Foxconn T70S Series User manual

T70S Series

Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the infor-

 mationinthismanualmaybechangedormodiedatanytime,Foxconn

does not obligate itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.0 for T70S Series motherboard.

Symbol description:

Note:

Refers to important information that can help you to use motherboard better,

and tells you how to avoid problems.

Caution:

Indicating a potential risk of hardware damage or physical injury may exist.

WEEE:

The use of this symbol indicates that this product may not be treated as

household waste. By ensuring this product is disposed of correctly, you

will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of

 thisproduct,pleasecontactyourlocalcityofce,yourhouseholdwaste

disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit:

http://www.foxconnchannel.com

All trade names are registered trademarks of respective manufacturers listed.

Allimagesareforreferenceonly,pleaserefertothephysicalmotherboardforspecicfeatures.

CAUTIO

N

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard T70S Series

is in conformity with

(referencetothespecicationunderwhichconformityisdeclaredin

accordance with 89/336 EEC-EMC Directive)

■EN55022:1998/A2:2003 Limitsandmethodsofmeasurementsofradio  

disturbance characteristics of information technology

equipment

■EN61000-3-2/:2000 Electromagneticcompatibility(EMC)

Part 3: Limits

 Section2:Limitsforharmoniccurrentemissions

(equipment input current <= 16A per phase)

■EN61000-3-3/A1:2001 Electromagneticcompatibility(EMC)

Part 3: Limits

 Section2:Limitsofvoltageuctuationsandickerinlow 

voltage supply systems for equipment with rated current

<= 16A

■EN55024/A2:2003 Informationtechnologyequipment-Immunity  

characteristics limits and methods of measurement

Signature:   Place/Date:TAIPEI/2013

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name: T70S Series

Responsible Party: PCE Industry Inc.

 Address: 458E.LambertRd.

  Fullerton,CA92835

 Telephone: 714-738-8868

 Facsimile: 714-738-8838

 EquipmentClassication: FCCClassBSubassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo

conditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept

any interference received, including interference that may cause undesired operation.

Tested to comply with FCC standards.

Signature:  Date:2013

Installation Precautions

Website: http://www.foxconnchannel.com

Support Website: http://www.foxconnsupport.com

Worldwide online contact Support: http://www.foxconnsupport.com/inquiry.aspx

CPU Support List: http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List: http://www.foxconnsupport.com/complist.aspx

Technical Support

■ Electrostaticdischarge(ESD)isthesuddenandmomentaryelectriccurrent

 thatowsbetweentwoobjectsatdifferentelectricalpotentials.Normallyit

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ EnsurethattheDCpowersupplyisturnedoffbeforeinstallingorremovingCPU,

memory, expansion cards or other peripherals. It is recommended to unplug the

AC power cord from the power supply outlet. Failure to unplug the power supply

cord may result in serious damage to your system.

CAUTIO

N

Please carefully read the following procedures to install your computer :

■ Itissuggestedtoselecthigh-quality,certiedfansinordertoavoiddamageto

the motherboard and CPU due to high temperature. Never turn on the computer

if the CPU fan is not properly installed.

■ WecannotguaranteethatyoursystemcanoperatenormallywhenyourCPU

is overclocked. Normal operation depends on the overclocking capacity of your

device.

■ Ifthereisany,whenconnectingUSB,audio,1394a,RS232COM,IrDAor

S/PDIF cables to the internal connectors on the motherboard, make sure their

pinouts are matching with the connectors on the motherboard. Incorrect

connections might damage the motherboard.

■ Whenhandlingthemotherboard,avoidtouchinganymetalleadsorconnectors.

■ Beforeturningonthepower,pleasemakesurethepowersupplyACinput

 voltagesettinghasbeenconguredtothelocalstandard.

■ Topreventdamagetothemotherboard,donotallowscrewstocomeincontact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ Ifyouareuncertainaboutanyinstallationstepsorhaveaproblemrelatedtothe

 useoftheproduct,pleaseconsultacertiedcomputertechnician.

Chapter 1 Product Introduction

1-1ProductSpecications ............................................................................ 2

1-2Layout ....................................................................................................4

1-3 Back Panel Connectors ..........................................................................5

Chapter 2 Hardware Installation

2-1InstalltheMemory ..................................................................................7

2-2InstallotherInternalConnectors ............................................................8

2-3Jumpers ...............................................................................................13

Chapter 3 BIOS Setup

Enter BIOS Setup .......................................................................................16

Main ............................................................................................................ 17

F-center ......................................................................................................19

Smart BIOS .............................................................................................19

Fox Intelligent Stepping ..........................................................................20

CPUConguration ..................................................................................21

Advanced ...................................................................................................22

North Bridge ............................................................................................22

ME Subsystem ........................................................................................23

OnboardDeviceConguration ................................................................24

SATAConguration .................................................................................25

Trusted Computing ..................................................................................26

Network Stack .........................................................................................26

Boot ............................................................................................................27

CSM parameters ....................................................................................28

Power .........................................................................................................29

Health .........................................................................................................31

Security ......................................................................................................32

Save & Exit .................................................................................................33

Chapter 4 CD Instruction

4-1Installdriverandutility .......................................................................... 35

1. Install Driver ........................................................................................35

2.InstallUtility .........................................................................................36

4-2FOXONE .............................................................................................37

1. Main Page ...........................................................................................38

2.CPUPage-CPUControl .................................................................... 41

3. Frequency Page - Frequency Control (Optional) ................................44

4.LimitSetting ........................................................................................44

5.VoltagePage-VoltageControl(Optional) ..........................................47

6. Fan Page - Fan Control ......................................................................47

4-3FOXLiveUpdate ................................................................................... 48

TABLE OF CONTENTS

1. Local Update .......................................................................................48

2.OnlineUpdate .....................................................................................50

3.Congure ............................................................................................53

4.About&Help .......................................................................................55

4-4FOXLOGO ..........................................................................................56

4-5FOXDMI ..............................................................................................57

4-6Smartcharger ......................................................................................57

Thank you for buying Foxconn T70S Series mother-

board. Foxconn products are engineered to maximize

computing power, providing only what you need for

break-through performance.

This chapter includes the following information:

■ProductSpecications

■Layout

■BackPanelConnectors

Chapter 1 Product Introduction

PRODUCT INTRODUCTION

2

1-1 Product Specications

CPU Support Intel

®

Celeron 807 Single-core Processor(T70S-V/T70S-VF)

Intel

®

Celeron 1037U Dual-core Processor(T70S/T70S-F)

Max processor power up to 17W

For the latest CPU information, please visit:

http://www.foxconnsupport.com/cpusupportlist.aspx

Chipset Intel

®

NM70

Memory 1x204-pinSO-DDR3DIMM

Support up to 8GB of system memory

Support DDR3 1600MHz architecture

Expansion Slots 1 x Mini PCI Express slot (Full size)

1 x Mini PCI Express slot (Half size)

SupportPCIExpressGen25GT/sdatarate

Storage Intel

®

NM70 chipset

-1xSATA2.0connectors(3Gb/sdatatransferrate)

- 1 x SATA 3.0 connectors (6Gb/s data transfer rate)

LAN Realtek RTL8111F Gigabit LAN controller

Support 10/100/1000Mbps

Audio RealtekALC662

-HighDenitionAudio

-2.1-channel

-Support Jack-Sensing function

USB Supportupto8xUSB2.0ports(4rearpanelports,2onboardUSB

headerssupporting4extraports)

SupportUSB2.0protocolupto480Mb/s

Internal

Connectors

1x4-pin19VDCpowerconnector(Option)

1 x CPU FAN header (3-pin)

1xSystemFANheader(4-pin)

1 x Front panel header

1 x Front Audio header (T70S-F/T70S-VF)

1 x SATA 3.0 connector

1xSATA2.0connector

2xSATAPowerheaders

2xUSB2.0headers

1 x Speaker header

1 x LVDS header (Optional)

1 x Audio Voltage Selection header (Optional)

1 x Internal Microphone header (T70S/T70S-V)

1 x Internal Speaker header (T70S/T70S-V)

1 x LED Switch header (Optional)

1 x Panel Voltage Selection header (Optional)

1 x Backlight Inverter Voltage selection header (Optional)

1 x Mouse header

1 x Keyboard header

PRODUCT INTRODUCTION

3

1 x TPM/TCM header

1 x INTR header

1 x COM header

1 x ME header

1 x Clear CMOS header

Back Panel

Connectors

1 x DC-IN power port

1 x HDMI port

1 x VGA port

4xUSB2.0ports

1xRJ45LANport

1 x Microphone port

1 x Line Out port

Hardware Monitor System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU Overheating warning

CPU/System fan speed control

Green Function

SupportACPI(AdvancedCongurationandPowerInterface)

Support S3(suspendtoRAM),S4(suspendtodisk)

Support EuP function

Bundled Software FOX ONE, FOX LiveUpdate, FOX LOGO, FOX DMI, Smart Charger

Operating System Support for Microsoft

®

Windows

®

8/7

Form Factor Mini-ITX Form Factor, 6.7 inches x 6.7 inches (17cm x 17cm)

PRODUCT INTRODUCTION

4

1-2 Layout

Note : The above motherboard layout is for reference only, please refer to the physical

motherboard for detail.

1.4-pin19VDCPowerConnector

2.System_FanHeader

3. LVDS Header

4.Audio Voltage Selection Header

5.MINIPCIExpressSlots

6. Front Audio Header

7. Internal Microphone Header

8. Internal Speaker Header

9. INTR Header

10. Clear CMOS Header

11.SATA2.0Connector

12.SATA3.0Connector

13. FrontUSB2.0Headers

14.FrontPanelHeader

15.SpeakerHeader

16. LED Switch Header

17. Panel Voltage Selection Header

18. SATA power Headers

19. Backlight Inverter Voltage Selection Header

20.MouseHeader

21.TPMHeader

22.ME Header

23.KeyboardHeader

24.COM Header

25.SODIMM Socket

26.Chipset: Intel

®

NM70

CPU: Intel

®

Celeron 807 (T70S-V/T70S-VF)

Intel

®

Celeron 1037U (T70S/T70S-F)

18

1

34

2

5

14 15 19

10

11

12

13

24

25

23

22

26

7

8

9

6

16 17 20 21

PRODUCT INTRODUCTION

5

1-3 Back Panel Connectors

1. Power Port

Use the 19V DC power port to connect19V-3.42Apower adapter.

2. HDMI Port

TheHDMI(High-DenitionMultimediaInterface)providesanall-digitalaudio/videointerface

to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI

audio/video device to this port. The HDMI Technology can support a maximum resolution of

1920x1080pbuttheactualresolutionssupporteddependonthemonitorbeingused.

3. VGA Port

To connect with external display devices, such as monitor or LCD display.

4. USB 2.0 Ports

TheUSBportsupportstheUSB2.0/1.1specication.UsethisportforUSBdevicessuchas

anUSBkeyboard/mouse,USBprinter,USBashdriveandetc.

5. RJ45 LAN Port

The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.

6. Audio Ports

Forthedenitionofeachaudioport,pleaserefertothetablebelow:

VGA Port RJ45LANPort

HDMI Port

Power Port

Line Out Microphone In

1

6

4

2

5

USB2.0Ports Audio Ports

3

Port 2.1-channel

Green Line Out

Pink Microphone In

Active Link

LED LED

LAN Type

Left: Active Right: Link

Status Description Status Description

1000M

Off No Link Off No Link

Green

Blinking

Data

Activity

Off 10Mb/s Connection

Green 100Mb/s Connection

Orange 1000Mb/s Connection

This chapter introduces the hardware installation

process, including memory, slots, pin headers and the

mounting of jumpers. Caution should be exercised dur-

ing the installation of these modules. Please refer to the

motherboard layout prior to any installation and read the

contents in this chapter carefully.

This chapter includes the following information :

■InstalltheMemory

■InstallotherInternalConnectors

■Jumpers

Chapter 2 Hardware Installation

HARDWARE INSTALLATION

7

2-1 Install the Memory

If you take a look at front side of memory module, it has asymmetric pin counts on both sides

separatedbyanotchinthemiddle,soitcanonlytinonedirection.Followthestepsbelowto

correctly install your memory modules into the sockets.

204-Pin

Step2:

The clips at both ends of the socket will

snap into place when the memory module

is securely inserted and pressed.

Notch

Step 1:

Plug the pin side of the memory module

into the socket slantwise, then press it

downrmly.

Read the following guidelines before you begin to install the memory :

■ Alwaysturnoffthecomputerandunplugthepowercordfromthepoweroutlet

before installing the memory to prevent hardware damage.

■ Memorymoduleshaveafoolproofdesign.Amemorymodulecanbeinstalledin

only one direction. If you are unable to insert the memory, switch the direction.

HARDWARE INSTALLATION

8

2-2 Install other Internal Connectors

Power Connectors

In order not to damage any device, make sure all the devices are installed properly before

applying the power supply.

This motherboard uses 19V DC power supply. You can choose one from the following two

power supply ways according to the actual conditions.

19V power port : DC_PWR

Firmly connect the power adapter cable into

the power port and make sure it is secure.

4-pin 19V DC Power Connector : PWR(Optional)

 Makesurethatthepowersupplycableandpinsareproperlyttedintotheconnectoronthe

 motherboard.Connectthe4-pin19Vpowersupplytothisconnector,thusprovidingpower

to the motherboard.

Pin # Denition

1 GND

2 GND

3 +19V

4 +19V

PWR

4

2

31

HARDWARE INSTALLATION

9

Front Panel Header : FP1

This motherboard includes one header for

connecting the front panel switch and LED

Indicators.

Hard Disk LED Connector (HDD-LED)

Connect to the chassis front panel IDE

indicator LED. It indicates the active status

of the hard disks. This 2-pin connector is

directional with +/- sign.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on

the front panel of the case; the system will

restart when the switch is pressed.

Power LED Connector (PWR-LED)

Connect to the power LED indicator on the

front panel of the chassis. The Power LED

indicates the system’s status. When the

system is in operation (S0 status), the LED

is on. When the system gets into sleep mode

(S1) , the LED is blinking; When the system

is in S3/S4 sleep state or power off mode

(S5),theLEDisoff.This2-pinconnectoris

directional with +/- sign.

Power Switch Connector (PWR-SW)

Connect to the power button on the front

panel of the chassis. Push this switch allows

the system to be turned on and off rather than

using the power supply button.

Serial ATA Connectors : SATA_1/2

The Serial ATA connector is used to connect with

SATA Hard Disk or CD devices which support this

feature.TheSATA_2allowsupto3GB/s

data transfer rate, the SATA_1 support SATA

3.0 specication, and allows up to 6GB/s data

transfer rate.

TPM Header : TPM

The TPM (Trusted Platform Module) provides the

ability to the PC to run applications more secure

and to make transactions and communication

more trustworthy. To utilize this function, you

should purchase additional device and install it.

HDD-LED

RESET-SW

NC

+

-

PWR-SW

+

-

PWR-LED

EMPTY

1

2

10

9

FP1

LCLK

LFRAMEn

LRESETn

LAD3

VDD

LAD0

3D3V_DUAL

NC_1

GND

LPCPDn

GND

EMPTY

LAD2

5V_SYS

LAD1

GND

NC_4

SERIRQ

CLKRUNin

NC_5

1 2

19 20

TPM

GND

TX+

TX-

GND

RX-

RX+

GND

1

SATA_2

GND

TX+

TX-

GND

RX-

RX+

GND

1

SATA_1

HARDWARE INSTALLATION

10

Audio Header : F_AUDIO

The audio header supports HD Audio standard.

It provides the Front Audio output choice.

Fan Header : SYS_FAN

The fan speed can be controlled and monitored

in “Health” section of the BIOS Setup. The fan

can be automatically turned off after the system

entersS3,S4andS5sleepingstates.

USB Headers : F_USB1/2

In addition to the USB ports on the rear panel,

this product also provides 10-pin USB headers

on its motherboard. By connecting through USB

cables with them, user can quickly expand another

USB ports on the front panel.

Speaker Header : SPEAKER

The speaker header is used to connect speaker

of the chassis.

Chassis Intrusion Alarm Header : INTR

The header can be connected to a security switch

on the chassis. The system can detect the chassis

intrusion through the function of this connector. If

eventually the chassis is closed, the system will

end a message out.

COM Header : COM

This motherboard supports one serial RS232

COM1 port for legacy compatibility. User must

purchaseanotherRS232cablewitha9-pinD-sub

connector at one end to connect with the external

RS232deviceandanotherendwith10-pinfemale

connector to connect with COM header in the

motherboard.

A_MIC2_L

A_MIC2_R

A_LINE2_L

SENSE_SEND

SENSE1_RETURN

PRESENCEJ

EMPTY

SENSE2_RETURN

AUD_GND

1

2

109

F_AUDIO

A_LINE2_R

SYS_FAN

SENSE

POWER

GND

CONTROL

1

VCC

D-

EMPTY

D+

GND

D+

D-

GND

NC

VCC

1 2

109

F_USB1/2

NC

PWR

EMPTY

SPEAKER

SPKJ

1

INTR

GND

INTRUDERJ

1

DCD

SOUT

RI

GND

RTS

DSR

DTR

CTS

EMPTY

SIN

1 2

109

COM

HARDWARE INSTALLATION

11

Mini PCIE Slot : MINIPCIE1/2

The MINI PCIE Slot is used to connect Mini

PCIE device.

Audio Voltage Selection Header :

AUDIO_ADJ

This header is used to connect the volume con-

troller which is used to adjust the volume.

Internal Microphone Header : IN_MIC

This header is used to connect microphone

device.

Internal Speaker Header : SPK_CONN

This header is used to connect speaker device

to play audio.

LED Switch Header : PANEL_EN

This header is used to connect the display

panel controller device to control the display

panel on/off.

SATA Power Header : SATA_PWR1/2

Connect the power header of SATA power-

signal cable into this header to power SATA

device.

Keyboard Header : H_KB

Usingthisheader,youcangetastandardPS/2

keyboard port expanded.

MINIPCIE1/2

VOLUME_UP

VOLUME_DOWN

NC

GND

AUDIO_ADJ

1

5

2

6

1

IN_MIC

A_MIC2_RL

GND_AUDIO

1

SPK_CONN

SPKOUT_R_P

SPKOUT_L_P

SPKOUT_R_N

SPKOUT_L_N

1

SATA_PWR1/2

5V_SYS

GND

12V_SYS

3D3V_SYS

H_KB

HEAD_KDAT

GND

HEAD_KCLK

5V_DUAL

1

PANEL_EN

GND

PANEL_ON_OFF

1

HARDWARE INSTALLATION

12

H_MS

HEAD_MDAT

GND

HEAD_MCLK

5V_DUAL

1

LKLT_CTRL

BRIGHT_ADJ

GND

BRIGHT_PWR

BRIGHT_DOWN

BKLT_ON

GND

BRIGHT_PWR

BRIGHT_UP

Mouse Header : H_MS

Usingthisheader,youcangetastandardPS/2

mouse port expanded.

LVDS Header : LVDS1

This header is used to connect the display

panel.

Backlight Inverter Voltage selection

Header : LKLT_CTRL

This header is used to connect the backlight

controller to adjust the screen brightness.

2930

12

LVDS1

GND

LVDSB_DATA0

LVDSB_DATA0#

LVDSB_DATA2

LVDSB_DATA2#

LVDSB_DATA3

LVDSB_DATA3#

GND

LVDSA_DATA0

LVDSA_DATA0#

LVDSA_DATA2

LVDSA_DATA2#

GND

LCDVDD

GND

LVDSB_DATA1

LVDSB_DATA1#

LVDSB_CLK

LVDSB_CLK#

GND

LVDSA_DATA3

LVDSA_DATA3#

LVDSA_DATA1

LVDSA_DATA1#

LVDSA_CLK

LVDSA_CLK#

GND

LCDVDD

HARDWARE INSTALLATION

13

2-3 Jumpers

For some features needed, users can change the jumper settings on this motherboard to modify

them. This section explains how to use the various functions of this motherboard by changing the

jumper settings. Users should read the following content carefully prior to modifying any jumper

setting.

Description of Jumpers

1.Foranyjumperonthismotherboard,Pin1canbeidentiedbytheboldsilkscreennexttoit.

However, in this manual, Pin 1 is simply labeled as “1”.

2.Thefollowingtableexplainsdifferenttypesofthejumpersettings."Closed"meansplacinga

jumper cap on the two pins to temporarily short them. The shorting can also be done by touching

two pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can

prevent hazardous ESD (Electrical Static Discharge) problem.

Clear CMOS Jumper: CLR_CMOS

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,

date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to

factorydefaultwhentheBIOSsettingsweremistakenlymodied.

The steps to clear CMOS data are :

1. Turn off the computer, unplug the power cord from the power outlet.

2.Removejumpercapfrompins1-2,putitontopins2-3toshortthem.ThiswillclearCMOSdata.

3.Returnthesettingtoitsoriginalwithpins1-2closed.

4.Pluginthepowercordtoyourcomputerandturniton.

5.GotoBIOSSetuptocongurenewsystemasdescribedinnextchapter.

Clear

1

2

3

Normal

(Default)

1

2

3

CLR_CMOS

Jumper Diagram Denition Description

Closed SetPin1andPin2closed

Open SetPin1andPin2Open

1-2 SetPin1andPin2closed

2-3 SetPin2andPin3closed

1

■ Disconnectthepowercablebeforeadjustingthejumpersettings.

■ DonotcleartheCMOSwhilethesystemisturnedon.

CAUTIO

N

Page is loading ...

Foxconn T70S Series User manual

This manual is also suitable for

Foxconn T70S Series User manual

Related papers

Other documents