PVNTL53BT
LANDLINE TELEPHONE
With High Quality Bluetooth Speaker
USER MANUAL
2
Installation
1. Connect the telephone handset cord to the handset jack 1
2. Connect the telephone line cord to the line jack 2
3. Connect the other telephone line cord to the telephone wall socket
4. Adjust the desired level (L/H) of the ringer signal with the switch on the under side of the telephone
(see pictures below)
NOTE: When picking up the handset, if you can hear sound it means your connections are correct.
Back panel function
Before operation please makes sure the adapter (110W-220W) is connecting and power button is on
status, please check the LED indicator on keypad, it is in red color and which means it works well. OFF
means power shut o. See pictures below.
3
Keypad Panel Function
Parts Included
Your new telephone includes the following items:
1 Telephone Body
1 Telephone handset
1 Handset coil cord
1 Line cord
1 Owner’s manual
1 3.5mm jack cable
1 Adapter
1 Warranty card
4
How to Use
1. Tone/Pulse switch
On the bottom of telephone base is the P/T switchable dialer. If you have touch tone service then slide
the switch to the T (Tone) position; if you have rotary dial service then slide the switch to the P (Pulse)
position.
2. Making and Answering Calls
To get a dial tone or answer an incoming call, lift the handset. To hang up, either replace the handset
or simply press the HANDSET CRADLE.
Making calls via landline telephone
Pick up the handset, when you can hear sound which means the telephone works well, you can dial
out correspondent numbers you want via number button on keypad to talk with someone you want.
Receiving landline calls
When the landline number called, you can hear the telephone ring sound, pick up the handset to
receive the incoming calls directly.
Receiving mobile phone calls via Bluetooth
Once the smart phone search for telephone Bluetooth speaker, It will be displayed as PYLE SPEAKER,
once pairing successfully, When mobile phone called, you can hear the smart phone ring sound from
speaker, press “ ” button to receive incoming calls via speaker or pick up the handset to receive the
calls, at this time the LED light on keypad is in blue color. Press“ ” button again to nish calls.
3. Ringer H/L switch
You can choose the loudness of the ringing of the phone by the ringer switch located on the bottom
of telephone base to either H (High) or L (Low) position
4. Last Number Redial (REDIAL)
The feature may be used to speed dial the last number dialed. Simply pick up the handset listen for
dial tone and then momentarily press the REDIAL button, the last number dialed will dial out automat-
ically.
5. Flash Function (FLASH)
If you get a busy tone after entering the number, press the FLASH button rst, after hearing the dial
tone, institute a dial tone for another call.
Press the FLASH button to terminate a call, and institute a dial tone for another call to getting another
call from call waiting.
6. Charge for smart phone/iPod
This unit has a USB charging port. With a standard USB charging cable, connect the USB output termi-
nal port (CHARGING, see picture above) to charge the phone and iPod. (Output voltage DC 5V-2A)
5
How to Use Bluetooth
You can connect your Bluetooth phone or other devices to the telephone Bluetooth speaker
1. Connecting the adapter and the telephone Bluetooth will be on status
2. Use your Bluetooth phone or other devices search for the telephone Bluetooth speaker, It will be
displayed as PYLE SPEAKER
3. Connect your devices with PYLE SPEAKER, it will pair with unit automatically
4. Play music on your phone or other devices, sound will come from the speaker through the BLUE-
TOOTH
5. AUX external music player
Through the audio cable supplied with the unit, one end connected to the computer / phone or other
external audio player device, and the other end connected to the audio input (AUDIO INPUT) to play
music from an external audio device.
6. You can use the VOL+ /VOL- button to adjust the sound level for your devices. Or you can adjust the
music sound via your own phone or other devices.
Notes:
• The work distance range for Bluetooth is 10 meter, beyond this distance the music will be stuttering.
• When the telephone or your smart phones numbers called, the music will be pause automatically,
when you nish your calls, only press the“ ” button to continue your music play.
Troubleshooting
No dial tone
• The telephone line cord is not properly to connected the telephone jack or the Telephone
• Test the telephone in the dierent telephone wall socket if it works the rst wall socket may be
damaged
• If there is no sound through the speaker, please check with the VOL+/VOL- button and your own
devices.
Care and Maintenance
Use soft and dry cloth to clean the telephone, use polish for wood for polishing the wooden parts
1. Protect the telephone from the high temperature
2. Keep the telephone free from the dust and moisture; if it gets wet please wipe it dry immediately.
3. Don’t use any kind of chemical or any abrasive powder to clean the cabinet
4. Don’t use the telephone during the electrical storm; a lightning strike can cause serious damage
5. As extra protection to disconnect the telephone during electrical storms
/