American Standard T455430.002 Installation guide

American Standard
Brand
American Standard
Model
T455430.002
Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
ALL CONNECTIONS 1/2" (13 mm) NPT
CARE INSTRUCTIONS:
TOWN SQUARE
®
S
DIVERTER TRIM KIT
INSTALLATION
INSTRUCTIONS
T455430
Certied to comply with ANSI A112.18.1M
M965901 (4/18)
• To keep your new faucet looking new, please follow
these simple care instructions:
DO:
• Simply rinse the faucet clean with clear water.
• Dry the faucet with a soft cotton cloth.
DO NOT:
• Do not use any abrasive cleaners, cloths, or
paper towels.
• Do not use any cleaning agents containing
acids, polish abrasives, or harsh cleaners or
soaps.
• Regular and routine cleaning will reduce the need for
heavy cleaning and polishing. If heavy cleaning is
required, the following procedures are recommended:
• Remove as much surface dirt and lm using clear
water and soft cotton cloth (as described above).
• Use any of the following to remove tough surface
lm and build-up:
• Mild liquid detergents
• Clear ammonia free liquid glass cleaners
• Non-acidic, non-abrasive gentle liquid or fully dissolved
powder cleansers mixed according to manufacturers
directions.
• Non-abrasive liquid polishers
• Once clean, rinse faucet again with clear water to thoroughly
remove cleaner or polish and blot dry with a soft cotton cloth.
Flat Blade Screwdriver
Phillips Screwdriver
3-3/4 "
(97 mm)
3/4 "
(20 mm)
3-1/4 "
(82 mm)
3-1/4 "
(82 mm)
1-1/16"
(45 mm)
FINISHED
WALL
FINISHED
WALL
41 mm MIN.
(1-5/8" )
66 mm MAX.
(2-5/8")
71 mm
(2-3/4")
57 mm HOLE SIZE
(2-1/4")
- 2 -
•
M965901 (4/18)
2
3
HANDLE INSTALLATION
• Install KNOB MOUNT (1) onto VALVE STEM (2).
• Thread HANDLE SCREW (3) into VALVE STEM (2) and tighten.
• Align HANDLE (4, 4a) and push onto KNOB MOUNT (1).
• Tighten SET SCREW (5) in handle with
HEX WRENCH (6) SUPPLIED.
1
TRIM INSTALLATION
• Place ESCUTCHEON (1) onto ESCUTCHEON HOLDER (2).
• Align ESCUTCHEON (1). Thread ESCUTCHEON HOLDER (2) onto DIRVERTER VALVE (3).
• Tighten until ESCUTCHEON (1) is snug against ished wall.
OPERATING THE VALVE
• Turn water supply on and test installed tting.
• Rotate handle to all diverter positions to check operation of valve.
• Check for leaks.
1
2
3
2
1
3
5
6
4
OFF
- 3 -
M965901 (4/18)
TOWN SQUARE
®
S
DIVERTER TRIM KIT
MODEL NUMBER
T455430
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
BRUSHED NICKEL 295
LEGACY BRONZE 278
POLISH NICKEL 013
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
954027-YYYOA
ESCUTCHEON HOLDER KIT
M918005-0070A
HANDLE ADAPTER
M918432-0070A
ADAPTER SCREW
M918075-0070A
SET SCREW
M970464-YYY0A
HANDLE KIT
M970463-YYY0A
ESCUTCHEON KIT
  • Page 1 1
  • Page 2 2
  • Page 3 3

American Standard T455430.002 Installation guide

American Standard
Brand
American Standard
Model
T455430.002
Category
Sanitary ware
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers