appearance.
The SmartMode items are geared toward an activity, such as
cruising or docking. When a SmartMode button is selected from
the home screen, each display in the station can show unique
information. For example, when Cruising is selected from the
home screen, one display can show the navigation chart and
another display can show the radar screen.
Adding an Item to Favorites
1
From the home screen, select a category from the right.
2
Hold a button on the left.
The item is added to the Favorites home screen category.
Customizing Pages
Customizing the Layout of a SmartMode or
Combination Page
You can customize the layout and data shown in the
combination pages and SmartMode layouts. When you change
the layout of a page in a display you are interacting with, the
change appears only on that display, except for the SmartMode
name and symbol. When you change the SmartMode name or
symbol for the layout, the new name or symbol appears on all
displays in the station.
1
Open a page to customize.
2
Select Menu.
3
Select Edit Layout or Edit Combo.
4
Select an option:
To change the name, select Name or Name & Symbol >
Name, enter a new name, and select Done.
To change the SmartMode symbol, select Name &
Symbol > Symbol, and select a new symbol.
To change the number of functions shown and the layout
of the screen, select Layout, and select an option.
To change the function of a portion of the screen, select
the area to change, and select a function from the list on
the right.
To change how the screens are split, drag the arrows to a
new location.
To change the data shown on the page and additional
data bars, select Overlays, and select an option.
To assign a preset to a portion of the SmartMode screen,
select Presets > Include, and select a preset from the list
on the right.
Adding a SmartMode Layout
You can add SmartMode layouts to suit your needs. Each
customization made to one SmartMode layout for the home
screen in a station appears on all displays in the station.
1
From the home screen, select SmartMode™ > Menu > Add
Layout.
2
Select an option:
To change the name, select Name & SymbolName, enter
a new name, and select Done.
To change the SmartMode symbol, select Name &
Symbol > Symbol, and select a new symbol.
To change the number of functions shown and the layout
of the screen, select Layout, and select an option.
To change the function of a portion of the screen, select
the area to change, and select a function from the list on
the right.
To change how the screens are split, drag the arrows to a
new location.
To change the data shown on the page and additional
data bars, select Overlays, and select an option.
To assign a preset to a portion of the SmartMode screen,
select Presets > Include, and select a preset from the list
on the right.
Adding a Custom Combination Screen
You can create a custom combination screen to suit your needs.
1
Select Combos > Menu > Add Combo.
2
Follow the on-screen instructions.
Customizing the Data Overlays
You can customize the data shown on a screen.
1
Select an option based on the type of screen you are
viewing:
From a full screen view, select Menu > Edit Overlays.
From a combination screen, select Menu > Edit Combo >
Overlays.
From a SmartMode screen, select Menu > Edit Layout >
Overlays.
TIP: To quickly change the data shown in an overlay box,
hold the overlay box.
2
Select an item to customize the data and data bar:
To change the data shown in an overlay box, select the
overlay box, select the new data to show, and select
Back.
To select the location and layout of the data overlay bar,
select Data, and select an option.
To customize the information shown when navigating,
select Navigation, and select an option.
To turn on other data bars, like the media controls, select
Top Bar or Bottom Bar, and select the necessary
options.
3
Select Done.
Linking a Layout to the Control and Joystick Buttons
You can link layouts to buttons on the control and joystick
buttons. When you press an assigned button, the linked layout
opens on the station screens.
1
From the Home screen, select Menu > Link Layout.
2
Select an item or button name.
3
Select Select Layout.
4
Select a layout to link to the item or button.
5
If necessary, repeat steps 2–4 for the remaining buttons.
When you press the assigned button on the control or joystick,
the assigned layout opens on the station screens.
Resetting the Station Layouts
You can restore the factory default layouts for all stations.
Select Settings > System > Station Information > Reset
Stations.
Presets
A preset is a collection of settings that optimize the screen or
view. You can use particular presets to optimize groups of
settings for your activity. For example, some settings might be
optimal for when you are fishing, and others might be optimal for
when you are cruising. Presets are available on some screens,
such as charts, sonar views, and radar views.
Customizing the Chartplotter 3
To select a preset for a compatible screen, select Menu > ,
and select the preset.
When you are using a preset and you make changes to the
settings or view, you can save the changes to the preset or
create a new preset based on the new customizations.
Saving a New Preset
After you have customized the settings and view of a screen,
you can save the customization as a new preset.
1
From a compatible screen, change the settings and view.
2
Select Menu > > Save > New.
3
Enter a name, and select Done.
Managing Presets
You can customize the pre-loaded presets and edit presets you
created.
1
From a compatible screen, select Menu > > Manage.
2
Select a preset.
3
Select an option:
To rename the preset, select Rename, enter a name, and
select Done.
To edit the preset, select Edit, and update the preset.
To delete the preset, select Delete.
To reset all presets to factory settings, select Reset All.
Setting the Vessel Type
You can select your boat type to configure the chartplotter
settings and to use features customized for your boat type.
1
Select Settings > My Vessel > Vessel Type.
2
Select an option.
Adjusting the Backlight
1
Select Settings > System > Sounds and Display >
Backlight.
TIP: Select > Backlight from any screen to open the
backlight settings.
2
Select an option:
Adjust the backlight level.
Select Auto.
Adjusting the Color Mode
1
Select Settings > System > Sounds and Display > Color
Mode.
TIP: Select > Color Mode from any screen to access the
color settings.
2
Select an option.
Customizing the Startup Screen
You can personalize the startup, splash screen on your
chartplotter.
1
Insert a memory card that contains the image you want to
use.
2
Select Settings > System > Sounds and Display > Startup
Image > Select Image.
3
Select the memory card slot.
4
Select the image.
For the best results, use an image that is 50 MB or less.
5
Select Set as Startup Image.
To view the splash screen with the new image, turn the
chartplotter off and on.
Communication with Wireless Devices
The chartplotters can create a wireless network to which you
can connect wireless devices.
Connecting wireless devices allows you to use Garmin apps,
including BlueChart
®
Mobile and Garmin Helm
. See
www.garmin.com for more information.
WiFi
®
Network
Setting Up the WiFi Wireless Network
The chartplotters can create a WiFi network to which you can
connect wireless devices. The first time you access the wireless
network settings, you are prompted to set up the network.
1
Select Settings > Communications > Wi-Fi® Network >
Wi-Fi® > On > OK.
2
If necessary, enter a name for this wireless network.
3
Enter a password.
You will need this password to access the wireless network
from a wireless device. The password is case-sensitive.
Connecting a Wireless Device to the Chartplotter
Before you can connect a wireless device to the chartplotter
wireless network, you must configure the chartplotter wireless
network (Setting Up the Wi
Fi Wireless Network, page 4).
You can connect multiple wireless devices to the chartplotter to
share data.
1
From the wireless device, turn on the WiFi technology and
search for wireless networks.
2
Select the name of your chartplotter wireless network (Setting
Up the Wi
Fi Wireless Network, page 4).
3
Enter the network password.
Changing the Wireless Channel
You can change the wireless channel if you have trouble finding
or connecting to a device, or if you experience interference.
1
Select Settings > Communications > Wi-Fi® Network >
Advanced > Channel.
2
Enter a new channel.
You do not need to change the wireless channel of devices
connected to this network.
Changing the WiFi Host
You can change which chartplotter is serving as the WiFi host.
The can be helpful if you are having trouble with WiFi
communications. Changing the WiFi host allows you to select a
chartplotter that is physically closer to your mobile device.
1
Select Settings > Communications > Wi-Fi® Network >
Advanced > Wi-Fi® Host.
2
Follow the on-screen instructions.
Wireless Remote Control
Pairing the Wireless Remote Control With the
Chartplotter
Before you can use the wireless remote control with a
chartplotter, you must pair the remote with the chartplotter.
You can connect a single remote to multiple plotters, and then
press the pairing key to switch between the chartlotters.
1
Select Settings > Communications > Wireless Devices >
Wireless Remote.
2
Select New Connection.
3
Follow the on-screen instructions.
Turning On and Off the Remote Backlight
Turning off the remote backlight can significantly increase the
battery life.
4 Communication with Wireless Devices
1
On the chartplotter, select Settings > Communications >
Wireless Devices > Wireless Remote > Backlight.
2
Follow the on-screen instructions.
Disconnecting the Remote from All Chartplotters
1
On the chartplotter, select Settings > Communications >
Wireless Devices > Wireless Remote > Disconnect All.
2
Follow the on-screen instructions.
Using the Garmin Helm Application with the
Chartplotter
Before you can control the chartplotter with the Garmin Helm
application, you must download and install the application, and
connect the chartplotter to a WiFi router.
1
Select Settings > Communications > Wireless Devices >
Helm App.
2
Select an option.
3
Use the application to view or control the chartplotter.
Wireless Wind Sensor
Connecting a Wireless Sensor to the Chartplotter
You can view data from a compatible wireless sensor on the
chartplotter.
1
Select Settings > Communications > Wireless Devices.
2
Select the wind sensor.
3
Select Enable.
The chartplotter begins searching for and connecting to the
wireless sensor.
To view data from the sensor, add the data to a data field or
gauge.
Adjusting the Wind Sensor Orientation
You should adjust this setting if the sensor does not face the
front of the boat, exactly parallel to the center line.
NOTE: The opening where the cable connects to the pole
indicates the front of the sensor.
1
Estimate the angle, in degrees clockwise around the mast, by
which the sensor points away from the center of the front of
the boat:
If the sensor is facing starboard, the angle should be
between 1 and 180 degrees.
If the sensor is facing port, the angle should be between
-1 and -180 degrees.
2
Select Settings > Communications > Wireless Devices.
3
Select the wind sensor.
4
Select Wind Angle Offset.
5
Enter the angle observed in step 1.
6
Select Done.
Connecting a quatix
®
Watch to the
Chartplotter
You can connect a compatible quatix watch, such as the quatix
3 watch, to a compatible chartplotter to view data from the
chartplotter on your quatix watch.
1
Bring the quatix watch within range (3 m) of the chartplotter.
2
From the quatix watch clock screen, select START > Boat
Data > START.
NOTE: If you have already connected to a chartplotter, and
would like to connect to a different chartplotter, open the Boat
Data screen, hold UP, and select Pair new.
3
On the chartplotter, select Settings > Communications >
Wireless Devices > Garmin Wearable > Enable
Connections > New Connection.
The chartplotter begins searching for and connecting to the
wearable device.
After the devices are paired, they connect automatically when
they are turned on and within range.
Connecting a Garmin Nautix
Device to the
Chartplotter
Pairing is the initial connection of two compatible wireless
devices. For example, the first time you connect a Garmin
Nautix device to a compatible chartplotter you are pairing the
devices. For a list of compatible devices, go to the product page
at www.garmin.com.
NOTE: You can pair a Garmin Nautix device to multiple
compatible devices for better coverage on larger vessels.
1
Bring the a Garmin Nautix device within range (3 m) of the
chartplotter.
The device automatically looks for all compatible devices
within range.
2
If necessary, from the wearable device menu, select Device
Connections > Pair New Device.
3
On the chartplotter, select Settings > Communications >
Wireless Devices > Garmin Wearable > Enable
Connections > New Connection.
The chartplotter begins searching for and connecting to the
wearable device.
After the devices are paired, they connect automatically when
they are turned on and within range.
Charts and 3D Chart Views
The charts and 3D chart views that are available depend on the
map data and accessories used.
You can access the charts and 3D chart views by selecting
Charts.
Navigation Chart: Shows navigation data available on your pre-
loaded maps and from supplemental maps, if available. The
data includes buoys, lights, cables, depth soundings,
marinas, and tide stations in an overhead view.
Perspective 3D: Provides a view from above and behind the
boat (according to your course) and provides a visual
navigation aid. This view is helpful when navigating tricky
shoals, reefs, bridges, or channels, and is beneficial when
trying to identify entry and exit routes in unfamiliar harbors or
anchorages.
Mariner’s Eye 3D: Shows a detailed, three-dimensional view
from above and behind the boat (according to your course)
and provides a visual navigation aid. This view is helpful
when navigating tricky shoals, reefs, bridges, or channels,
and when trying to identify entry and exit routes in unfamiliar
harbors or anchorages.
NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are
available with premium charts, in some areas.
Fish Eye 3D: Provides an underwater view that visually
represents the sea floor according to the chart information.
When a sonar transducer is connected, suspended targets
(such as fish) are indicated by red, green, and yellow
spheres. Red indicates the largest targets and green
indicates the smallest.
Fishing Chart: Provides a detailed view of the bottom contours
and depth soundings on the chart. This chart removes
navigational data from the chart, provides detailed
bathymetric data, and enhances bottom contours for depth
recognition. This chart is best for offshore deep-sea fishing.
Charts and 3D Chart Views 5
NOTE: The offshore Fishing chart is available with premium
charts, in some areas.
Radar Overlay: Superimposes radar information on the
Navigation chart or the Fishing chart, when the chartplotter is
connected to a radar. This feature is not available with all
models.
Navigation Chart and Offshore Fishing Chart
NOTE: The offshore Fishing chart is available with premium
charts, in some areas.
The Navigation and Fishing charts allow you to plan your
course, view map information, and follow a route. The Fishing
chart is for offshore fishing.
To open the Navigation chart, select Charts > Nav. Chart.
To open the Fishing chart, select Charts > Fishing Chart.
Zooming In and Out Using the Touchscreen
You can quickly zoom in and out of many screens, such as the
charts and sonar views.
Pinch two fingers together to zoom out.
Spread two fingers apart to zoom in.
Chart Symbols
This table contains some of the common symbols you might see
on the detailed charts.
Icon Description
Buoy
Information
Marine services
Tide station
Current station
Overhead photo available
Perspective photo available
Other features common to most charts include depth contour
lines, intertidal zones, spot soundings (as depicted on the
original paper chart), navigational aids and symbols,
obstructions, and cable areas.
Measuring a Distance on the Chart
1
From a chart or the Radar overlay, select a location.
2
Select Measure Distance.
A push pin appears on the screen at your present location.
The distance and angle from the pin is listed in the upper-left
corner.
TIP: To reset the pin and measure from the current location of
the cursor, select Set Reference.
Creating a Waypoint on the Chart
1
From a chart or a 3D chart view, select a location or object.
2
Select Create Waypoint or .
Viewing Location and Object Information on a Chart
You can view information about a location or an object on the
Navigation chart or the Fishing chart.
NOTE: The offshore Fishing chart is available with premium
charts, in some areas.
1
From the Navigation chart or Fishing chart, select a location
or object.
A list of options appears along the right side of the chart. The
options that appear vary based on the location or object you
selected.
2
Select an option:
To navigate to the selected location, select Navigate To.
To mark a waypoint at the cursor location, select Create
Waypoint.
To view the distance and bearing of the object from your
current location, select Measure Distance.
The distance and bearing appear on the screen. Select
Select to measure from a location other than your current
location.
To view tide, current, celestial, chart notes, or local
services information near the cursor, select Information.
Viewing Details about Navaids
From the Navigation chart, Fishing chart, Perspective 3D chart
view, or Mariner’s Eye 3D chart view, you can view details about
various types of navigation aids, including beacons, lights, and
obstructions.
NOTE: The offshore Fishing chart is available with premium
charts, in some areas.
NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are
available with premium charts, in some areas.
1
From a chart or 3D chart view, select a navaid.
2
Select the name of the navaid.
Navigating to a Point on the Chart
CAUTION
The Auto Guidance feature is based on electronic chart
information. That data does not ensure obstacle and bottom
clearance. Carefully compare the course to all visual sightings,
and avoid any land, shallow water, or other obstacles that may
be in your path.
When using Go To, a direct course and a corrected course may
pass over land or shallow water. Use visual sightings, and steer
to avoid land, shallow water, and other dangerous objects.
NOTE: The offshore Fishing chart is available with premium
charts, in some areas.
NOTE: Auto Guidance is available with premium charts, in some
areas.
1
From the Navigation chart or Fishing chart, select a location.
2
If necessary, select Navigate To.
3
Select an option:
To navigate directly to the location, select Go To or .
To create a route to the location, including turns, select
Route To or .
To use Auto Guidance, select Auto Guidance or .
4
Review the course indicated by the magenta line.
NOTE: When using Auto Guidance, a gray segment within
any part of the magenta line indicates that Auto Guidance
cannot calculate part of the Auto Guidance line. This is due to
the settings for minimum safe water depth and minimum safe
obstacle height.
5
Follow the magenta line, steering to avoid land, shallow
water, and other obstacles.
6 Charts and 3D Chart Views
Premium Charts
CAUTION
The Auto Guidance feature is based on electronic chart
information. That data does not ensure obstacle and bottom
clearance. Carefully compare the course to all visual sightings,
and avoid any land, shallow water, or other obstacles that may
be in your path.
NOTE: Not all models support all charts.
Optional premium charts, such as BlueChart g2 Vision
®
, allow
you to get the most out of your chartplotter. In addition to
detailed marine charting, premium charts may contain these
features, which are available in some areas.
Mariner’s Eye 3D: Provides a view from above and behind the
boat for a three-dimensional navigation aid.
Fish Eye 3D: Provides an underwater, three-dimensional view
that visually represents the sea floor according to the
information on the chart.
Fishing Charts: Shows the chart with enhanced bottom
contours and without navigational data. This chart works well
for offshore deep-sea fishing.
High Resolution Satellite Imagery: Provides high-resolution
satellite images for a realistic view of the land and water on
the Navigation chart (Showing Satellite Imagery on the
Navigation Chart, page 7).
Aerial Photos: Shows marinas and other navigationally
significant aerial photos to help you visualize your
surroundings (Viewing Aerial Photos of Landmarks,
page 7).
Detailed Roads and POI data: Shows detailed road and point
of interest (POI) data, which includes highly detailed coastal
roads and POIs such as restaurants, lodging, and local
attractions.
Auto Guidance: Uses specified information about your vessel
and chart data to determine the best path to your destination.
Viewing Tide Station Information
on the chart indicates a tide station. You can view a detailed
graph for a tide station to help predict the tide level at different
times or on different days.
NOTE: This feature is available with premium charts, in some
areas.
1
From the Navigation chart or Fishing chart, select a tide
station.
Tide direction and tide level information appear near .
2
Select the station name.
Animated Tide and Current Indicators
NOTE: This feature is available with premium charts, in some
areas.
You can view indicators for animated tide station and current
direction on the Navigation chart or the Fishing chart. You must
also enable animated icons in the chart settings (Showing Tides
and Current Indicators, page 7).
An indicator for a tide station appears on the chart as a vertical
bar graph with an arrow. A red arrow pointing downward
indicates a falling tide, and a blue arrow pointing upward
indicates a rising tide. When you move the cursor over the tide
station indicator, the height of the tide at the station appears
above the station indicator.
Current direction indicators appear as arrows on the chart. The
direction of each arrow indicates the direction of the current at a
specific location on the chart. The color of the current arrow
indicates the range of speed for the current at that location.
When you move the cursor over the current direction indicator,
the specific current speed at the location appears above the
direction indicator.
Color Current Speed Range
Yellow 0 to 1 knot
Orange 1 to 2 knots
Red 2 or more knots
Showing Tides and Current Indicators
NOTE: This feature is available with premium charts, in some
areas.
You can show static or animated tide and current station
indicators on the Navigation chart or Fishing chart.
1
From the Navigation or Fishing chart, select Menu > Chart
Setup > Tides & Currents.
2
Select an option:
To show current station indicators and tide station
indicators on the chart, select On.
To show animated tide station indicators and animated
current direction indicators on the chart, select Animated.
Showing Satellite Imagery on the Navigation Chart
NOTE: This feature is available with premium charts, in some
areas.
You can overlay high-resolution satellite images on the land or
on both land and sea portions of the Navigation chart.
NOTE: When enabled, high-resolution satellite images are
present only at lower zoom levels. If you cannot see high-
resolution images in your optional chart region, you can select
to zoom in. You also can set the detail level higher by changing
the map zoom detail.
1
From the Navigation chart, select Menu > Chart Setup >
Satellite Photos.
2
Select an option:
Select Land Only to show standard chart information on
the water, with photos overlaying the land.
Select Photo Map to show photos on both the water and
the land at a specified opacity. Use the slider bar to adjust
the photo opacity. The higher you set the percentage, the
more the satellite photos cover both land and water.
Viewing Aerial Photos of Landmarks
Before you can view aerial photos on the Navigation chart, you
must turn on the Satellite Photos setting in the chart setup.
NOTE: This feature is available with premium charts, in some
areas.
You can use aerial photographs of landmarks, marinas, and
harbors to help orient yourself to your surroundings or to
acquaint yourself with a marina or a harbor prior to arrival.
1
From the Navigation chart, select a camera icon:
To view an overhead photo, select .
To view a perspective photo, select . The photo was
taken from the location of the camera, pointed in the
direction of the cone.
2
Select Aerial Photo.
Selecting a Map
If your product has both BlueChart g2 and Garmin LakeVü
HD
built-in maps, you can select which map to use. Not all models
have both types of built-in maps.
1
From the Navigation chart, select Menu > Built-In Map.
2
Select an option:
When you are on an inland lake, select LakeVü™ HD.
When you are offshore, select BlueChart® g2.
Charts and 3D Chart Views 7
Automatic Identification System
The Automatic Identification System (AIS) enables you to
identify and track other vessels, and alerts you to area traffic.
When connected to an external AIS device, the chartplotter can
show some AIS information about other vessels that are within
range, that are equipped with a transponder, and that are
actively transmitting AIS information.
The information reported for each vessel includes the Maritime
Mobile Service Identity (MMSI), location, GPS speed, GPS
heading, time that has elapsed since the last position of the
vessel was reported, nearest approach, and time to the nearest
approach.
Some chartplotter models also support Blue Force Tracking.
Vessels being tracked with Blue Force Tracking are indicated on
the chartplotter with a blue-green color.
AIS Targeting Symbols
Symbol Description
AIS vessel. The vessel is reporting AIS information. The
direction in which the triangle is pointing indicates the
direction in which the AIS vessel is moving.
Target is selected.
Target is activated. The target appears larger on the chart. A
green line attached to the target indicates the heading of the
target. The MMSI, speed, and direction of the vessel appear
beneath the target, if the details setting has been set to Show.
If the AIS transmission from the vessel is lost, a message
banner appears.
Target is lost. A green X indicates that the AIS transmission
from the vessel is lost, and the chartplotter displays a
message banner asking whether the vessel should continue
to be tracked. If you discontinue vessel tracking, the lost
target symbol disappears from the chart or the 3D chart view.
Dangerous target in range. The target flashes while an alarm
sounds and a message banner appears. After the alarm has
been acknowledged, a solid red triangle with a red line
attached to it indicates the location and the heading of the
target. If the safe-zone collision alarm has been set to Off, the
target flashes, but the audible alarm does not sound and the
alarm banner does not appear. If the AIS transmission from
the vessel is lost, a message banner appears.
Dangerous target is lost. A red X indicates that the AIS
transmission from the vessel is lost, and the chartplotter
displays a message banner asking whether the vessel should
continue to be tracked. If you discontinue vessel tracking, the
lost dangerous target symbol disappears from the chart or the
3D chart view.
The location of this symbol indicates the closest point of
approach to a dangerous target, and the numbers near the
symbol indicate the time to the closest point of approach to
that target.
NOTE: Vessels being tracked with the Blue Force Tracking
feature are indicated with a blue-green color regardless of their
status.
Heading and Projected Course of Activated AIS
Targets
When heading and course over ground information are provided
by an activated AIS target, the heading of the target appears on
a chart as a solid line attached to the AIS target symbol. A
heading line does not appear on a 3D chart view.
The projected course of an activated AIS target appears as a
dashed line on a chart or a 3D chart view. The length of the
projected course line is based on the value of the projected
heading setting. If an activated AIS target is not transmitting
speed information, or if the vessel is not moving, a projected
course line does not appear. Changes in the speed, course over
ground, or rate of turn information transmitted by the vessel can
impact the calculation of the projected course line.
When course over ground, heading, and rate of turn information
are provided by an activated AIS target, the projected course of
the target is calculated based on the course over ground and the
rate of turn information. The direction in which the target is
turning, which is also based on the rate of turn information, is
indicated by the direction of the barb at the end of the heading
line. The length of the barb does not change.
When course over ground and heading information are provided
by an activated AIS target, but rate of turn information is not
provided, the projected course of the target is calculated based
on the course over ground information.
Showing AIS and MARPA Vessels on a Chart or on a
3D Chart View
Before you can show AIS vessels on a chart, you must have an
external AIS device and active transponder signals from other
vessels. Mini Automatic Radar Plotting Aid (MARPA)
functionality works with radar.
You can configure how other vessels appear on a chart or on a
3D chart view. The display range and MARPA settings
configured for one chart or one 3D chart view are applied only to
that chart or to that 3D chart view. The details, projected
heading, and trails settings configured for one chart or one 3D
chart view are applied to all charts and to all 3D chart views.
1
From a chart or a 3D chart view, select Menu > Other
Vessels > Display Setup.
2
Select an option:
To indicate the distance from your location in which AIS
vessels appear, select Display Range, and select a
distance.
To show MARPA-tagged vessels, select MARPA > Show.
To show details about AIS-activated and MARPA-tagged
vessels, select Details > Show.
To set the projected heading time for AIS-activated and
MARPA-tagged vessels, select Proj. Heading, and enter
the time.
To show the tracks of AIS vessels, select the length of the
track that appears using a trail, select Trails, and select
the length.
Activating a Target for an AIS Vessel
1
From a chart or a 3D chart view, select an AIS vessel.
2
Select AIS Vessel > Activate Target.
Viewing Information about a Targeted AIS Vessel
You can view the AIS signal status, MMSI, GPS speed, GPS
heading, and other information that is reported about a targeted
AIS vessel.
1
From a chart or a 3D chart view, select an AIS vessel.
2
Select AIS Vessel.
Deactivating a Target for an AIS Vessel
1
From a chart or a 3D chart view, select an AIS vessel.
2
Select AIS Vessel > Deactivate.
Viewing a List of AIS and MARPA Threats
1
From a chart or a 3D chart view, select Menu > Other
Vessels > List > Show.
2
Select the type of threats to include in the list.
Setting the Safe-Zone Collision Alarm
Before you can set a collision alarm, you must have a
compatible chartplotter connected to an AIS device or radar.
8 Charts and 3D Chart Views
The safe-zone collision alarm is used only with AIS and MARPA.
MARPA functionality works with radar. The safe zone is used for
collision avoidance and can be customized.
1
Select Settings > Alarms > Collision Alarm > On.
A message banner appears and an alarm sounds when a
MARPA-tagged object or an AIS-activated vessel enters the
safe-zone area around your boat. The object is also labeled
as dangerous on the screen. When the alarm is off, the
message banner and audible alarm are disabled, but the
object is still labeled as dangerous on the screen.
2
Select Range.
3
Select a distance for the safe-zone radius around your
vessel.
4
Select Time To.
5
Select a time at which the alarm will sound if a target is
determined to intersect the safe zone.
For example, to be notified of a pending intersection 10
minutes before it will likely occur, set Time To to 10, and the
alarm will sound 10 minutes before the vessel intersects the
safe zone.
AIS Distress Signals
Self-contained AIS distress signal devices transmit emergency
position reports when activated. The chartplotter can receive
signals from Search and Rescue Transmitters (SART),
Emergency Position Indicating Radio Beacons (EPIRB), and
other man overboard signals. Distress signal transmissions are
different than standard AIS transmissions, so they appear
differently on the chartplotter. Instead of tracking a distress
signal transmission for collision avoidance, you track a distress
signal transmission to locate and assist a vessel or person.
Navigating to a Distress Signal Transmission
When you receive a distress signal transmission, a distress
signal alarm appears.
Select Review > Go To to begin navigation to the
transmission.
AIS Distress Signal Device Targeting Symbols
Symbol Description
AIS distress signal device transmission. Select to see more
information about the transmission and begin navigation.
Transmission lost.
Transmission test. Appears when a vessel initiates a test of
their distress signal device, and does not represent a true
emergency.
Transmission test lost.
Enabling AIS Transmission Test Alerts
To avoid a large number of test alerts and symbols in crowded
areas such as marinas, you can select to receive or ignore AIS
test messages. To test an AIS emergency device, you must
enable the chartplotter to receive test alerts.
1
Select Settings > Alarms > AIS.
2
Select an option:
To receive or ignore Emergency Position Indicating Radio
Beacon (EPRIB) test signals, select AIS-EPIRB Test.
To receive or ignore Man Overboard (MOB) test signals,
select AIS-MOB Test.
To receive or ignore Search and Rescue Transponder
(SART) test signals, select AIS-SART Test.
Turning Off AIS Reception
AIS signal reception is turned on by default.
Select Settings > Other Vessels > AIS > Off.
All AIS functionality on all charts and 3D chart views is
disabled. This includes AIS vessel targeting and tracking,
collision alarms that result from AIS vessel targeting and
tracking, and the display of information about AIS vessels.
Chart and 3D Chart View Settings
NOTE: Not all settings apply to all charts and 3D chart views.
Some options require premium maps or connected accessories,
such as radar.
These settings apply to the charts and 3D chart views, except
the radar overlay and Fish Eye 3D (Fish Eye 3D Settings,
page 10).
From a chart or a 3D chart view, select Menu.
Waypoints and Tracks: Opens waypoint and tracks lists
(Waypoints and Tracks Settings on the Charts and Chart
Views, page 9).
Other Vessels: Adjusts how other vessels are shown (Other
Vessels Settings on the Charts and Chart Views, page 10).
Quickdraw Contours: Turns on bottom contour drawing, and
allows you to create fishing map labels.
Weather Radar: Shows weather radar imaging on the
Perspective 3D or Mariner's Eye 3D chart views.
Navaids: Shows navigational aids on the Fishing chart.
Chart Setup: See Navigation and Fishing Chart Setup,
page 10.
Chart Appearance: Adjusts the appearance of the different
charts and 3D chart views (Chart Appearance Settings,
page 9). This might appear in the Chart Setup menu.
Edit Overlays: Adjusts the data shown on the screen
(Customizing the Data Overlays, page 3). This might appear
in the Chart Setup menu.
Waypoints and Tracks Settings on the Charts and
Chart Views
From a chart or a 3D chart view, select Menu > Waypoints and
Tracks.
Tracks: Shows tracks on the chart or 3D chart view.
Waypoints: Shows the list of waypoints (Viewing a List of all
Waypoints, page 13).
Create Waypoint: Creates a new waypoint.
Waypoint Display: Sets how to display waypoints on the chart.
Active Tracks: Shows the active track options menu.
Saved Tracks: Shows the list of saved tracks (Viewing a List of
Saved Tracks, page 16).
Tracks Display: Sets which tracks to display on the chart based
on track color.
Chart Appearance Settings
You can adjust the appearance of the different charts and 3D
chart views. Each setting is specific to the chart or chart view
being used.
NOTE: Not all settings apply to all charts and 3D chart views
and chartplotter models. Some options require premium maps or
connected accessories.
From a chart or 3D chart view, select Menu > Chart Setup >
Chart Appearance.
Orientation: Sets the perspective of the map.
Detail: Adjusts the amount of detail shown on the map, at
different zoom levels.
Heading Line: Shows and adjusts the heading line, which is a
line drawn on the map from the bow of the boat in the
direction of travel, and sets the data source for the heading
line.
Panoptix Area: Shows and hides the area being scanned by
the Panoptix
transducer. The attitude and heading reference
system (AHRS) must be calibrated use this feature
(Calibrating the Compass, page 21).
Charts and 3D Chart Views 9
World Map: Uses either a basic world map or a shaded relief
map on the chart. These differences are visible only when
zoomed out too far to see the detailed charts.
Spot Depths: Turns on spot soundings and sets a dangerous
depth. Spot depths that are equal to or more shallow than the
dangerous depth are indicated by red text.
Shallow Shading: Sets the shades from the shoreline to the
specified depth.
Depth Shading: Specifies an upper and lower depth to shade
between.
Symbols: Shows and configures the appearance of various
symbols on the chart, such as the vessel icon, navaid
symbols, land POIs, and light sectors.
Inset Map: Shows a map zoomed in on the vessel's location in
the corner of the main map.
Style: Sets how the chart appears over 3D terrain.
Hazard Colors: Shows shallow water and land with a color
scale. Blue indicates deep water, yellow is shallow water, and
red is very shallow water.
Preferred Depth: Sets the appearance of a safe depth for the
Mariner’s Eye 3D chart view.
NOTE: This setting affects only the appearance of hazard
colors for the Mariner’s Eye 3D chart view. It does not affect
the safe water depth Auto Guidance setting or the sonar
shallow water alarm setting.
Range Rings: Shows and configures the appearance of range
rings, which help you to visualize distances in some chart
views.
Lane Width: Specifies the width of the navigation lane, which is
the magenta line in some chart views that indicates the
course to your destination.
Navigation and Fishing Chart Setup
NOTE: Not all settings apply to all charts and 3D chart views.
Some settings require external accessories or applicable
premium charts.
From the Navigation chart or Fishing chart, select Menu > Chart
Setup.
Satellite Photos: Shows high-resolution satellite images on the
land or on both land and sea portions of the Navigation chart,
when certain premium maps are used (Showing Satellite
Imagery on the Navigation Chart, page 7).
Water Overlay: Enables relief shading, which shows the
gradient of the bottom with shading, or sonar imagery, which
helps identify the density of the bottom. This feature is
available only with some premium maps.
Tides & Currents: Shows current station indicators and tide
station indicators on the chart (Showing Tides and Current
Indicators, page 7) and enables the tides and current slider,
which sets the time for which tides and currents are reported
on the map.
Roses: Shows a compass rose around your boat, indicating
compass direction oriented to the heading of the boat. A true
wind direction or apparent wind direction indicator appears if
the chartplotter is connected to a compatible marine wind
sensor.
Lake Level: Sets the present water level of the lake. This
feature is available only with some premium maps.
Inset Map: Shows a small map centered on your present
location.
Weather: Sets which weather items are shown on the chart,
when the chartplotter is connected to a compatible weather
receiver with an active subscription. Requires a compatible,
connected antenna and an active subscription.
Chart Appearance: Sets the appearance of the different charts
and 3D chart views (Chart Appearance Settings, page 9).
Other Vessels Settings on the Charts and Chart Views
NOTE: These options require connected accessories, such as
an AIS receiver or VHF radio.
From a chart or a 3D chart view, select Menu > Other Vessels.
List: Shows a list of AIS and MARPA vessels.
DSC: Shows the DSC list and sets the DSC trails on the chart.
Collision Alarm: Sets the safe-zone collision alarm (Setting the
Safe-Zone Collision Alarm, page 8).
Display Setup: See Showing AIS and MARPA Vessels on a
Chart or on a 3D Chart View, page 8.
Laylines Settings
To use the laylines features, you must connect a wind sensor to
the chartplotter.
When in sailing mode (Setting the Vessel Type, page 4), you
can display laylines on the navigation chart. Laylines can be
very helpful when racing.
From the navigation chart, select Menu > Sailing > Laylines.
Display: Sets how the laylines and vessel appear on the chart,
and sets the length of the laylines.
Sailing Ang.: Allows you to select how the device calculates
laylines. The Actual option calculates the laylines using the
measured wind angle from the wind sensor. The Manual
option calculates the laylines using manually entered
windward and leeward angles.
Windward Ang.: Allows you to set a layline based on the
windward sailing angle.
Leeward Ang.: Allows you to set a layline based on the leeward
sailing angle.
Tide Correction: Corrects the laylines based on the tide.
Layline Filter: Filters the layline data based on the time interval
entered. For a smoother layline that filters out some of the
changes in the boat's heading or true wind angle, enter a
higher number. For laylines that display a higher sensitivity to
changes in the boat's heading or true wind angle, enter a
lower number.
Fish Eye 3D Settings
NOTE: This feature is available with premium charts, in some
areas.
From the Fish Eye 3D chart view, select Menu.
View: Sets the perspective of the 3D chart view.
Tracks: Shows tracks.
Sonar Cone: Shows a cone that indicates the area covered by
the transducer.
Fish Symbols: Shows suspended targets.
Garmin Quickdraw Contours Mapping
WARNING
The Garmin Quickdraw Contours mapping feature allows users
to generate maps. Garmin makes no representations about the
accuracy, reliability, completeness or timeliness of the maps
generated by third parties. Any use or reliance on the maps
generated by third parties is at your own risk.
The Garmin Quickdraw Contours mapping feature allows you to
instantly create maps with contours and depth labels for any
body of water.
When Garmin Quickdraw Contours records data, a colored
circle surrounds the vessel icon. This circle represents the
approximate area of the map that is scanned by each pass.
10 Garmin Quickdraw Contours Mapping
A green circle indicates good depth and GPS position, and a
speed under 16 km/h (10 mph). A yellow circle indicates good
depth and GPS position, and a speed between 16 and 32 km/h
(10 and 20 mph). A red circle indicates poor depth or GPS
position, and a speed above 32 km/h (20 mph).
You can view Garmin Quickdraw Contours in a combination
screen or as a single view on the map.
The amount of saved data depends on the size of your memory
card, your sonar source, and the speed of your boat as you
record data. You can record longer when you use a single-beam
sonar. It is estimated that you might be able to record about
1,500 hours of data onto a 2 GB memory card.
When you record data on a memory card in your chartplotter,
the new data is added to your existing Garmin Quickdraw
Contours map, and is saved on the memory card. When you
insert a new memory card, the existing data does not transfer
onto the new card.
Mapping a Body of Water Using the Garmin
Quickdraw Contours Feature
Before you can use the Garmin Quickdraw Contours feature,
you must have a supported chartplotter with upgraded software,
sonar depth, your GPS position, and a memory card with free
space.
NOTE: This feature is not available on all models.
1
From a chart view, select Menu > Quickdraw Contours >
Start Recording.
2
When recording is complete, select Stop Recording.
3
Select Manage > Name, and enter a name for the map.
Adding a Label to a Garmin Quickdraw
Contours Map
You can add labels to a Garmin Quickdraw Contours map to
mark hazards or points of interest.
1
From the Navigation chart, select a location.
2
Select Add Quickdraw Label.
3
Enter text for the label, and select Done.
Garmin Quickdraw Community
The Garmin Quickdraw Community is a free, public, online
community that enables you to share your Garmin Quickdraw
Contours maps with others. You can also download maps other
users have created.
To access the Garmin Quickdraw Community, sign in to your
Garmin Connect
account, and then you can upload and
download maps using a memory card.
Accessing the Garmin Quickdraw Community
You can access the Garmin Quickdraw Community using
Garmin Connect website.
1
Go to connect.garmin.com.
2
Select Get Started > Quickdraw Community > Get Started.
3
If you do not have a Garmin Connect account, create one.
4
Sign in to your Garmin Connect account.
5
Select Marine in the upper-right to open the Garmin
Quickdraw widget.
TIP: Make sure you have a memory card in your computer to
share Garmin Quickdraw Contours maps.
Sharing Your Garmin Quickdraw Contours Maps with
the Garmin Quickdraw Community
You can share Garmin Quickdraw Contours maps that you have
created with others in the Garmin Quickdraw Community.
When you share a contour map, only the contour map is shared.
Your waypoints are not shared.
1
Remove the memory card from the chartplotter.
2
Insert the memory card into your computer.
3
Access the Garmin Quickdraw Community (Accessing the
Garmin Quickdraw Community, page 11).
4
Select Share Your Contours.
5
Browse to your memory card, and select the /Garmin folder.
6
Open the Quickdraw folder, and select the file named
ContoursLog.svy.
After the file is uploaded, delete the ContoursLog.svy file from
your memory card to avoid issues with future uploads. Your data
will not be lost.
Downloading Garmin Quickdraw Community Maps
You can download Garmin Quickdraw Contours maps that other
users have created and shared with the Garmin Quickdraw
Community.
1
Insert the memory card into your computer.
2
Access the Garmin Quickdraw Community (Accessing the
Garmin Quickdraw Community, page 11).
3
Select Search for Contours.
4
Use the map and search features to locate an area to
download.
The red dots represent Garmin Quickdraw Contours maps
that have been shared for that region.
5
Select Select an Area to Download.
6
Drag the edges of the box to select the area to download.
7
Select Start Download.
8
Save the file to your memory card.
TIP: If you cannot find the file, look in the "Downloads" folder.
The browser may have saved the file there.
9
Remove the memory card from your computer.
10
Insert the memory card in the chartplotter.
The chartplotter automatically recognizes the contours maps.
The chartplotter may take a few minutes to load the maps.
Garmin Quickdraw Contours Settings
From a chart, select Menu > Quickdraw Contours > Settings.
Display: Displays Garmin Quickdraw Contours. The User
Contours option shows your own Garmin Quickdraw
Contours maps. The Community Contours option shows the
maps you have downloaded from the Garmin Quickdraw
Community.
Recording Offset: Sets the distance between the sonar depth
and the contour recording depth. If the water level has
changed since your last recording, adjust this setting so the
recording depth is the same for both recordings.
For example, if the last time you recorded had a sonar depth
of 3.1 m (10.5 ft.), and today's sonar depth is 3.6 m (12 ft.),
enter -0.5 m (-1.5 ft.) for the a Recording Offset value.
User Display Offset: Sets differences in contour depths and
depth labels on your own contours maps to compensate for
changes in the water level of a body of water, or for depth
errors in recorded maps.
Garmin Quickdraw Contours Mapping 11
Comm. Display Offset: Sets differences in contour depths and
depth labels on the community contours maps to compensate
for changes in the water level of a body of water, or for depth
errors in recorded maps.
Survey Coloring: Sets the color of the Garmin Quickdraw
Contours display. When this setting is turned on, the colors
indicate the quality of the recording. When this setting is
turned off, the contour areas use standard map colors.
Green indicates good depth and GPS position, and a speed
under 16 km/h (10 mph). Yellow indicates good depth and
GPS position, and a speed between 16 and 32 km/h (10 and
20 mph). Red indicates poor depth or GPS position, and a
speed above 32 km/h (20 mph).
Depth Shading: Specifies the upper and lower limits of a depth
range and a color for that depth range.
Navigation with a Chartplotter
CAUTION
If your vessel has an autopilot system, a dedicated autopilot
control display must be installed at each steering helm in order
to disable the autopilot system.
The Auto Guidance feature is based on electronic chart
information. That data does not ensure obstacle and bottom
clearance. Carefully compare the course to all visual sightings,
and avoid any land, shallow water, or other obstacles that may
be in your path.
When using Go To, a direct course and a corrected course may
pass over land or shallow water. Use visual sightings, and steer
to avoid land, shallow water, and other dangerous objects.
NOTE: Some chart views are available with premium charts, in
some areas.
To navigate, you must choose a destination, set a course or
create a route, and follow the course or route. You can follow
the course or the route on the Navigation chart, Fishing chart,
Perspective 3D chart view, or Mariner’s Eye 3D chart view.
You can set and follow a course to a destination using one of
three methods: Go To, Route To, or Auto Guidance.
Go To: Takes you directly to the destination. This is the
standard option for navigating to a destination. The
chartplotter creates a straight-line course or navigation line to
the destination. The path may run over land and other
obstacles.
Route To: Creates a route from your location to a destination,
allowing you to add turns along the way. This option provides
a straight-line course to the destination, but allows you to add
turns into the route to avoid land and other obstacles.
Auto Guidance: Uses the specified information about your
vessel and chart data to determine the best path to your
destination. This option is available only when using a
compatible premium chart in a compatible chartplotter. It
provides a turn-by-turn navigation path to the destination,
avoiding land and other obstacles (Auto Guidance,
page 14).
When you are using a compatible Garmin autopilot
connected to the chartplotter using NMEA 2000
®
, the
autopilot follows the Auto Guidance route.
NOTE: Auto Guidance is available with premium charts, in
some areas.
Basic Navigation Questions
Question Answer
How do I make the
chartplotter point me in the
direction in which I want to go
(bearing)?
Navigate using Go To (Setting and
Following a Direct Course Using Go To,
page 13).
How do I make the device
guide me along a straight line
(minimizing cross track) to a
location using the shortest
distance from the present
location?
Build a single-leg route and navigate it
using Route To (Creating and
Navigating a Route From Your Present
Location, page 13).
How do I make the device
guide me to a location while
avoiding charted obstacles?
Build a multi-leg route and navigate it
using Route To (Creating and
Navigating a Route From Your Present
Location, page 13).
How do I make the device
steer my automatic pilot?
Navigate using Route To (Creating and
Navigating a Route From Your Present
Location, page 13).
Can the device create a path
for me?
If you have premium maps that support
Auto Guidance and are in an area
covered by Auto Guidance, navigate
using Auto Guidance (Setting and
Following an Auto Guidance Path,
page 15).
How do I change the Auto
Guidance settings for my
boat?
See Auto Guidance Path
Configurations, page 15.
Destinations
You can select destinations using various charts and 3D chart
views or using the lists.
Searching for a Destination by Name
You can search for saved waypoints, saved routes, saved
tracks, and marine services destinations by name.
1
Select Info > Services > Search by Name.
2
Enter at least a portion of the name of your destination.
3
If necessary, select Done.
The 50 nearest destinations that contain your search criteria
appear.
4
Select the destination.
Selecting a Destination Using the Navigation Chart
From the Navigation chart, select a destination.
Searching for a Marine Services Destination
NOTE: This feature is available with premium charts, in some
areas.
The chartplotter contains information for thousands of
destinations offering marine services.
1
Select Info > Services.
2
Select Offshore Services or Inland Services.
3
If necessary, select the marine service category.
The chartplotter shows a list of the nearest locations and the
distance and bearing to each.
4
Select a destination.
You can select Next Page or Previous Page to view
additional information or to show the location on a chart.
Searching for a Volvo Penta Dealer
Select Info > Services > Volvo Penta Dealers.
Stopping Navigation
While navigating, from the Navigation or Fishing chart, select
an option:
Select Menu > Stop Navigation.
12 Navigation with a Chartplotter
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Garmin GPSMAP® 8215, Volvo-Penta, U.S. Detailed Owner's manual

Category
Navigators
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI