For more detailed documentation, visit us online at www.adtran.com
WALL MOUNTING THE ATLAS 550 P/N 1200305L2
Mounting Guide, 61200305L2-19A, April 2003 Technical Support 1-888-4ADTRAN (1-888-423-8726) 2003 ADTRAN, All Rights Reserved
Step 4: Wall mount the ATLAS
550 chassis using four 3/32" to
1/8" (1 1/2" or greater in length)
wood screws.
Step 1: Attach both wall mount
brackets (supplied in shipment) to
chassis using four #6-32 (5/16" in
length) screws (supplied in shipment).
Step 2: Remove screws (using a
phillips-head screwdriver) and
disconnect all four rubber feet on
the bottom of the chassis.
Step 3: Prepare the
mounting surface by
attaching a board
(typically plywood, 3/4"
to 1" thick) to the wall.
(The board must be
attached to a stud in
the wall for stability.)
/
