Install this item is a very interesting. Kindly try the following procedure steps.
1. Monitor :
The monitor has six color cables(Red / black / blue / white / green / brown ). The red wire
connected to positive 12V/24V, black wire to ground. If you use one camera as a backup
camera, Connect the color cable to 12V/24V positive power accordingly [ Green -CH1,
White- CH2 , Blue-CH3, Brown -CH4 ]. Another camera without guide line could be used
as a full time monitor.
2. The package include 2 cameras, you could add another 2 cameras and choose cable
length as your needs.
The connector is pins type, please be careful connect it correct and tightly. Every
connector has interface mark.
3. Use extend cable wiring camera to monitor V1/V2 yellow input. (there has a mark code
for every channel )
This is a operate video for your reference: https://youtu.be/cfJ26Hn0U8s
Please test item before install on vehicle.
Hope this can help you.
Any question, please contact us via camecho@163.com
Thanks
Camecho Official Shop
/