Foxconn H61M Series User manual

Brand: Foxconn

Model: H61M Series

Category: Motherboards

Type: User manual

This manual is also suitable for

H61M-S

H61M Series Motherboard

User’s Manual

Statement:

This manual is the intellectual property of Foxconn, Inc. Although the information

in this manual may be changed or modied at any time, Foxconn does not obligate

itself to inform the user of these changes.

Trademark:

All trademarks are the property of their respective owners.

Version:

User’s Manual V1.0 for H61M Series motherboard.

Symbol description:

Caution: refers to important information that can help you to use motherboard

better, and tells you how to avoid problems.

Warning: indicating a potential risk of hardware damage or physical injury may

exist.

WEEE:

The use of this symbol indicates that this product may not be treated as household

waste. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could other-

wise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local city ofce, your

household waste disposal service or the shop where you purchased this product.

More information:

If you want more information about our products, please visit Foxconn’s

website: http://www.foxconnchannel.com

CAUTION

All trade names are registered trademarks of respective manufacturers listed.

All images are for reference only, please refer to the physical motherboard for specic features.

Declaration of conformity

HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,

TAIPEI HSIEN, TAIWAN, R.O.C.

declares that the product

Motherboard H61M-S/H61M

is in conformity with

(reference to the specication under which conformity is declared in

accordance with 89/336 EEC-EMC Directive)

■ EN 55022: 1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology

equipment

■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits for harmonic current emissions

(equipment input current <= 16A per phase)

■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)

Part 3: Limits

Section 2: Limits of voltage uctuations and icker in low

voltage supply systems for equipment with rated current

<= 16A

■ EN 55024/A2:2003 Information technology equipment-Immunity

characteristics limits and methods of measurement

Signature : Place / Date : TAIPEI/2011

Printed Name : James Liang

Declaration of conformity

Trade Name: FOXCONN

Model Name: H61M-S/H61M

Responsible Party: PCE Industry Inc.

Address: 458 E. Lambert Rd.

Fullerton, CA 92835

Telephone: 714-738-8868

Facsimile: 714-738-8838

Equipment Classication: FCC Class B Subassembly

Type of Product: Motherboard

Manufacturer: HON HAI PRECISION INDUSTRY

COMPANY LTD

Address: 66 , CHUNG SHAN RD., TU-CHENG

INDUSTRIAL DISTRICT, TAIPEI HSIEN,

TAIWAN, R.O.C.

Supplementary Information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions : (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Tested to comply with FCC standards.

Signature : Date : 2011

Installation Precautions

Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certied fans in order to avoid damage

to the motherboard and CPU due to high temperature. Never turn on the

computer if the CPU fan is not properly installed.

■ We cannot guarantee that your system can operate normally when your

CPU is overclocked. Normal operation depends on the overclocking capac-

ity of your device.

■ If there is any, when connecting USB, audio, 1394a, RS232 COM, IrDA or

S/PDIF cables to the internal connectors on the motherboard, make sure

their pinouts are matching with the connectors on the motherboard. Incorrect

connections might damage the motherboard.

■ When handling the motherboard, avoid touching any metal leads or connec-

tors.

■ If there is a PCI Express x16 graphics card installed in your system, we

recommend using a 24-pin ATX power supply to get the best performance.

■ Before turning on the power, please make sure the power supply AC input

voltage setting has been congured to the local standard.

■ To prevent damage to the motherboard, do not allow screws to come in contact

with the motherboard circuit or its components. Also, make sure there are no

leftover screws or metal components placed on the motherboard or within the

computer casing.

■ If you are uncertain about any installation steps or have a problem related to

the use of the product, please consult a certied computer technician.

CAUTION

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that ows between two objects at different electrical potentials. Normally it

comes out as a spark which will quickly damage your electronic equipment.

Please wear an electrostatic discharge (ESD) wrist strap when handling

components such as a motherboard, CPU or memory.

■ Ensure that the DC power supply is turned off before installing or removing

CPU, memory, expansion cards or other peripherals. It is recommended to

unplug the AC power cord from the power supply outlet. Failure to unplug

the power supply cord may result in serious damage to your system.

TABLE OF CONTENTS

Chapter 1 Product Introduction

Product Specications .............................................................................. 2

Layout.......................................................................................................4

Back Panel Connectors ............................................................................ 5

Chapter 2 Hardware Install

Install the CPU and CPU Cooler ..............................................................8

Install the Memory .................................................................................. 11

Install an Expansion Card ......................................................................14

Install other Internal Connectors ............................................................15

Jumpers ..................................................................................................19

Chapter 3 BIOS Setup

Main ........................................................................................................23

F-Center .................................................................................................25

Advanced ...............................................................................................30

Boot ........................................................................................................36

Power .....................................................................................................37

Health .....................................................................................................39

Security ..................................................................................................40

Exit .........................................................................................................41

Chapter 4 CD Instruction

Install driver and utility ............................................................................ 43

FOX ONE

Main Page ........................................................................................46

CPU Control .....................................................................................50

Frequency Control ............................................................................ 52

Limit Setting......................................................................................53

Voltage Control ................................................................................. 55

Fan Control.......................................................................................56

FOX LiveUpdate

Local Update ....................................................................................57

Online Update ..................................................................................59

Congure .........................................................................................62

About & Help ....................................................................................64

FOX LOGO .............................................................................................65

FOX DMI ................................................................................................66

Technical Support :

Website :

http://www.foxconnchannel.com

Support Website :

http://www.foxconnsupport.com

Worldwide online contact Support :

http://www.foxconnsupport.com/inquiry.aspx

CPU Support List :

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List :

http://www.foxconnsupport.com/complist.aspx

Support

Thank you for buying Foxconn H61M/H61M-S Series motherboard.

Foxconn products are engineered to maximize computing power,

providing only what you need for break-through performance.

With a range of connectivity features for today multi-media computing

requirements, H61M-S/H61M enables you to unleash more power

from your computer.

This chapter includes the following information:

■ Product Specications

■ Layout

■ Back Panel Connectors

CPU

Support LGA1155 for Intel Sandybridge series CPU

Max processor power up to 95W

Support 32nm CPU

For the latest CPU information,

please visit：

http://www.foxconnsupport.com/cpusupportlist.aspx

Chipset

Intel®

H61

Memory* 4 x 240-pin DDR3 DIMMs

Support up to 16GB of system memory

Dual channel DDR3 1333/1066MHz architecture

Expansion Slots 1 x PCI Express 2.0 x16 slots

1 x PCI Express x1 slots

2 x PCI slots

Storage H61 chipset:

- 4 x SATA 2.0 connectors 3Gb/s data transfer rate

Asmedia ASM1061:

- 2 x SATA 3.0 connectors 6Gb/s data transfer rate (only for H61M-S)

LAN Realtek 8111E Gigabit LAN chip

Audio Realtek ALC662 audio chip:

- High Denition Audio

- 2/4/5.1-channel

- Support for S/PDIF Out

- Support Jack-Sensing function

USB H61 chipset:

Support up to 10 x USB 2.0 ports (6 rear panel ports, 2 onboard

USB headers supporting 4 extra ports)(H61M)

- Support up to 10 x USB 2.0 ports (4 rear panel ports, 3 onboard

USB headers supporting 6 extra ports)(H61M-S)

Etron EJ168A:

- Support up to 2 x USB 3.0 ports(H61M-S)

Internal Connectors 1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

4 x SATA 2.0 connectors

2 x SATA 3.0 connectors(H61M-S)

3 x USB 2.0 header (supporting 6 x USB devices)(H61M-S)

2 x USB 2.0 header (supporting 4 x USB devices)(H61M)

1 x CPU fan header (4-pin)

1 x System fan header (4-pin)

1 x Front panel header

1 x Front Audio header

1 x SPDIF_OUT header

1 x Speaker header

1-1 Product Specications

Internal Connectors 1 x Chassis intrusion alarm header

1 x COM1 header

1 x TPM header

1 x CLR_CMOS header

1 x Parallel header

1 x ME Jumper

Back Panel 1 x PS/2 Keyboard/Mouse port

Connectors 1 x VGA port

1 x DVI-D port

1 x HDMI port

6 x USB 2.0 ports(H61M)

4 x USB 2.0 ports(H61M-S)

2 x USB 3.0 ports (H61M-S)

1 x RJ-45 LAN port

3-ports Audio jacks

Hardware Monitor System voltage detection

CPU/System temperature detection

CPU/System fan speed detection

CPU overheating warning

CPU/System fan speed control

PCI Express x1 Support 250MB/s (500MB/s concurrent) bandwidth

Low power consumption and power management features

PCI Express x16 Support 2.5GT/s (5GT/s concurrent) bandwidth

Low power consumption and power management features

Green Function Support ACPI (Advanced Conguration and Power Interface)

Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM),

S4 (suspend to disk), S5 (soft - off)

Support EuP Function

Bundled Software FOX ONE

FOX LiveUpdate

FOX LOGO

FOX DMI

SMART CHARGER

Operating System Support for Microsoft® Windows® 7/XP

Form Factor Micro ATX Form Factor, 9.6 inches x 8.8 inches (24.4cm x 22.4cm)

1-2 Layout

Note : The above motherboard layout is for reference only, please refer to the physical

motherboard for detail.

1. 4-pin ATX 12V Power Connector

2. SYS_FAN1 Header

3. PCI Express x16 Slot

4. PCI Express x1 Slot

5. PCI Express Slot

6. Front Audio Header

7. SPDIF_OUT Header

8. Speaker Header

9. Front USB Header

10. PCH_ME_ENABLE Jumper

11. Front Panel Header

12. Clear CMOS Jumper

13. TPM Header

14. SATA Connectors

15 Chipset: Intel

H61

16. 24-pin ATX Power Connector

17. LPT Header

18. INTR2 Header

19. COM1 Header

20. DDR3 DIMM Slots

21. CPU_FAN Header

22. LGA1155 CPU Socket

14 1615

5 34

1-3 Back Panel Connectors

1. PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse.

2. PS/2 Keyboard Port

Use the lower port (purple) to connect a PS/2 keyboard.

3. VGA Port

Use this port to connect external display devices, such as monitor or LCD display.

4. DVI_D Port

The DVI-D port supports DVI-D specication. Connect a monitor that supports DVI-D connection

to this port.

5. HDMI Port

The HDMI (High-Denition Multimedia Interface) provides an all-digital audio/video interface to

transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/

video device to this port. The HDMI Technology can support a maximum resolution of 1920x1080p

but the actual resolutions supported depend on the monitor being used.

Back panel connectors of 5.1 channel (H61M-S):

Back panel connectors of 5.1 channel (H61M):

LAN Port

Audio Ports

VGA Port

DVI-D Port

Line In

Line Out

Microphone

USB 3.0 Ports

(only for H61M-S)

LAN Port

PS/2 Mouse Port

Audio Ports

Line Out

Microphone In

Line In

VGA Port

USB Ports

DVI-D Port

HDMI Port

PS/2 Keyboard Port

3 5

8 9

3 5

PS/2 Mouse Port

PS/2 Keyboard Port

HDMI Port

USB Ports

LAN Type

Left: Active Right: Link

Status Description Status Description

1000M

Off No Link Off No Link

Green

Blinking

Data

Activity

Off 10Mb/s Connection

Green 100Mb/s Connection

Orange 1000Mb/s Connection

Active

LED

Link

LED

Port 2-channel 4-channel 5.1-channel

Blue Line In Rear Speaker Out

Rear Speaker Out

Green Line Out Front Speaker Out Front Speaker Out

Pink Microphone In Microphone In Center/Subwoofer Out

6. USB Ports

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as

an USB keyboard/mouse, USB printer, USB ash drive and etc.

7. RJ-45 LAN Port

The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.

8. USB 3.0 Ports (only for H61M-S)

The USB port supports the USB 3.0/2.0/1.1 specication. Use this port for USB devices such

as an USB keyboard/mouse, USB printer, USB ash drive and etc. You need to install the USB

3.0 driver in the Driver CD before using it.

9. Audio Ports (3 jacks)

For the denition of each audio port, please refer to the table below :

: Please refer to Chapter 4, and run the Realtek audio driver (in CD) to assign the audio output

ports for different applications of 2/4/5.1 channels or 2/4/5/7.1 channels. The fundamental

audio outputs are depicted in the table above.

Both HDMI and DVI ports share the same signals. They are not able to work at the same time.

CAUTION

This chapter introduces the hardware installation process, including

the installation of the CPU, memory, power supply, slots, pin

headers and the mounting of jumpers. Caution should be exercised

during the installation of these modules. Please refer to the

motherboard layout prior to any installation and read the contents in

this chapter carefully.

This chapter includes the following information :

■ Install the CPU and CPU Cooler

■ Install the Memory

■ Install an Expansion Card

■ Install other Internal Connectors

■ Jumpers

Please visit the following website for more supporting information about your motherboard.

CPU Support List:

http://www.foxconnsupport.com/cpusupportlist.aspx

Memory, VGA Compatibility List:

http://www.foxconnsupport.com/complist.aspx

2-1 Install the CPU and CPU Cooler

Install the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Read the following guidelines before you begin to install the CPU :

■ Make sure that the motherboard supports the CPU.

■ Always turn off the computer and unplug the power cord from the power supply before

installing the CPU to prevent hardware damage.

■ Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or

you may locate the notches on both sides of the CPU and alignment keys on the CPU

socket.)

■ Apply an even and thin layer of thermal grease on the surface of the CPU.

■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating

and damage of the CPU may occur.

■ Set the CPU host frequency in accordance with the CPU specications. It is not

recommended that the system bus frequency be set beyond hardware specications

since it does not meet the standard requirements for the peripherals. If you wish to

set the frequency beyond the standard specications, please do so according to your

hardware specications including the CPU, graphics card, memory, hard drive, etc.

Hyper-Threading Technology System Requirements:

(Go to Intel's website for more information about the Hyper-Threading Technology)

■ An Intel

CPU that supports HT Technology

■ A chipset that supports HT Technology

■ An operating system that is optimized for HT Technology

■ A BIOS that supports HT Technology and has it enabled

CAUTION

LGA1155 CPU Socket

Alignment Key

Pin-1 corner of

the CPU Socket

LGA1155 CPU

Notch

Pin-1 triangle

marking of CPU

Follow the steps to install the CPU onto the CPU socket :

2. Lift the metal cover on the CPU

socket.

3. Remove protective socket cover.

5. When CPU is properly seated,

replace the metal cover and push the

CPU socket lever back to its locked

position.

4. Check pin one marking (triangle)

with the pin one corner of the CPU

socket, align the CPU notches with

the socket alignment keys and gently

put the CPU onto the socket.

Before installing the CPU, make sure to turn off the computer and unplug the power

cord from the power outlet to prevent damage to the CPU.

CAUTION

1. Release the CPU socket lever.

Install the CPU Cooler

Follow the steps below to correctly install the CPU cooler on the motherboard.

1. Apply and spread an even thermal

grease on the surface of CPU.

2. Place the four bolts of the CPU

cooler to the holes of the motherboard,

push them straight down from the top,

and the bolts will be fastened on the

motherboard. That's it.

3. Check the solder side of the

motherboard, the push pin should be

xed as depicted in the picture.

4. Attach the 4-wire CPU cooler

connector to the CPU FAN header

on the motherboard .

Release bolts of CPU cooler from

motherboard :

1.Turning the push pin (bolt)

along with the direction of arrow

(counterclockwise).

2. Pull the push pin straight up.

3. Turning push pin clockwise to its

default position.

Use extreme care when removing the CPU cooler because the thermal grease may

adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.

CAUTION

2-2 Install the Memory

Dual Channel Memory Conguration

This motherboard provides Four DDR3 memory sockets and supports Dual Channel Technology.

When memory is installed, the BIOS will automatically check the memory in your system.

Four DDR3 memory sockets are divided into two channels :

Channel 0 : DIMM1 , DIMM2

Channel 1 : DIMM3 , DIMM4

The combinations of DIMM modules are :

Read the following guidelines before you begin to install the memory :

■ Make sure that the motherboard supports the memory. It is recommended that memory

of the same capacity, brand, speed, and chips be used.

■ Always turn off the computer and unplug the power cord from the power outlet before

installing the memory to prevent hardware damage.

■ Memory modules have a foolproof design. A memory module can be installed in only

one direction. If you are unable to insert the memory, switch the direction.

CAUTION

DIMM1 DIMM2 DIMM3 DIMM4

Single Channel DS/SS - - -

Single Channel SS SS - -

Single Channel - - DS/SS -

Single Channel - - SS SS

Dual Channel DS/SS - DS/SS -

Dual Channel SS SS SS -

Dual Channel SS - SS SS

Dual Channel SS SS SS SS

(DS : Double Side, SS : Single Side, - : No Memory)

For this motherboard, DIMM(1,2), DIMM(3,4) are two pairs of channels. For Sandybridge

CPU, in each pair of DIMM channel, you need to install blue DIMM rst, then install

white DIMM the second. White DIMM can not function if no blue DIMM is installed.

(Please refer to the silkscreen next to the DIMM slots to identify the sequence of

DIMM(1,2, 3, 4) on the motherboard.)

1. If you want to install one memory module, you must install it in the blue slots (DIMM1

or DIMM3).

2. If you want to install two memory modules, for optimal compatibility and

reliability,recommended to install them in the blue slots (DIMM1 and DIMM3). It can

activate Channel Memory Technology.

3. If you want to install three memory modules, they must be single-sided,and two ofbe

installed in the blue slots (DIMM1 and DIMM3),they will run at DDR3 1066 only.

4. If you install four memory modules on this motherboard, they must be single-sided,will

run at DDR3 1066 only.

5. You can’t install the double-sided memory in the white slots (DIMM2 or DIMM4).

CAUTION

Installing a Memory

If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated

by a notch in the middle, so it can only t in one direction. Follow the steps below to correctly install

your memory modules into the sockets.

Step 1:

Spread the clips at both ends of the memory socket.

Place the memory module onto the socket, then put

your ngers on top edge of the module, and push

it down rmly and seat it vertically into the memory

socket.

Step 2:

The clips at both ends of the socket will snap into place

when the memory module is securely inserted.

Before installing a memory module, make sure to turn off the computer and unplug the

power cord from the power outlet to prevent damage to the memory module. Be sure to

install DDR3 DIMMs on this motherboard.

CAUTION

96-Pin

144-Pin

Notch

Page is loading ...

Foxconn H61M Series User manual

Brand: Foxconn

Model: H61M Series

Category: Motherboards

Type: User manual

This manual is also suitable for

H61M-S

Download PDF

report

Foxconn H61M Series User manual

This manual is also suitable for

Foxconn H61M Series User manual

Related papers

Other documents