keji COKW05BKR User manual

Brand: keji

Model: COKW05BKR

Type: User manual

The keji COKW05BKR wireless charging pad offers 5W standard wireless charging for Qi-enabled devices like iPhones, Samsung Galaxies, Google Pixels, and more. It features a compact design, LED indicator for charging status, and safety protections like temperature control and short circuit protection. Experience convenient wireless charging with the keji COKW05BKR.

Please Note: When wirelessly charging a device, the wireless

charger and your device may feel warm. This is a normal operating

condition and should not be cause for concern.

Model: COKW05BKR

Wireless Charging Pad

User Manual v1.0

Features

Wireless Charger Operation

 Using the included USB-A to USB-C cable, connect the wireless

charging pad to a USB wall charger (USB wall charger not included)

 It is recommended to use original or reputable 3rd party branded

USB wall chargers. For faster charging times it is recommended to

use a USB wall charger with a minimum of 2A output

 When connected to the USB charger, the LED will light RED to

indicate the charging pad is powered on and in stand-by mode

 Place your Qi enabled wireless phone on the charging pad and your

phone should start charging automatically

 The LED will be blue to indicate charging

 If your phone does not start charging, move your phone until the

correct position is found and your phone starts charging

 When your phone is fully charged, the Smart IC enables energy

saving trickle charge mode

• Only use original or reputable third party chargers and cables

•

Do not get wet to avoid causing short circuit damage and leakage

•

Do not use in extreme hot, humid or corrosive environments to

avoid short circuit damage and leakage

•

Do not place too close to magnetic strip or chip ID card to avoid

magnetic failure

•

Do not place within 20cm of implantable medical devices

(pacemaker, cochlear implant etc.) to avoid potential interference

• Do not clean with harmful chemicals or detergents

•

Misuse, dropping or excessive force may cause damage to the

charging stand

Important Safety Instructions

Specifications

 Wireless Standard: WPC/Qi (v1.2.4)

 Quantity of Wireless Charging Coils: Single Coil

 Input: DC 5V 2A

 Wireless Output: 5W

 Working Frequency: 110 to 205KHz

 Charging Distance: 3 to 8mm

 Charging Efﬁciency: >72%

 Dimensions: 99 x 99 x 6.2mm

 Weight: 65g

Made in China

 Supports 5W standard wireless charging for all Qi enabled devices

 No need to remove your protective case. Works with most cases

up to 3mm thick

 LED indicator to show charging status

 Smart IC enables energy saving mode when device is fully charged

 Full safety protection for your devices with temperature control,

voltage regulation & short circuit protection

 Includes 1.5m USB-A to USB-C cable to connect charging pad to

USB wall charger (USB wall charger not included)

Compatible with Qi-enabled devices* including

* Check with device manufacturer for Qi wireless compatibility

iPhone is a trademark of Apple

inc., registered in the U.S. and

other countries.

Compatibility

• Huawei Mate 30/20 Pro

• Huawei P30 Pro

• LG G8S/G7 ThinQ

• LG V30+/V40

• Samsung Note 10/9/8/5

• Sony Xperia XZ3/XZ2

• Google Pixel 4/4 XL/3/3 XL

• Xiaomi Mi 9/Mi Mix 3

• iPhone 11 Pro/11

• iPhone XS/XS Max/XR

• iPhone X/8/8 Plus

• Samsung S10/S9/S8/S7

keji COKW05BKR User manual

Brand: keji

Model: COKW05BKR

Type: User manual

Download PDF

report

keji COKW05BKR User manual

keji COKW05BKR User manual

Other documents