WallTech BDSW User manual

Type
User manual
MODULAR STORAGE KIT
6’
21’
Grid
24’
Long Rail
40.8’
Long Rail
19’
Grid
GETTING STARTED
WITH WALLTECH
MODULAR STORAGE
Measure your area to determine height and width of your
space. Then use the grid below to draw your custom layout.
The Walltech rail and grid system allows you the exibility to t
any space.
Plan Your Space
Follow these simple steps to install your rails and grids. The
Walltech patented system makes it quick and easy.
Installation
TOOLS REQUIRED:
• Drill • Stud Finder • Pencil • Tape measure
• Fasteners (See packaging for details)
2
3
Find stud.
Position rail 1
and screw in
place. Do not
tighten.
Using rail 1 as
a guide, swing
it across.
Mark using
magnetic level
supplied.
1
Rail System
5
6
Fix rail 2 in
place.
Attach shelf sup-
plied to mid way
down both rails.
This will give cor-
rect distance at
bottom of rails.
Tighten all
screws and
secure.
4
Find stud. Screw
into top Center
hole. Position
grid in place
plumb.
Use the magne-
tic level supplied
to square up
the grid.
2
1
Grid System
Screw into all
the holes of the
grid and tighten
for additional
security.
Clip on the
accessories.
3
4
INCLUDED
MAGNETIC
LEVEL
1-800-269-0818
D5942434-02E
MODULAR STORAGE KIT
Now you’re ready to select the perfect accessories for your
project. Choose from our wide variety of hooks, shelves, and
baskets to organize your closet, garage, or laundry room.
Select Your Accessories
Sliding Accessories
L04 – QTY
£
L05 – QTY
£
L06 – QTY
£
L08 – QTY
£
4.4”L x 7.8”W x 5.1”H 6.5”W x 5”H x 18”L 6.5”L x 18”W x 5.1”H 15”W x 5”H x 27”L
L11 – QTY
£
L12 – QTY
£
L09 – QTY
£
L10 – QTY
£
15”W x 7.5”H x 27”L 3”W x 2.7”H x 1.6”L 6”W x 3.8”H x 1.7”L 4.4”W x 5.3”H x 1.6”L
L13 – QTY
£
2.5”W x 3.5”H x 1.7”L
L14 – QTY
£
L15 – QTY
£
L16 – QTY
£
6.4”W x 3.5”H x 1.7”L 3.3”W x 3.7”H x 3.9”L 0.1”W x 1.9”H x 1.1”L
L17 – QTY
£
L18 – QTY
£
L21 – QTY
£
L22 – QTY
£
(online only) (online only)
13”W x 3.5”H x 18”L 17”W x 4”H x 27”L 2.8”L x 26.6”W x 3.4”H 15.2”L x 1.4”W x 3.4”H
L24 – QTY
£
L25 – QTY
£
(online only) (online only)
13.5”L x 27.3”W x 3.4”H 15.7”L x 27.3”W x 5.1”H
LSLIDE02
QTY
£
LSLIDE03
QTY
£
LSLIDE04
QTY
£
(online only) (online only) (online only)
14.8”L x 27.3”W x 4.1”H 14.8”L x 27.3”W x 6.4”H 14.8”L x 27.3”W
LSLIDE05
QTY
£
LSLIDE06
QTY
£
LSLIDE07
QTY
£
(online only)(online only) (online only)
14.8”L x 27.3”W 14.8”L x 27.3”W x 9”H 1.5”L x 3.8”W x 9”H
1-800-269-0818
The Walltech Rail and Grid System is all you need hold every-
thing together. The four rail sizes make it easy to customize
your layout.
Select Your Wall Fixtures
L000 – QTY
£
SHORT DOUBLE RAIL
0.3”W x 19.6”H x 4.2”L
L03 - QTY
£
GRID
.3”W x 19”H x 21”L
What’s The Difference Between A Double or Single Rail?
Think of a double rail as two single rails side-by-side. You can
hook the right side of one accessory and the left side of an-
other accessory in the next row.
Fasteners Needed
Short Rail (000 & 02) 2 fasteners, Long Rail (00 & 01) 3 fasten-
ers, Grid (03) 8 fasteners
(Fasteners not included. Be sure to pick up the right fastener type for your walls.)
L02 – QTY
£
SHORT RAIL
0.3”W x 19.6”H x 2”L
L01 - QTY
£
LONG RAIL
0.3”W x 40.8”H x 2”L
L00 - QTY
£
LONG DOUBLE RAIL
0.3”W x 40.8”H x 4.2”L
1-800-269-0818
  • Page 1 1
  • Page 2 2

WallTech BDSW User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI