WallTech BXLDW User manual

Brand: WallTech

Model: BXLDW

Type: User manual

MODULAR STORAGE KIT

6’

21’’

Grid

24’’

Long Rail

40.8’’

Long Rail

19’’

Grid

GETTING STARTED

WITH WALLTECH

MODULAR STORAGE

Measure your area to determine height and width of your

space. Then use the grid below to draw your custom layout.

The Walltech rail and grid system allows you the exibility to t

any space.

Plan Your Space

Follow these simple steps to install your rails and grids. The

Walltech patented system makes it quick and easy.

Installation

TOOLS REQUIRED:

• Drill • Stud Finder • Pencil • Tape measure

• Fasteners (See packaging for details)

Find stud.

Position rail 1

and screw in

place. Do not

tighten.

Using rail 1 as

a guide, swing

it across.

Mark using

magnetic level

supplied.

Rail System

Fix rail 2 in

place.

Attach shelf sup-

plied to mid way

down both rails.

This will give cor-

rect distance at

bottom of rails.

Tighten all

screws and

secure.

Find stud. Screw

into top Center

hole. Position

grid in place

plumb.

Use the magne-

tic level supplied

to square up

the grid.

Grid System

Screw into all

the holes of the

grid and tighten

for additional

security.

Clip on the

accessories.

INCLUDED

MAGNETIC

LEVEL

CIE [email protected]

1-800-269-0818

D5942434-02E

MODULAR STORAGE KIT

Now you’re ready to select the perfect accessories for your

project. Choose from our wide variety of hooks, shelves, and

baskets to organize your closet, garage, or laundry room.

Select Your Accessories

Sliding Accessories

L04 – QTY

L05 – QTY

L06 – QTY

L08 – QTY

4.4”L x 7.8”W x 5.1”H 6.5”W x 5”H x 18”L 6.5”L x 18”W x 5.1”H 15”W x 5”H x 27”L

L11 – QTY

L12 – QTY

L09 – QTY

L10 – QTY

15”W x 7.5”H x 27”L 3”W x 2.7”H x 1.6”L 6”W x 3.8”H x 1.7”L 4.4”W x 5.3”H x 1.6”L

L13 – QTY

2.5”W x 3.5”H x 1.7”L

L14 – QTY

L15 – QTY

L16 – QTY

6.4”W x 3.5”H x 1.7”L 3.3”W x 3.7”H x 3.9”L 0.1”W x 1.9”H x 1.1”L

L17 – QTY

L18 – QTY

L21 – QTY

L22 – QTY

(online only) (online only)

13”W x 3.5”H x 18”L 17”W x 4”H x 27”L 2.8”L x 26.6”W x 3.4”H 15.2”L x 1.4”W x 3.4”H

L24 – QTY

L25 – QTY

(online only) (online only)

13.5”L x 27.3”W x 3.4”H 15.7”L x 27.3”W x 5.1”H

LSLIDE02

QTY

LSLIDE03

QTY

LSLIDE04

QTY

(online only) (online only) (online only)

14.8”L x 27.3”W x 4.1”H 14.8”L x 27.3”W x 6.4”H 14.8”L x 27.3”W

LSLIDE05

QTY

LSLIDE06

QTY

LSLIDE07

QTY

(online only)(online only) (online only)

14.8”L x 27.3”W 14.8”L x 27.3”W x 9”H 1.5”L x 3.8”W x 9”H

CIE [email protected]

1-800-269-0818

The Walltech Rail and Grid System is all you need hold every-

thing together. The four rail sizes make it easy to customize

your layout.

Select Your Wall Fixtures

L000 – QTY

SHORT DOUBLE RAIL

0.3”W x 19.6”H x 4.2”L

L03 - QTY

GRID

.3”W x 19”H x 21”L

What’s The Difference Between A Double or Single Rail?

Think of a double rail as two single rails side-by-side. You can

hook the right side of one accessory and the left side of an-

other accessory in the next row.

Fasteners Needed

Short Rail (000 & 02) 2 fasteners, Long Rail (00 & 01) 3 fasten-

ers, Grid (03) 8 fasteners

(Fasteners not included. Be sure to pick up the right fastener type for your walls.)

L02 – QTY

SHORT RAIL

0.3”W x 19.6”H x 2”L

L01 - QTY

LONG RAIL

0.3”W x 40.8”H x 2”L

L00 - QTY

LONG DOUBLE RAIL

0.3”W x 40.8”H x 4.2”L

CIE [email protected]

1-800-269-0818

WallTech BXLDW User manual

Brand: WallTech

Model: BXLDW

Type: User manual

Download PDF

report

WallTech BXLDW User manual

WallTech BXLDW User manual

Other documents