American Standard T722.430.013 Installation guide

Category
Sanitary ware
Type
Installation guide
- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
RECOMMENDED TOOLS
M965849 (8/17)
ROUGHING-IN DIMENSIONS
ESTATE
®
DIVERTER TRIM KIT
INSTALLATION
INSTRUCTIONS
T722.430
Phillips Screwdriver
Certied to comply with ANSI A112.18.1M
Flat Blade Screwdriver
CARE INSTRUCTIONS:
To keep your new faucet looking new, please follow
these simple care instructions:
DO: – Simply rinse the faucet clean with clear water.
– Dry the faucet with a soft cotton cloth.
DO NOT:
– Do not use any abrasive cleaners, cloths,
or paper towels.
– Do not use any cleaning agents containing
acids, polish abrasives, or harsh cleaners
or soaps.
Regular and routine cleaning will reduce the need for
heavy cleaning and polishing. If heavy cleaning is
required, the following procedures are recommended:
Remove as much surface dirt and lm using clear
water and soft cotton cloth (as described above).
– Use any of the following to remove tough surface
lm and build-up:
– Mild liquid detergents
– Clear ammonia free liquid glass cleaners
– Non-acidic, non-abrasive gentle liquid or fully dissolved
powder cleansers mixed according to manufacturers
directions
– Non-abrasive liquid polishers
Once clean, rinse faucet again with clear water to
thoroughly remove cleaner or polish and blot dry with
a soft cotton cloth.
Failure to follow these care instructions may damage
the Faucet’s finish.
FINISHED
WALL
FINISHED
WALL
41 mm MIN.
(1-5/8" )
66 mm MAX.
(2-5/8")
70 mm
(2-3/4")
57 mm HOLE SIZE
(2-1/4")
ALL CONNECTIONS 1/2" NPT
103 mm
(4")
97 mm
(3-7/8")
87 mm
(3-1/2")
79 mm
(3-1/8")
56 mm
(2-1/4")
70 mm
(2-3/4")
- 2 -
1
M965849 (8/17)
TRIM INSTALLATION
2
HANDLE INSTALLATION
Install HANDLE ADAPTER (1) onto VALVE STEM (2).
Install HANDLE SCREW (3) and tighten.
Push HANDLE BASE (4) onto HANDLE ADAPTER (1).
Align LEVER HANDLE (7) and push into HANDLE
BASE (4).
Use HEX WRENCH (5) supplied and tighten
SET SCREW (6) to secure HANDLE (7).
1
2
3
Insert ESCUTCHEON (1) onto ESCUTCHEON
HOLDER (2).
Align ESCUTCHEON (1). Thread ESCUTCHEON
HOLDER (2) onto DIVERTER VALVE (3).
Tighten until ESCUTCHEON (1) is snug against
nished wall.
3
OPERATING THE VALVE
Turn water supply on and test installed tting.
Rotate handle to all diverter positions to check operation of valve.
Check for leaks.
OFF
2
1
3
4
5
6
7
- 3 -
M965849 (8/17)
ESTATE
®
DIVERTER TRIM KIT
MODEL NUMBER
T722.430
HOT LINE FOR HELP
For toll-free information and answers to your questions, call:
1 (800) 442-1902
Mon. - Fri. 8:00 a.m. to 8:00 p.m. EST
Saturday 10:00 a.m. to 4:00 p.m. EST
IN CANADA 1-800-387-0369
(TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-1200
012288-YYY0A
ESCUTCHEON
M970365-YYY0A
HANDLE KIT
M918005-0070A
HANDLE ADAPTER
M918432-0070A
HANDLE SCREW
M918075-0070A
SCREW KIT
954027-YYY0A
ESCUTCHEON HOLDER
Replace the “YYY” with
appropriate finish code
POLISHED CHROME 002
POLISHED NICKEL 013
LEGACY BRONZE 278
BRUSHED NICKEL 295
  • Page 1 1
  • Page 2 2
  • Page 3 3

American Standard T722.430.013 Installation guide

Category
Sanitary ware
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI