i
i
CHOOSE A NETWORK...
Home Network
Taptap_AP_XXXX
Setup 3: Connect TapTap to WiFi Router
When logging in the first time, click “setup
now” button on the screen of the TapTap app.
Leave the TapTap app, and go to the wifi
settings of your mobile device. Then connect to
the WiFi network starting with “Taptap_AP_”.
Return to the TapTap app, then select your
local network and enter your WiFi password.
The WiFi signal strength lights on the TapTap
device will start to blink, indicating that WiFi is
pairing with your TapTap. If TapTap has been
successfully connected to your WiFi, the
indicators stay constantly lit and the cloud
service light will light up.
06
1.
2.
3.
4.