PDA6845
2" Pipe Mounting Kit for PDA2801, PDA2802 , PD662, PD685, PD686
PRECISION DIGITAL CORPORATION
www.predig.com
KEY FEATURES
• Provides Convenient Way to Mount PDA2801,
PDA2802, PD662, PD685, PD686 to 1.5" or 2" Pipes
• Suitable for Horizontal or Vertical Pipes
• All Necessary Hardware Provided
• Available in Steel and 316 Stainless Steel
OVERVIEW
The PDA6845 provides a convenient way to mount Precision
Digital models PDA2801, PDA2802, PD662, PD685 and PD686
to horizontal or vertical 1.5" or 2" pipes. The mounting kits are
available in zinc plated steel and 316 stainless steel and include all
necessary hardware to mount the device to the pipe.
MOUNTING INSTRUCTIONS
1. Attach the mounting plate to the enclosure or meter with the
provided hardware. The holes for the enclosure or meter
mounting bolts are accessed by removing the enclosure lid.
2. Mount the plate to the pipe with the provided U-bolt and
hardware.
CONTENTS
• One 13 gauge steel or
stainless steel mounting plate
• Two (each) bolts, washers,
lock washers & nuts to mount
enclosure / meter to plate
• One U-bolt and two (each)
washers, lock washers &
nuts to mount plate to pipe
MOUNTING (Rear View)
MOUNTING HOLES LOCATION
Figure 2. Hole Location Table & Dimension Drawing: Inches (mm)
Hole ID Meter / Enclosure
1 PDA2801, PDA2802
2 PD686
3 PD685
4 PD662
Figure 1. Rear View of PDA6845 Pipe Mounting Kit
2 2
1 1
4 4
3 3
PRECISION DIGITAL CORPORATION
233 South Street • Hopkinton MA 01748 USA • Tel (800) 343-1001
PDA6845 2" Pipe Mounting Kit
LIM6845_B 12/20
www.predig.com
ORDERING INFORMATION
Model Description Plate Dimensions Inch (mm)
Weight lb (kg)
PDA6845 Steel 2" Pipe Mount Kit for PDA2801, PDA2802, PD662, PD685, PD686 8.20 x 4.10 X 0.90 (208 X 104 X 23)
0.95 (0.43)
PDA6845-SS Stainless Steel 2" Pipe Mount Kit for PDA2801, PDA2802, PD662, PD685, PD686 8.20 x 4.10 X 0.90 (208 X 104 X 23)
1.0 (0.45)
The PDA6845 may be used to mount the following products to 1.5" or 2" pipes:
1. PDA2801, PDA2802 Enclosures
2. PD662, PD685, PD686 NEMA 4X Loop-Powered Meters
Figure 3. PDA6845 with PD686 Mounted to 2" Vertical Pipe
Figure 4. PDA6845 with PD686 Mounted to 2" Horizontal Pipe
1.696
PRECISION DIGITAL
1.696
PRECISION DIGITAL
Mounting Plate
U-BoltU-Bolt
Pipe
Mounting Plate
U-Bolt
Pipe
DRAWINGS
Disclaimer
The information contained in this document is subject to change without notice. Precision
Digital Corporation makes no representations or warranties with respect to the contents
hereof, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. See Warranty Information and Terms & Conditions on www.predig.com
for complete details.
© 2020 Precision Digital Corporation. All rights reserved.
WARNING
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
/
