MLM 100 AAP and MLM 200 AAP • Installation Guide
This guide provides instructions for installing the Extron Mounting faceplates, which are designed for use with the MLCPlus100 and MLCPlus200
MediaLink controllers, and EBP100 and EBP200eBUS button panels.
RESET
E
OFF
ON
PC
VIDEO
MUTE
LAPTOP
RESET
E
OFF
ON
PC
VIDEO
MUTE
LAPTOP
Plastic Spacer
1
1
Secure the MLC Plus or EBP
to the Mud Ring or Wall Box.
Do not overtighten.
Mud Ring Wall Boxor
NOTE: If the unit is NOT installed in a mud ring, you MUST install the plastic spacer. The spacer positions the unit to allow the
magnetic faceplate to attach properly and securely.
NOTE: Place the AAP plates as close together as possible. Do not leave gaps between plates.
HDMI
VGA
AUDIO
USB
RESET
E
OFF
ON
PC
VIDEO
MUTE
LAPTOP
Faceplate
Extron
DISPLAY
VOLUME
Metal AAP
Bracket
HDMI
VGA
AUDIO
USB
Install AAP Plates into
the Metal AAP Bracket.
Do not overtighten.
Tighten the
AAP Plates.
Install the
Metal AAP Bracket
to the Plastic Spacer.
Install the Faceplate.
Check for fit.
Lay the AAP Plates with
Bracket onto Faceplate.
Check for fit.
Faceplate
6
5
2
3
4
MLM 100 AAP and MLM 200 AAP • Installation Guide (Cont.)
Extron Headquarters
+1.800.633.9876 (USA/Canada)
Extron Europe
+31.33.453.4040
Extron Asia
+65.6383.4400
Extron Japan
+81.3.3511.7655
Extron China
+86.21.3760.1568
Extron Middle East
+971.4.2991800
Extron Australia
+61.8.8113.6800
Extron India
+91-80-3055.3777
© 2017 Extron Electronics All rights reserved. www.extron.com
68-3138-50 Rev. B
05 17